產品詳細資料

Component type PMIC/LED Driver Rating Catalog Operating temperature range (°C) 0 to 70
Component type PMIC/LED Driver Rating Catalog Operating temperature range (°C) 0 to 70
HTQFP (PFD) 100 256 mm² 16 x 16
  • High-Efficiency, High-Current RGB LED Driver with High-Side Pump Functionality
  • Drivers for External Buck FETs up to 32 A
  • Drivers for External RGB Switches
  • 10-Bit Programmable Current per Channel
  • Inputs for Selecting Color-Sequential RGB LEDs
  • Generation of DMD High Voltage Supplies
  • Two High Efficiency Buck Converters to Generate the DLPC4422 controller and DMD Supply
  • A High Efficiency, 8-Bit Programmable Buck Converter (PWR6) for FAN Driver Application or General Purpose
  • Two LDOs Supplying Auxiliary Voltages
  • Analog MUX for Measuring Internal and External Nodes
  • Protections: Thermal Shutdown, Hot Die, Low Battery, and Undervoltage Lockout (UVLO)
  • High-Efficiency, High-Current RGB LED Driver with High-Side Pump Functionality
  • Drivers for External Buck FETs up to 32 A
  • Drivers for External RGB Switches
  • 10-Bit Programmable Current per Channel
  • Inputs for Selecting Color-Sequential RGB LEDs
  • Generation of DMD High Voltage Supplies
  • Two High Efficiency Buck Converters to Generate the DLPC4422 controller and DMD Supply
  • A High Efficiency, 8-Bit Programmable Buck Converter (PWR6) for FAN Driver Application or General Purpose
  • Two LDOs Supplying Auxiliary Voltages
  • Analog MUX for Measuring Internal and External Nodes
  • Protections: Thermal Shutdown, Hot Die, Low Battery, and Undervoltage Lockout (UVLO)

The DLPA4000 device is a highly-integrated power management driver. It is optimized for DLP® LED projector systems. The DLPA4000 supports projectors up to 32 A per LED with high-side pump functionality. An integrated, high-efficiency buck controller energizes the device. The drivers control switches support the sequencing of R, G, and B LEDs. The device contains five buck converters, two of which are dedicated for the DLPC4422 controller low-voltage supply. Another dedicated regulated supply energizes the DLPA200 DMD micromirror driver and the three timing critical DC supplies for the DMD: VBIAS, VRST, and VOFS.

The DLPA4000 device contains several auxiliary blocks. These blocks allow flexibility in LED projector system design. An 8-bit programmable buck converter can drive an RGB projector fan or make an auxiliary supply line. Two LDOs can generate a lower-current supply, up to 200 mA. These LDOs are specified to operate at 2.5 V and 3.3 V.

The serial protocol interface (SPI) addresses all blocks of the DLPA4000 device. These addressable features include: the generation of the system reset, power sequencing, input signals for sequentially selecting the active LED, IC self-protections, and an analog MUX for routing analog information to an external ADC.

The DLPA4000 device is a highly-integrated power management driver. It is optimized for DLP® LED projector systems. The DLPA4000 supports projectors up to 32 A per LED with high-side pump functionality. An integrated, high-efficiency buck controller energizes the device. The drivers control switches support the sequencing of R, G, and B LEDs. The device contains five buck converters, two of which are dedicated for the DLPC4422 controller low-voltage supply. Another dedicated regulated supply energizes the DLPA200 DMD micromirror driver and the three timing critical DC supplies for the DMD: VBIAS, VRST, and VOFS.

The DLPA4000 device contains several auxiliary blocks. These blocks allow flexibility in LED projector system design. An 8-bit programmable buck converter can drive an RGB projector fan or make an auxiliary supply line. Two LDOs can generate a lower-current supply, up to 200 mA. These LDOs are specified to operate at 2.5 V and 3.3 V.

The serial protocol interface (SPI) addresses all blocks of the DLPA4000 device. These addressable features include: the generation of the system reset, power sequencing, input signals for sequentially selecting the active LED, IC self-protections, and an analog MUX for routing analog information to an external ADC.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet DLPA4000 PMIC and High-Current LED Driver datasheet PDF | HTML 2018年 3月 21日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

光學模組

DLP-OMM-SEARCH — DLP® 產品第三方搜尋工具

To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)

封裝 引腳 下載
HTQFP (PFD) 100 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片