首頁 放大器 儀器放大器
首頁
放大器
儀器放大器

INA166

現行

低噪音低失真 G=2000 儀表放大器

立即訂購
產品規格表

INA166

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Vs (max) (V) 36 Vs (min) (V) 9 Input offset (±) (max) (µV) 250 Voltage gain (min) (V/V) 2000 Voltage gain (max) (V/V) 2000 Noise at 1 kHz (typ) (nV√Hz) 1.3 Features Current Feedback, Ultra-low noise CMRR (min) (dB) 100 Input bias current (±) (max) (nA) 12000 Iq (typ) (mA) 10 Bandwidth at min gain (typ) (MHz) 0.45 Gain error (±) (max) (%) 1 Operating temperature range (°C) -55 to 125 Rating Catalog Type Fixed Gain Gain nonlinearity (±) (max) (%) 0.005 Output swing headroom (to negative supply) (typ) (V) 1.8 Output swing headroom (to positive supply) (typ) (V) -1.8 Input common mode headroom (to negative supply) (typ) (V) 3 Input common mode headroom (to positive supply) (typ) (V) -3
Number of channels 1 Vs (max) (V) 36 Vs (min) (V) 9 Input offset (±) (max) (µV) 250 Voltage gain (min) (V/V) 2000 Voltage gain (max) (V/V) 2000 Noise at 1 kHz (typ) (nV√Hz) 1.3 Features Current Feedback, Ultra-low noise CMRR (min) (dB) 100 Input bias current (±) (max) (nA) 12000 Iq (typ) (mA) 10 Bandwidth at min gain (typ) (MHz) 0.45 Gain error (±) (max) (%) 1 Operating temperature range (°C) -55 to 125 Rating Catalog Type Fixed Gain Gain nonlinearity (±) (max) (%) 0.005 Output swing headroom (to negative supply) (typ) (V) 1.8 Output swing headroom (to positive supply) (typ) (V) -1.8 Input common mode headroom (to negative supply) (typ) (V) 3 Input common mode headroom (to positive supply) (typ) (V) -3
SOIC (D) 14 51.9 mm² (8.65 mm × 6 mm)
  • LOW NOISE: 1.3nV/Hz at 1kHz
  • LOW THD+N: 0.09% at 1kHz
  • WIDE BANDWIDTH: 450kHz
  • WIDE SUPPLY RANGE: ±4.5V to ±18V
  • HIGH CMR: > 100dB
  • GAIN SET WITH EXTERNAL RESISTOR
  • SO-14 SURFACE-MOUNT PACKAGE
  • APPLICATIONS
    • MOVING-COIL TRANSDUCER AMPLIFIERS
    • DIFFERENTIAL RECEIVERS
    • BRIDGE TRANSDUCER AMPLIFIERS
    • MICROPHONE AND HYDROPHONE
      • PREAMPS
  • LOW NOISE: 1.3nV/Hz at 1kHz
  • LOW THD+N: 0.09% at 1kHz
  • WIDE BANDWIDTH: 450kHz
  • WIDE SUPPLY RANGE: ±4.5V to ±18V
  • HIGH CMR: > 100dB
  • GAIN SET WITH EXTERNAL RESISTOR
  • SO-14 SURFACE-MOUNT PACKAGE
  • APPLICATIONS
    • MOVING-COIL TRANSDUCER AMPLIFIERS
    • DIFFERENTIAL RECEIVERS
    • BRIDGE TRANSDUCER AMPLIFIERS
    • MICROPHONE AND HYDROPHONE
      • PREAMPS

The INA166 is a very low-noise, low-distortion, monolithic instrumentation amplifier. Its current-feedback circuitry achieves very wide bandwidth and excellent dynamic response over a wide range of gain. It is ideal for low-level signals such as microphones or hydrophones. Many industrial, instrumentation, and medical applications also benefit from its low noise and wide bandwidth.

Unique distortion cancellation circuitry reduces distortion to extremely low levels, even in high gain. The INA166 provides near-theoretical noise performance for 200 source impedance. Its differential input, low noise, and low distortion provide superior performance as a low-level signal amplifier.

The INA166 is available in a space-saving SO-14 surface-mount package, specified for operation over the \x9640°C to +85°C temperature range.

The INA166 is a very low-noise, low-distortion, monolithic instrumentation amplifier. Its current-feedback circuitry achieves very wide bandwidth and excellent dynamic response over a wide range of gain. It is ideal for low-level signals such as microphones or hydrophones. Many industrial, instrumentation, and medical applications also benefit from its low noise and wide bandwidth.

Unique distortion cancellation circuitry reduces distortion to extremely low levels, even in high gain. The INA166 provides near-theoretical noise performance for 200 source impedance. Its differential input, low noise, and low distortion provide superior performance as a low-level signal amplifier.

The INA166 is available in a space-saving SO-14 surface-mount package, specified for operation over the \x9640°C to +85°C temperature range.
filter 尋找其它 儀器放大器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但針腳輸出與所比較的裝置不同。
INA848 現行 具有 2000 固定增益的超低雜訊、高頻寬儀器放大器 Higher precision, wider bandwidth, higher slew rate, lower noise, and lower power

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 Low-Noise, Low-Distortion, G=2000 Instrumentation Amplifier datasheet 2000/11/18
應用說明 Importance of Input Bias Current Return Paths in Instrumentation Amplifier Apps PDF | HTML 2021/7/27
電子書 The Signal e-book: A compendium of blog posts on op amp design topics PDF | HTML 2017/3/28

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。

除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 14 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片