DRA718
- Architecture designed for infotainment applications
- Video, image, and graphics processing support
- Full-HD video (1920 × 1080p, 60 fps)
- Multiple video input and video output
- 2D and 3D graphics
- Arm® Cortex®-A15 microprocessor subsystem
- C66x floating-point VLIW DSP
- Fully object-code compatible with C67x and C64x+
- Up to thirty-two 16 × 16-bit fixed-point multiplies per cycle
- Up to 512KB of on-chip L3 RAM
- Level 3 (L3) and Level 4 (L4) interconnects
- DDR3/DDR3L Memory Interface (EMIF)
module
- Supports up to DDR-1333 (667 MHz)
- Up to 2GB across single chip select
- Dual Arm® Cortex®-M4 Image Processing Units (IPU)
- IVA-HD subsystem
- Display
subsystem
- Display controller With DMA engine and up to three pipelines
- HDMI™ encoder: HDMI 1.4a and DVI 1.0 compliant
- 2D-graphics accelerator
(BB2D) subsystem
- Vivante® GC320 core
- Video Processing Engine (VPE)
- Single-core PowerVR™ SGX544 3D GPU
- One Video Input Port (VIP) module
- Support for up to four multiplexed input ports
- General-Purpose Memory Controller (GPMC)
- Enhanced Direct Memory Access (EDMA) controller
- 2-port gigabit ethernet (GMAC)
- Up to two external ports
- Sixteen 32-bit general-purpose timers
- 32-Bit MPU watchdog timer
- Six high-speed inter-integrated circuit (I2C) ports
- HDQ™/1-Wire® interface
- Ten configurable UART/IrDA/CIR modules
- Four Multichannel Serial Peripheral Interfaces (McSPI)
- Quad SPI Interface (QSPI)
- Media Local Bus Subsystem (MLBSS)
- Eight Multichannel Audio Serial Port (McASP) modules
- SuperSpeed USB 3.0 dual-role device
- High-speed USB 2.0 dual-role device
- High-speed USB 2.0 on-the-go
- Four MultiMedia Card/Secure Digital/Secure Digital Input Output Interfaces (MMC™/SD®/SDIO)
- PCI Express® 3.0 subsystems with two 5-Gbps
lanes
- One 2-lane Gen2-compliant port
- or two 1-lane Gen2-compliant ports
- Dual Controller Area Network (DCAN)
modules
- CAN 2.0B protocol
- MIPI® CSI-2 camera serial interface
- Up to 186 General-Purpose I/O (GPIO) pins
- Device security features
- Hardware crypto accelerators and DMA
- Firewalls
- JTAG lock
- Secure keys
- Secure ROM and boot
- Customer programmable keys
- Power, reset, and clock management
- On-chip debug with CTools technology
- 28-nm CMOS technology
- 17 mm × 17 mm, 0.65-mm pitch, 538-pin BGA (CBD)
The DRA71x processor is offered in a 538-ball, 17×17-mm, 0.65-mm ball pitch (0.8mm spacing rules can be used on signals) with Via Channel™ Array (VCA) technology, ball grid array (BGA) package.
The architecture is designed to deliver high-performance concurrencies for automotive applications in a cost-effective solution, providing full scalability from the DRA75x ("Jacinto 6 EP" and "Jacinto 6 Ex"), DRA74x "Jacinto 6" and DRA72x "Jacinto 6 Eco" family of infotainment processors, including graphics, voice, HMI, multimedia and smartphone projection mode capabilities.
Programmability is provided by a single-core Arm Cortex-A15 RISC CPU with Arm Neon™ extensions and a TI C66x VLIW floating-point DSP core. The Arm processor lets developers keep control functions separate from other algorithms programmed on the DSP and coprocessors, thus reducing the complexity of the system software.
Additionally, TI provides a complete set of development tools for the Arm, and DSP, including C compilers and a debugging interface for visibility into source code execution.
Cryptographic acceleration is available in all devices. All other supported security features, including support for secure boot, debug security and support for trusted execution environment are available on High-Security (HS) devices. For more information about HS devices, contact your TI representative.
The DRA71x Jacinto 6 Entry processor family is qualified according to the AEC-Q100 standard.
The device features a simplified power supply rail mapping which enables lower cost PMIC solutions.
The DRA71x processor is offered in a 538-ball, 17×17-mm, 0.65-mm ball pitch (0.8mm spacing rules can be used on signals) with Via Channel™ Array (VCA) technology, ball grid array (BGA) package.
The architecture is designed to deliver high-performance concurrencies for automotive applications in a cost-effective solution, providing full scalability from the DRA75x ("Jacinto 6 EP" and "Jacinto 6 Ex"), DRA74x "Jacinto 6" and DRA72x "Jacinto 6 Eco" family of infotainment processors, including graphics, voice, HMI, multimedia and smartphone projection mode capabilities.
Programmability is provided by a single-core Arm Cortex-A15 RISC CPU with Neon extensions and a TI C66x VLIW floating-point DSP core. The Arm processor lets developers keep control functions separate from other algorithms programmed on the DSP and coprocessors, thus reducing the complexity of the system software.
Additionally, TI provides a complete set of development tools for the Arm, and DSP, including C compilers and a debugging interface for visibility into source code execution.
Cryptographic acceleration is available in all devices. All other supported security features, including support for secure boot, debug security and support for trusted execution environment are available on High-Security (HS) devices. For more information about HS devices, contact your TI representative.
The DRA71x Jacinto 6 Entry processor family is qualified according to the AEC-Q100 standard.
The device features are simplified power supply rail mapping which enables lower cost PMIC solutions.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
PROCESSOR-SDK-ANDROID-AUTOMOTIVE-DRA7X
處理器 SDK Linux Automotive 是 TI 的 Jacinto™ DRAx 資訊娛樂系統 SoC 系列的基礎軟體開發平台。軟體架構可讓使用者開發功能豐富的車載資訊娛樂系統解決方案,例如新一代汽車適用之可重新配置的數位儀表總成、整合式駕駛艙、車內資訊娛樂系統、無線數據通訊、後座娛樂等。SDK 是以通用處理器 SDK 平台為基礎。
焦點- 長期穩定 (LTS) Mainline Linux 核心支援
- U-Boot 開機載入程式支援
- Linaro GNU 編譯器系列 (GCC) 工具鏈
- Yocto Project™ OE Core 相容檔案系統
(...)
PROCESSOR-SDK-LINUX-AUTOMOTIVE-DRA7X — PROCESSOR-SDK-LINUX-AUTOMOTIVE-DRA7X
處理器 SDK Linux Automotive 是 TI 的 Jacinto™ DRAx 資訊娛樂系統 SoC 系列的基礎軟體開發平台。軟體架構可讓使用者開發功能豐富的車載資訊娛樂系統解決方案,例如新一代汽車適用之可重新配置的數位儀表總成、整合式駕駛艙、車內資訊娛樂系統、無線數據通訊、後座娛樂等。SDK 是以通用處理器 SDK 平台為基礎。
焦點- 長期穩定 (LTS) Mainline Linux 核心支援
- U-Boot 開機載入程式支援
- Linaro GNU 編譯器系列 (GCC) 工具鏈
- Yocto Project™ OE Core 相容檔案系統
(...)
PROCESSOR-SDK-RTOS-AUTOMOTIVE-DRA7X
處理器 SDK Linux Automotive 是 TI 的 Jacinto™ DRAx 資訊娛樂系統 SoC 系列的基礎軟體開發平台。軟體架構可讓使用者開發功能豐富的車載資訊娛樂系統解決方案,例如新一代汽車適用之可重新配置的數位儀表總成、整合式駕駛艙、車內資訊娛樂系統、無線數據通訊、後座娛樂等。SDK 是以通用處理器 SDK 平台為基礎。
焦點- 長期穩定 (LTS) Mainline Linux 核心支援
- U-Boot 開機載入程式支援
- Linaro GNU 編譯器系列 (GCC) 工具鏈
- Yocto Project™ OE Core 相容檔案系統
(...)
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
GHS-INTEGRITY-RTOS — Green Hills INTEGRITY RTOS
VCTR-3P-MICROSAR — 適用於微控制器和高性能電腦 (HPC) 的 Vector MICROSAR AUTOSAR 軟體
MICROSAR 與 DaVinci 產品系列透過適用於微控制器與 HPC 的精密嵌入式軟體和強大開發工具,簡化 ECU 開發。有了先進的基礎架構軟體,您即可為 ECU 建立最佳基礎,並利用相關工具簡化所有相關開發作業。MICROSAR 嵌入式軟體是根據 AUTOSAR 經典和適應性等相關標準所開發。軟體也適合符合最高 ASIL D 之 ISO 26262 標準的安全相關應用。此外,智慧網路安全功能可保護控制單元免受未經授權的存取和竄改。Vector 涵蓋所有汽車與其他工業應用的使用案例。對於配備高性能電腦的軟體定義車輛 (SDV),其可提供現代車輛作業系統,以做為開放式模組化軟體生態系統。
CLOCKTREETOOL — 適用於 Sitara、車用、視覺分析和數位訊號處理器的時脈樹工具
The Clock Tree Tool (CTT) for Sitara™ ARM®, Automotive, and Digital Signal Processors is an interactive clock tree configuration software that provides information about the clocks and modules in these TI devices. It allows the user to:
- Visualize the device clock tree
- Interact with clock tree (...)
TIDEP-01002 — 採用 Jacinto™ 車用處理器的物美價廉數位叢集汽車參考設計
Jacinto™ 汽車處理器數位儀表板汽車參考設計 (DCARD) 是一款適用於可重新配置數位儀表板系統的成本最佳化設計。 DCARD 是一款完整且獨立的 6 層 PCB 設計,可在 1920x720 解析度顯示器上實現 60fps 數位儀表板解決方案,同時最佳化整體系統 BOM。DCARD 還支援單區域音訊輸出,用於警示音、CAN 喚醒和乙太網路連線。可根據終端產品需求擴充額外功能。例如,提供攝影機輸入以整合後視攝影機或駕駛員監控,第二顯示器輸出可用於驅動抬頭顯示器 (HUD)。 系統電源管理經過最佳化,可將整體系統 BOM 降至最低,適用於可重新配置的數位儀表板應用。 (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| FCCSP (CBD) | 538 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。