CSD25310Q2
- Ultra-Low Qg and Qgd
- Low On Resistance
- Low Thermal Resistance
- Pb-Free
- RoHS Compliant
- Halogen Free
- SON 2-mm × 2-mm Plastic Package
This 19.9 mΩ, –20 V P-Channel device is designed to deliver the lowest on resistance and gate charge in the smallest outline possible with excellent thermal characteristics in an ultra-low profile. Its low on resistance coupled with an extremely small footprint in a SON 2 mm × 2 mm plastic package make the device ideal for battery operated space constrained operations.
For all available packages, see the orderable addendum at the end of the data sheet.技術文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 9 類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | CSD25310Q2 20 V P-Channel NexFET Power MOSFETs datasheet (Rev. A) | PDF | HTML | 2014年 6月 5日 |
Application note | MOSFET Support and Training Tools (Rev. F) | PDF | HTML | 2024年 6月 14日 | |
Application note | Semiconductor and IC Package Thermal Metrics (Rev. D) | PDF | HTML | 2024年 3月 25日 | |
Application note | Using MOSFET Transient Thermal Impedance Curves In Your Design | PDF | HTML | 2023年 12月 18日 | |
Application note | QFN and SON PCB Attachment (Rev. C) | PDF | HTML | 2023年 12月 6日 | |
Application note | Using MOSFET Safe Operating Area Curves in Your Design | PDF | HTML | 2023年 3月 13日 | |
Application brief | Tips for Successfully Paralleling Power MOSFETs | PDF | HTML | 2022年 5月 31日 | |
Technical article | What type of ESD protection does your MOSFET include? | PDF | HTML | 2020年 6月 22日 | |
Application note | Ringing Reduction Techniques for NexFET High Performance MOSFETs | 2011年 11月 16日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
支援軟體
Quickly trade off size, cost and performance to select the optimal MOSFET based on application conditions.
參考設計
PMP9491 — 具有高效升壓轉換器的音訊播音器/可攜式喇叭參考設計。
PMP9491 is a 30W highly efficient and compact Portable Speaker/Audio Boom Box reference Design which can be used in 15W +15W Stereo or 30W Woofer Applications. The Power Source for the Design is 1 or 2 Li ion in Series . The design is broadly divided into three main stages:
- Highly efficient (...)
參考設計
TIDA-00466 — 雜訊抗擾電容式近距感測器系統參考設計
The FDC2214 proximity and capacitive sensing design demonstrates the use of TI's capacitive sensing technology to sense and detect the presence of various objects. The design is a complete hardware and firmware solution. The firmware processes the data from one proximity sensor and two (...)
電路圖: PDF
參考設計
TIDA-00757 — 使用 4 節 AA 電池並可實現 5 年以上電池壽命的智慧鎖參考設計
With the increasing number of building and home owners looking to retrofit smart locks (or electronic locks) to their building or home, wireless battery powered smart locks are becoming increasingly popular in today’s market. In a smart lock application, the high current motor and (...)
參考設計
TIDA-01067 — 具有壓力、濕度和溫度感測功能的智慧阻尼器控制參考設計
此參考設計旨在透過連線暖氣、通風與空調 (HVAC),對多個房間的舒適性進行控制。藉由感測溫度、濕度及壓力,即可在每個區域中進行獨立監控與氣流調整。此參考設計可將定風量 (CAV) 轉換為變風量 (VAV) 系統。收集到的資料可透過無線方式傳輸至智慧型恆溫器或閘道。可採用板載感測器進行預測性維護、縮短技術故障排除時間,並減少整體能源消耗。長久的電池續航力讓智慧阻尼器能持續運作多年,無需花費時間與金錢更換電池。
參考設計
TIDA-00998 — 適用於高架故障指示燈的能源採集和故障指示燈子系統參考設計
此參考設計展示了使用輔助電池或超級電容器,並從電流變壓器 (CT) 或太陽能電池收集能源以延長主要電池壽命的多種架構。最佳電源管理是利用有效率的 LED 驅動器來驅動 LED 串聯或並聯串,以控制強度實現一致的 360° 可見度。
參考設計
TIDA-050033 — 智慧電表 PLC 模組備援電源供應參考設計
The TIDA-050033 reference design demonstrates the backup power supply solution for smart meter PLC module. By using a cost-effective boost converter TLV61048, minimum operating voltage is extended to maximize super capacitor usage rate. Smaller size (lower capacitance) super capacitor could be (...)
參考設計
TIDA-01385 — 適用於故障指示燈且具備超級電容器的比流器能源採集參考設計
Power management for the energy harvesting, energy buffering and back-up power is a key challenge in the fault indicator design. The TIDA-01385 introduces a circuit about harvesting energy from a current transformer for the system load of a fault indicator while storing the extra energy in a super (...)
參考設計
PMP4496 — 具有快速充電器輸入的 USB-C DRP 行動電源參考設計
PMP4496 is a power bank reference design with a single USB type C dual role port (DRP). It can perform as a SINK or SOURCE. Role is automatically determined according to the external device attached. Fast charger input is also supported to save more charging time.
參考設計
PMP11536 — 具有快速充電器輸入的 USB-C DFP + 5V2A 行動電源參考設計
PMP11536 is a power bank reference design with a USB typc C DFP plus a USB type A port employing the boost mode of a Maxcharger. Fast charger input is also supported to save more charging time. It can detect the input port attach/detach events automatically, as well as the output ports.
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
WSON (DQK) | 6 | Ultra Librarian |
訂購與品質
內含資訊:
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊:
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。