產品詳細資料

Rating Catalog Architecture Integrated FET Control interface 3xPWM RDS(ON) (HS + LS) (mΩ) 480 Peak output current (A) 3 Vs (min) (V) 8 Vs ABS (max) (V) 65 Features Integrated FETs Operating temperature range (°C) -40 to 125
Rating Catalog Architecture Integrated FET Control interface 3xPWM RDS(ON) (HS + LS) (mΩ) 480 Peak output current (A) 3 Vs (min) (V) 8 Vs ABS (max) (V) 65 Features Integrated FETs Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4 VQFN (RHH) 36 36 mm² 6 x 6
  • Triple 1/2-H Bridge Driver IC
    • 3-Phase brushless DC Motors
    • Solenoid and Brushed DC Motors
  • High Current-Drive Capability: 2.5-A Peak
  • Low MOSFET ON-Resistance
  • Independent 1/2-H-Bridge Control
  • Uncommitted Comparator Can Be Used for Current Limit or Other Functions
  • Built-In 3.3-V 10-mA LDO Regulator
  • 8-V to 60-V Operating Supply-Voltage Range
  • Sleep Mode for Standby Operation
  • Small Package and Footprint
    • 28-Pin HTSSOP (PowerPAD Package)
    • 36-Pin VQFN

All trademarks are the property of their respective owners.

  • Triple 1/2-H Bridge Driver IC
    • 3-Phase brushless DC Motors
    • Solenoid and Brushed DC Motors
  • High Current-Drive Capability: 2.5-A Peak
  • Low MOSFET ON-Resistance
  • Independent 1/2-H-Bridge Control
  • Uncommitted Comparator Can Be Used for Current Limit or Other Functions
  • Built-In 3.3-V 10-mA LDO Regulator
  • 8-V to 60-V Operating Supply-Voltage Range
  • Sleep Mode for Standby Operation
  • Small Package and Footprint
    • 28-Pin HTSSOP (PowerPAD Package)
    • 36-Pin VQFN

All trademarks are the property of their respective owners.

The DRV8313 provides three individually controllable half-H-bridge drivers. The device is intended to drive a three-phase brushless-DC motor, although it can also be used to drive solenoids or other loads. Each output driver channel consists of N-channel power MOSFETs configured in a 1/2-H-bridge configuration. Each 1/2-H-bridge driver has a dedicated ground terminal, which allows independent external current sensing.

An uncommitted comparator is integrated into the DRV8313, which allows for the construction of current-limit circuitry or other functions.

Internal protection functions are provided for undervoltage, charge pump faults, overcurrent, short circuits, and overtemperature. Fault conditions are indicated by the nFAULT pin.

For all available packages, see the orderable addendum at the end of the data sheet.

The DRV8313 provides three individually controllable half-H-bridge drivers. The device is intended to drive a three-phase brushless-DC motor, although it can also be used to drive solenoids or other loads. Each output driver channel consists of N-channel power MOSFETs configured in a 1/2-H-bridge configuration. Each 1/2-H-bridge driver has a dedicated ground terminal, which allows independent external current sensing.

An uncommitted comparator is integrated into the DRV8313, which allows for the construction of current-limit circuitry or other functions.

Internal protection functions are provided for undervoltage, charge pump faults, overcurrent, short circuits, and overtemperature. Fault conditions are indicated by the nFAULT pin.

For all available packages, see the orderable addendum at the end of the data sheet.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的產品不同
DRV8311 現行 具有整合式 FET 的最大 24-V abs、3 至 20-V、三相無刷 DC 馬達驅動器 DRV8311 has a smaller package, integrated CSA and adjustable slew rate
DRV8316 現行 具整合式電流感測和整合式 FET 的 40-V 最大 8-A 峰值 3 相馬達驅動器 Features lower Rdson, adjustable slew rate, and integrated buck and CSAs
DRV8316C 現行 具整合式電流感測、FET 和強化 CSA 規格的 40-V 最大 8-A 峰值 3 相馬達驅動器 Features lower Rdson, adjustable slew rate, and integrated buck and CSAs
DRV8317 現行 具有整合式 FET 和電流感測的 24-V 最大值 5-A 峰值三相馬達驅動器 Features lower Rdson and smaller package for lower voltage and power applications

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 5
類型 標題 日期
* Data sheet DRV8313 2.5-A Triple 1/2-H Bridge Driver datasheet (Rev. D) PDF | HTML 2016年 4月 26日
Application note Best Practices for Board Layout of Motor Drivers (Rev. B) PDF | HTML 2021年 10月 14日
Application note Delay and Dead Time in Integrated MOSFET Drivers PDF | HTML 2021年 8月 23日
EVM User's guide DRV8313EVM User Guide (Rev. A) 2018年 10月 18日
Application note Sensored 3-Phase BLDC Motor Control Using MSP430 2011年 7月 20日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DRV8313EVM — DRV8313 評估模組

The DRV8313EVM (evaluation module) provides a cost effective, sensorless-solution for running a 3-phase BLDC motor in trapezoidal commutation.

使用指南: PDF
TI.com 無法提供
開發模組 (EVM) 的 GUI

SLVC465 DRV8313 Software

支援產品和硬體

支援產品和硬體

產品
BLDC 驅動器
DRV8313 具整合式 FET的 65-V 最大 3-A 峰值 3 相馬達驅動器
硬體開發
開發板
DRV8313EVM DRV8313 評估模組
模擬型號

DRV8313 IBIS Model

SLVMCV4.ZIP (19 KB) - IBIS Model
參考設計

TIDEP0025 — 適用於工業通訊和馬達控制的單晶片驅動

This reference design implements hardware interface based on the HEIDENHAIN EnDat 2.2 standard for position or rotary encoders. The platform also allows you to implement real-time EtherCAT communications standards in a broad range of industrial automation equipment. It enables designs with a low (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDEP0039 — 適用於 AM437x 通訊開發平台的 Sercos III 從屬功能參考設計

The TIDEP0039 Sercos III Slave For AM437x Communication Development Platform Reference Design combines the AM437x Sitara processor family from Texas Instruments (TI) and the Sercos III media access control (MAC) layer into a single system-on-chip (SoC) solution. Targeted for Sercos III slave (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDEP0022 — 具有整合式 BiSS C 主介面的 ARM MPU 參考設計

Implementation of BiSS C Master protocol on Industrial Communication Sub-System (PRU-ICSS). The design provides full documentation and source code for Programmable Realtime Unit (PRU).
Design guide: PDF
電路圖: PDF
參考設計

TIDEP0035 — 具有整合式 HIPERFACE DSL 主介面的 ARM MPU 參考設計

This reference design implements HIPERFACE DSL master protocol on Industrial Communication Sub-System (PRU-ICSS). The two-wire interface allows integration of position feedback wires into motor cable.  It consists of AM437x PRU-ICSS firmware and TIDA-00177 transceiver reference design.
Design guide: PDF
電路圖: PDF
參考設計

TIDEP0050 — EnDat 2.2 系統參考設計

This reference design implements EnDat 2.2 Master protocol stack and hardware interface based on HEIDENHAIN EnDat 2.2 standard for position or rotary encoders. The design is composed of EnDat 2.2 Master protocol stack, half-duplex communications using RS-485 transceivers and the line termination (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01362 — 使用 BLDC 馬達驅動器驅動三相步進馬達的參考設計

TIDA-01362 demonstrates how to drive a three phase stepper motor using the same hardware structure of a Brushless (BLDC) driver. By regulating the PWM signal schemes, the design achieves a smooth sinusoidal output current. DRV8313 device is used for the implementation of this design.
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00827 — 具備感測器的 2.5A 整合式 BLDC 馬達控制器參考設計

The TIDA-00827 is an integrated, sensored BLDC motor controller reference design suitable for low-powered, battery operated, brushless DC motor applications. An 8- to 35-V operating voltage range supports 3S to 6S LiPo battery supplies. Specific applications include camera gimbals, low power fans (...)
Test report: PDF
電路圖: PDF
參考設計

TIDA-00274 — 適用於無感測器梯形控制且具有成本效益的三相無刷 DC 驅動器參考設計

This reference evaluation module, featuring DRV8313, 3-phase driver with integrated MOSFETs and MSP430G2553 MCU, provides a cost effective sensor-less solution to run of 3-phase BLDC motor in trapezoidal commutation. Reference design software comes with easy to use GUI for quick evaluation.  (...)
Test report: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 28 Ultra Librarian
VQFN (RHH) 36 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片