DRV8899-Q1
- AEC-Q100 Qualified for Automotive
- Up to 1/256 microstepping
- Integrated current sense functionality
- No sense resistors required
- Smart tune decay technology, Fixed slow, and mixed decay options
- 4.5 to 45-V Operating supply voltage range
- Pin to pin RDS(ON) variants:
- DRV8889/A-Q1: 900 mΩ HS + LS at 25°C
- DRV8899-Q1: 1200 mΩ HS + LS at 25°C - High current capacity per bridge
- DRV8889/A-Q1: 2.4-A peak, 1.5-A full-scale
- DRV8899-Q1: 1.7-A peak, 1-A full-scale
- TRQ_DAC bits to scale full-scale current
- Configurable off-time PWM chopping
- Simple STEP/DIR interface
- SPI with daisy chain support
- Low-current sleep mode (2 µA)
- Programmable output slew rate
- Spread spectrum clocking to minimize EMI
- Protection features
- VM undervoltage lockout
- Overcurrent protection
- Open load detection
- Overtemperature warning and shutdown
- Undertemperature warning
- Fault condition indication pin (nFAULT)
- Functional Safety-Capable
The DRV8899-Q1 is a fully integrated stepper motor driver, supporting up to 1 A full scale current with an internal microstepping indexer, smart tune decay technology, and integrated current sensing. With a simple step/dir interface to manage the direction and step rate, DRV8899-Q1 supports up to 1/256 levels of microstepping to enable a smooth motion profile. Integrated current sensing eliminates the need for two external resistors, saving board space and cost. DRV8899-Q1 provides 8 decay mode options including: smart tune, slow, and mixed decay options. Smart tune automatically adjusts for optimal current regulation performance and compensates for any motor variation and aging effects. The device also includes an integrated torque DAC which allows for the controller to scale the output current through SPI without needing to scale the VREF voltage reference. A low-power sleep mode is provided for very low standby current using an nSLEEP pin. The device features full duplex, 4-wire synchronous SPI communication, with daisy chain support for up to 63 devices connected in series, for configurability and detailed fault reporting. View our full portfolio of stepper motor drivers on ti.com.
您可能會感興趣的類似產品
功能與所比較的裝置相似
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | DRV8899-Q1 Automotive Stepper Driver with Integrated Current Sense and 1/256 Micro-Stepping datasheet (Rev. B) | PDF | HTML | 2021年 4月 20日 |
| Application brief | Advantages of Integrated Current Sensing (Rev. B) | PDF | HTML | 2022年 6月 20日 | |
| Application note | Daisy Chain Implementation for Serial Peripheral Interface (Rev. A) | 2021年 4月 7日 | ||
| Functional safety information | DRV8899-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA | PDF | HTML | 2021年 3月 8日 | |
| Application note | Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) | PDF | HTML | 2021年 1月 19日 | |
| User guide | DRV8899-Q1EVM GUI User's Guide (Rev. A) | 2019年 10月 11日 | ||
| EVM User's guide | DRV8899-Q1 EMV User's Guide | 2019年 10月 3日 | ||
| White paper | How smart tune regulates current in stepper motors (Rev. A) | 2019年 3月 19日 | ||
| Application note | Protecting Automotive Motor Drive Systems from Reverse Polarity Conditions (Rev. A) | 2019年 2月 19日 | ||
| Application brief | Smart Tuning for Efficient Stepper Driving | 2018年 11月 20日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
DRV8899-Q1EVM — 具有整合式電流感測與 1/256 微型步進的車用步進驅動器 EVM
The DRV8899-Q1 evaluation module (EVM) allows easy evaluation of the DRV8899-Q1 device. The DRV8899-Q1 device is an integrated, dual H-bridge driver for automotive stepper motor applications.
The evaluation module allows the device to be configured for all of its functional modes including (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGE) | 24 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。