INA152

現行

單電源供電差分放大器

立即訂購

產品規格表

document-pdfAcrobat Single-Supply Difference Amplifier datasheet (英文)

INA152

現行

產品規格表

立即訂購

產品詳細資料

Number of channels

1

Vs (min) (V)

2.7

Vs (max) (V)

20

CMRR (min) (dB)

80

Common-mode input low (min) (V)

-20

Common-mode input high (max) (V)

18

Input offset (±) (max) (V)

0.0015

Iq (typ) (mA)

0.5

Slew rate (typ) (V/µs)

0.4

Voltage gain (min) (V/V)

1

Voltage gain (max) (V/V)

1

Small-signal bandwidth (typ) (Hz)

800000

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Gain drift (max) (ppm/°C)

1

Gain error (±) (max) (%)

0.1

Number of channels

1

Vs (min) (V)

2.7

Vs (max) (V)

20

CMRR (min) (dB)

80

Common-mode input low (min) (V)

-20

Common-mode input high (max) (V)

18

Input offset (±) (max) (V)

0.0015

Iq (typ) (mA)

0.5

Slew rate (typ) (V/µs)

0.4

Voltage gain (min) (V/V)

1

Voltage gain (max) (V/V)

1

Small-signal bandwidth (typ) (Hz)

800000

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Gain drift (max) (ppm/°C)

1

Gain error (±) (max) (%)

0.1

VSSOP (DGK)

8

14.7 mm² 3 x 4.9

SWING: to Within 200mV of Either Output Rail
LOW OFFSET DRIFT: ±3uV/°C
LOW OFFSET VOLTAGE: ±250uV
HIGH CMR: 94dB
LOW GAIN ERROR: 0.01%
LOW GAIN ERROR DRIFT: 1ppm/°C
WIDE SUPPLY RANGE:
Single: 2.7V to 20V
Dual: ±1.35V to ±10V
MSOP-8 PACKAGE
APPLICATIONS
- DIFFERENCE INPUT AMPLIFIER BUILDING BLOCK
- UNITY-GAIN INVERTING AMPLIFIER
- GAIN = 1/2
- AMPLIFIER GAIN = 2 AMPLIFIER
- SUMMING AMPLIFIER
- SYNCHRONOUS DEMODULATOR
- CURRENT AND DIFFERENTIAL LINE RECEIVER
- VOLTAGE-CONTROLLED CURRENT SOURCE
- BATTERY-POWERED SYSTEMS
- LOW-COST AUTOMOTIVE INSTRUMEN-TATION

SWING: to Within 200mV of Either Output Rail
LOW OFFSET DRIFT: ±3uV/°C
LOW OFFSET VOLTAGE: ±250uV
HIGH CMR: 94dB
LOW GAIN ERROR: 0.01%
LOW GAIN ERROR DRIFT: 1ppm/°C
WIDE SUPPLY RANGE:
Single: 2.7V to 20V
Dual: ±1.35V to ±10V
MSOP-8 PACKAGE
APPLICATIONS
- DIFFERENCE INPUT AMPLIFIER BUILDING BLOCK
- UNITY-GAIN INVERTING AMPLIFIER
- GAIN = 1/2
- AMPLIFIER GAIN = 2 AMPLIFIER
- SUMMING AMPLIFIER
- SYNCHRONOUS DEMODULATOR
- CURRENT AND DIFFERENTIAL LINE RECEIVER
- VOLTAGE-CONTROLLED CURRENT SOURCE
- BATTERY-POWERED SYSTEMS
- LOW-COST AUTOMOTIVE INSTRUMEN-TATION

The INA152 is a small (MSOP-8), low-power, unity-gain difference amplifier consisting of a CMOS op amp and a precision resistor network. The on-chip resistors are laser trimmed for accurate gain and high common-mode rejection. Excellent TCR tracking of the resistor maintains gain accuracy and common-mode rejection over temperature. The input common-mode voltage range extends to above the positive and negative rails and the output swings to within 50mV of either rail.

The difference amplifier is the foundation of many commonly used circuits. The INA152 provides precision circuit function without using an expensive precision network.

The INA152 is specified for operation over the extended industrial temperature range, \x9640°C to +85°C.

The INA152 is a small (MSOP-8), low-power, unity-gain difference amplifier consisting of a CMOS op amp and a precision resistor network. The on-chip resistors are laser trimmed for accurate gain and high common-mode rejection. Excellent TCR tracking of the resistor maintains gain accuracy and common-mode rejection over temperature. The input common-mode voltage range extends to above the positive and negative rails and the output swings to within 50mV of either rail.

The difference amplifier is the foundation of many commonly used circuits. The INA152 provides precision circuit function without using an expensive precision network.

The INA152 is specified for operation over the extended industrial temperature range, \x9640°C to +85°C.

filter

尋找其它差分放大器

下載