首頁 放大器 差分放大器
首頁
放大器
差分放大器

INA159

現行

高速 0.2 級精密增益轉換差動放大器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
INA592 現行 高精密 (40-μV 偏移)、2-MHz、88-dB CMRR、低功耗、e-trim™ 差分放大器 Higher precision version (e-Trim) with 36-V supply.

INA159

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Vs (min) (V) 1.8 Vs (max) (V) 5.5 CMRR (min) (dB) 86 Common-mode input low (min) (V) -12.5 Common-mode input high (max) (V) 17.5 Input offset (±) (max) (V) 0.0005 Iq (typ) (mA) 1.1 Slew rate (typ) (V/µs) 15 Voltage gain (min) (V/V) 0.2 Voltage gain (max) (V/V) 0.2 Small-signal bandwidth (typ) (Hz) 1500000 Rating Catalog Operating temperature range (°C) -40 to 125 Gain error (±) (max) (%) 0.024
Number of channels 1 Vs (min) (V) 1.8 Vs (max) (V) 5.5 CMRR (min) (dB) 86 Common-mode input low (min) (V) -12.5 Common-mode input high (max) (V) 17.5 Input offset (±) (max) (V) 0.0005 Iq (typ) (mA) 1.1 Slew rate (typ) (V/µs) 15 Voltage gain (min) (V/V) 0.2 Voltage gain (max) (V/V) 0.2 Small-signal bandwidth (typ) (Hz) 1500000 Rating Catalog Operating temperature range (°C) -40 to 125 Gain error (±) (max) (%) 0.024
VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • GAIN OF 0.2 TO INTERFACE ±10V SIGNALS TO SINGLE-SUPPLY ADCs
  • GAIN ACCURACY: ±0.024% (max)
  • WIDE BANDWIDTH: 1.5MHz
  • HIGH SLEW RATE: 15V/µs
  • LOW OFFSET VOLTAGE: ±100µV
  • LOW OFFSET DRIFT: ±1.5µV/°C
  • SINGLE-SUPPLY OPERATION DOWN TO 1.8V
  • APPLICATIONS
    • INDUSTRIAL PROCESS CONTROLS
    • INSTRUMENTATION
    • DIFFERENTIAL TO SINGLE-ENDED CONVERSION
    • AUDIO LINE RECEIVERS

All trademarks are the property of their respective owners.
  • GAIN OF 0.2 TO INTERFACE ±10V SIGNALS TO SINGLE-SUPPLY ADCs
  • GAIN ACCURACY: ±0.024% (max)
  • WIDE BANDWIDTH: 1.5MHz
  • HIGH SLEW RATE: 15V/µs
  • LOW OFFSET VOLTAGE: ±100µV
  • LOW OFFSET DRIFT: ±1.5µV/°C
  • SINGLE-SUPPLY OPERATION DOWN TO 1.8V
  • APPLICATIONS
    • INDUSTRIAL PROCESS CONTROLS
    • INSTRUMENTATION
    • DIFFERENTIAL TO SINGLE-ENDED CONVERSION
    • AUDIO LINE RECEIVERS

All trademarks are the property of their respective owners.

The INA159 is a high slew rate, G = 1/5 difference amplifier consisting of a precision op amp with a precision resistor network. The gain of 1/5 makes the INA159 useful to couple ±10V signals to single-supply analog-to-digital converters (ADCs), particularly those operating on a single +5V supply. The on-chip resistors are laser-trimmed for accurate gain and high common-mode rejection. Excellent temperature coefficient of resistance (TCR) tracking of the resistors maintains gain accuracy and common-mode rejection over temperature. The input common-mode voltage range extends beyond the positive and negative supply rails. It operates on +1.8V to +5.5V single or split supplies. The INA159 reference input uses two resistors for easy mid-supply or reference biasing.

The difference amplifier is the foundation of many commonly-used circuits. The INA159 provides this circuit function without using an expensive external precision resistor network. The INA159 is available in an MSOP-8 surface-mount package and is specified for operation over the extended industrial temperature range, -40°C to +125°C.

The INA159 is a high slew rate, G = 1/5 difference amplifier consisting of a precision op amp with a precision resistor network. The gain of 1/5 makes the INA159 useful to couple ±10V signals to single-supply analog-to-digital converters (ADCs), particularly those operating on a single +5V supply. The on-chip resistors are laser-trimmed for accurate gain and high common-mode rejection. Excellent temperature coefficient of resistance (TCR) tracking of the resistors maintains gain accuracy and common-mode rejection over temperature. The input common-mode voltage range extends beyond the positive and negative supply rails. It operates on +1.8V to +5.5V single or split supplies. The INA159 reference input uses two resistors for easy mid-supply or reference biasing.

The difference amplifier is the foundation of many commonly-used circuits. The INA159 provides this circuit function without using an expensive external precision resistor network. The INA159 is available in an MSOP-8 surface-mount package and is specified for operation over the extended industrial temperature range, -40°C to +125°C.
filter 尋找其它 差分放大器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
重要文件 類型 標題 格式選項 日期
* Data sheet High-Speed, Precision, Gain of 0.2 Level Translation Difference Amplifier datasheet (Rev. B) 2005年 10月 31日
E-book The Signal e-book: A compendium of blog posts on op amp design topics 2017年 3月 28日
Analog Design Journal A dual-polarity, bidirectional current-shunt monitor 2008年 10月 22日
Analog Design Journal Q4 2008 Issue Analog Applications Journal 2008年 10月 22日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DIFFAMP-EVM — 通用差分放大器評估模組

利用 DIFFAMP-EVM 可放心選擇差分放大器，並輕鬆評估與比較各裝置。此模組支援多種配置，可針對您所需的應用量身打造，以實現可靠評估。其提供 DIP 轉接器部件，無論 IC 封裝為何，都可進行評估。

附註：不包含差分放大器 IC
使用指南: PDF | HTML
TI.com 無法提供
開發板

DIP-ADAPTER-EVM — DIP 轉接器評估模組

Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.

The (...)

使用指南: PDF
TI.com 無法提供
模擬型號

INA159 TINA-TI Reference Design (Rev. B)

SBOC075B.TSC (107 KB) - TINA-TI Reference Design
下載
模擬型號

INA159 TINA-TI Spice Model (Rev. A)

SBOM161A.ZIP (6 KB) - TINA-TI Spice Model
下載
模擬型號

INA159 and INA159-EP PSpice Model (Rev. B)

SBOC074B.ZIP (27 KB) - PSpice Model
下載
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支援產品和硬體

支援產品和硬體
啟動 下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
參考設計

TIPD164 — 適用於工業輸出和溫度感測器的類比輸入模組參考設計

This reference design that is precision verified implements an analog input module for industrial voltages, currents and temperature sensors.  For industrial outputs, the possible input ranges include: 4 to 20 mA, 0 to 20 mA, +/-25 mA, 0 to 5 V, 0 to 10 V, +/-5 V and +/-10 V. The design (...)
使用指南: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSSOP (DGK) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片