INA229
- High-resolution, 20-bit delta-sigma ADC
- Current monitoring accuracy:
- Offset voltage: ±1 µV (maximum)
- Offset drift: ±0.01 µV/°C (maximum)
- Gain error: ±0.05% (maximum)
- Gain error drift: ±20 ppm/°C (maximum)
- Common mode rejection: 154 dB (minimum)
- Power monitoring accuracy:
- 0.5% full scale, –40°C to +125°C (maximum)
- Energy and charge accuracy:
- 1.0% full scale (maximum)
- Fast alert response: 75 µs
- Wide common-mode range: –0.3 V to +85 V
- Bus voltage sense input: 0 V to 85 V
- Shunt full-scale differential range: ±163.84 mV / ±40.96 mV
- Input bias current: 2.5 nA (maximum)
- Temperature sensor: ±1°C (maximum at 25°C)
- Programmable resistor temperature compensation
- Programmable conversion time and averaging
- 10-MHz SPI communication interface
- Operates from a 2.7-V to 5.5-V
supply:
- Operational current: 640 µA (typical)
- Shutdown current: 5 µA (maximum)
The INA229 is an ultra-precise digital power monitor with a 20-bit delta-sigma ADC specifically designed for current-sensing applications. The device can measure a full-scale differential input of ±163.84 mV or ±40.96 mV across a resistive shunt sense element with common-mode voltage support from –0.3 V to +85 V.
The INA229 reports current, bus voltage, temperature, power , energy and charge accumulation while employing a precision ±0.5% integrated oscillator, all while performing the needed calculations in the background. The integrated temperature sensor is ±1°C accurate for die temperature measurement and is useful in monitoring the system ambient temperature.
The low offset and gain drift design of the INA229 allows the device to be used in precise systems that do not undergo multi-temperature calibration during manufacturing. Further, the very low offset voltage and noise allow for use in mA to kA sensing applications and provide a wide dynamic range without significant power dissipation losses on the sensing shunt element. The low input bias current of the device permits the use of larger current-sense resistors, thus providing accurate current measurements in the micro-amp range.
The device allows for selectable ADC conversion times from 50 µs to 4.12 ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | INA229 85-V, 20-Bit, Ultra-Precise Power/Energy/Charge Monitor With SPI Interface datasheet (Rev. A) | PDF | HTML | 2022/5/11 | ||
| 應用說明 | Using a PCB Copper Trace as a Current Sense Shunt Resistor (Rev. A) | PDF | HTML | 2026/4/27 | |||
| 應用說明 | Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers | PDF | HTML | 2024/11/18 | |||
| 應用說明 | Digital Interfaces for Current Sensing Devices (Rev. A) | PDF | HTML | 2021/9/30 | |||
| Application brief | Integrating the Current Sensing Signal Path (Rev. B) | PDF | HTML | 2021/9/29 | |||
| Application brief | Integrated, Current Sensing Analog-to-Digital Converter (Rev. A) | PDF | HTML | 2021/9/28 | |||
| 應用說明 | Getting Started with Digital Power Monitors (Rev. A) | PDF | HTML | 2021/9/2 | |||
| 證書 | INA229EVM EU RoHS Declaration of Conformity (DoC) (Rev. A) | 2020/12/16 | ||||
| Application brief | Energy and Power Monitoring with Digital Current Sensors | 2017/5/25 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
INA229_239EVM — INA229 & INA239 評估模組
此評估模組 (EVM) 是一款易於使用的平台，可評估 INA229 或 INA239 的主要功能與性能。
EVM 支援高達 10-A 的電流量測，並隨附圖形使用者介面 (GUI) 支援，可讀取及寫入裝置暫存器。
ASC-STUDIO-INA229 — ASC studio (SysConfig) for configuring all aspects of the INA229 current sensor
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。
除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。
CS-AMPLIFIER-ERROR-TOOL — Current Sense Amplifier Comparison and Error Tool
SBOR021 — Power Monitor Tool
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VSSOP (DGS) | 10 | Ultra Librarian |