首頁 放大器 電流感測放大器 配備整合式分流電阻器的類比電流感測放大器
首頁
放大器
電流感測放大器
配備整合式分流電阻器的類比電流感測放大器

INA250

現行

具整合式分流電阻器的 36V、雙向、精密電流感測放大器

立即訂購
產品規格表

INA250

現行
產品規格表 立即訂購

產品詳細資料

Common-mode voltage (max) (V) 36 Common-mode voltage (min) (V) 0 Input offset (±) (max) (µV) 20000, 30000, 50000, 100000 Gain error (%) 0.75 Gain error drift (±) (max) (ppm/°C) 45 CMRR (min) (dB) 100 Bandwidth (kHz) 11, 35, 50 Supply voltage (max) (V) 36 Supply voltage (min) (V) 2.7 Iq (max) (mA) 0.3 Features Bidirectional, Integrated Shunt, Low-side Capable Rating Catalog Operating temperature range (°C) -40 to 125
Common-mode voltage (max) (V) 36 Common-mode voltage (min) (V) 0 Input offset (±) (max) (µV) 20000, 30000, 50000, 100000 Gain error (%) 0.75 Gain error drift (±) (max) (ppm/°C) 45 CMRR (min) (dB) 100 Bandwidth (kHz) 11, 35, 50 Supply voltage (max) (V) 36 Supply voltage (min) (V) 2.7 Iq (max) (mA) 0.3 Features Bidirectional, Integrated Shunt, Low-side Capable Rating Catalog Operating temperature range (°C) -40 to 125
TSSOP (PW) 16 32 mm² 5 x 6.4
  • Precision Integrated Shunt Resistor:
    • Shunt Resistor: 2 mΩ
    • Shunt Resistor Tolerance: 0.1% (Max)
    • 15 A Continuous from –40°C to 85°C
    • 0°C to 125°C Temperature Coefficient: 10 ppm/°C
  • High Accuracy:
    • Gain Error (Shunt and Amplifier): 0.3% (Max)
    • Offset Current: 50 mA (Max, INA250A2)
  • Four Available Gains:
    • INA250A1: 200 mV/A
    • INA250A2: 500 mV/A
    • INA250A3: 800 mV/A
    • INA250A4: 2 V/A
  • Wide Common-Mode Range: –0.1 V to 36 V
  • Specified Operating Temperature: –40°C to 125°C
  • Precision Integrated Shunt Resistor:
    • Shunt Resistor: 2 mΩ
    • Shunt Resistor Tolerance: 0.1% (Max)
    • 15 A Continuous from –40°C to 85°C
    • 0°C to 125°C Temperature Coefficient: 10 ppm/°C
  • High Accuracy:
    • Gain Error (Shunt and Amplifier): 0.3% (Max)
    • Offset Current: 50 mA (Max, INA250A2)
  • Four Available Gains:
    • INA250A1: 200 mV/A
    • INA250A2: 500 mV/A
    • INA250A3: 800 mV/A
    • INA250A4: 2 V/A
  • Wide Common-Mode Range: –0.1 V to 36 V
  • Specified Operating Temperature: –40°C to 125°C

The INA250 is a voltage-output, current-sensing amplifier family that integrates an internal shunt resistor to enable high-accuracy current measurements at common-mode voltages that can vary from 0 V to 36 V, independent of the supply voltage. The device is a bidirectional, low- or high-side current-shunt monitor that allows an external reference to be used to measure current flowing in both directions through the internal current-sensing resistor sensor. The integration of the precision current-sensing resistor provides calibration equivalent measurement accuracy with ultra-low temperature drift performance and ensures an optimized Kelvin layout for the sensing resistor is always obtained.

The INA250 family is available in four output voltage scales: 200 mV/A, 500 mV/A, 800 mV/A, and 2 V/A. This device is fully tested and specified for continuous currents up to 10 amps at the maximum temperature of 125°C. The INA250 operates from a single 2.7-V to 36-V supply and draws a maximum of 300 µA of supply current. All INA250 gain versions are specified over the extended operating temperature range (–40°C to 125°C), and are available in a TSSOP-16 package.

The INA250 is a voltage-output, current-sensing amplifier family that integrates an internal shunt resistor to enable high-accuracy current measurements at common-mode voltages that can vary from 0 V to 36 V, independent of the supply voltage. The device is a bidirectional, low- or high-side current-shunt monitor that allows an external reference to be used to measure current flowing in both directions through the internal current-sensing resistor sensor. The integration of the precision current-sensing resistor provides calibration equivalent measurement accuracy with ultra-low temperature drift performance and ensures an optimized Kelvin layout for the sensing resistor is always obtained.

The INA250 family is available in four output voltage scales: 200 mV/A, 500 mV/A, 800 mV/A, and 2 V/A. This device is fully tested and specified for continuous currents up to 10 amps at the maximum temperature of 125°C. The INA250 operates from a single 2.7-V to 36-V supply and draws a maximum of 300 µA of supply current. All INA250 gain versions are specified over the extended operating temperature range (–40°C to 125°C), and are available in a TSSOP-16 package.
filter 尋找其它 配備整合式分流電阻器的類比電流感測放大器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 10
重要文件 類型 標題 格式選項 日期
* Data sheet INA250 36-V, Bidirectional, Precision Current Sense Amplifier With Integrated Shunt Resistor datasheet (Rev. C) PDF | HTML 2023年 9月 13日
Application note Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers PDF | HTML 2024年 11月 18日
Application brief Integrating the Current Sensing Resistor (Rev. D) PDF | HTML 2023年 4月 7日
E-book An Engineer's Guide to Current Sensing (Rev. B) 2022年 4月 12日
Selection guide Current Sense Amplifiers (Rev. E) 2021年 9月 20日
Application brief Precision, Low-Side Current Measurement (Rev. B) 2019年 3月 6日
Application brief Integrated-Resistor Current Sensors Simplify PCB Design 2017年 6月 30日
Application brief Benefits of Intergated Low Inductive Shunt for PWM Applications 2017年 6月 17日
Technical article How to get started with current sense amplifiers – part 3 PDF | HTML 2015年 7月 9日
Design guide 30-A Range Bidirectional Current Shunt Monitor Design Guide 2015年 6月 30日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

INA250EVM — INA250 電流分流監控器評估模組

INA250 is a family of current shunt monitor with integrated shunt. The INA250EVM (INA250AxEVM) is intended to provide basic functional evaluation of INA250A1, INA250A2, INA250A3 and INA250A4 devices in the family. The fixture layout is not intended to be a model for the target circuit, nor is it (...)

使用指南: PDF
TI.com 無法提供
模擬型號

INA250 TINA-TI Reference Design

SBOM964.TSC (612 KB) - TINA-TI Reference Design
下載
模擬型號

INA250 TINA-TI Spice Model

SBOM963.ZIP (33 KB) - TINA-TI Spice Model
下載
模擬型號

INA250A1 PSpice Model

SBOMBC7.ZIP (23 KB) - PSpice Model
下載
模擬型號

INA250A2 PSpice Model

SBOMBF7.ZIP (24 KB) - PSpice Model
下載
模擬型號

INA250A3 PSpice Model

SBOMBF5.ZIP (24 KB) - PSpice Model
下載
模擬型號

INA250A4 PSpice Model

SBOMBC3.ZIP (24 KB) - PSpice Model
下載
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支援產品和硬體

支援產品和硬體
啟動 下載
計算工具

CS-AMPLIFIER-ERROR-TOOL — Current Sense Amplifier Comparison and Error Tool

This Excel calculator provides a comparison between two and five of our standard current sense amplifiers, delivering a chart containing the basic parameters of each device. This calculator also takes system condition inputs from users such as common-mode voltage, supply voltage, shunt resistor (...)
支援產品和硬體

支援產品和硬體
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
參考設計

TIDA-00302 — 具瞬態穩定性的電流分流監控器參考設計

This high-side current shunt monitor is used to measure the voltage developed across a current-sensing resistor when current passes through it.

Additionally, an external protection circuit is implemented to provide surge and fast-transient protection and demonstrate the different immunity levels to (...)

Design guide: PDF
電路圖: PDF
參考設計

TIDA-010011 — 用於保護繼電器處理器模組的高效電源供應架構參考設計

此參考設計展示各種電源架構，可為需要 >1A 負載電流和高效率的應用處理器模組產生多重電壓軌。所需的電源是使用來自背板的 5、12 或 24-V DC 輸入所產生。電源供應器是使用配備整合式 FET 的 DC-DC 轉換器，以及具尺寸整合式電感器的電源模組所產生。此設計採用 HotRod™ 封裝類型，適合需要低 EMI 的應用。此外也最適合設計時間有限的應用。其他功能包括 DDR 終端穩壓器、輸入電源 OR-ing、電壓序列、用於過載保護的 eFuse，以及電壓和負載電流監控。此設計可搭配處理器、數位訊號處理器以及現場可編程邏輯閘陣列使用。已通過輻射發射測試，符合 A 類和 B 要求的 (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00614 — 30-A 範圍雙向電流分流監控器參考設計

This verified design can accurately measure current across a range of 30 A on a bus that carries up to 36-V common mode voltage over a range of -40°C to +85°C.  This design can measure current from 0 A to 30 A with a grounded reference or -30 A to 0 A with a 16-V reference.  The (...)
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TSSOP (PW) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片