首頁 放大器 儀器放大器
首頁
放大器
儀器放大器

INA333-Q1

現行

車用低功耗、零漂移、精密儀器放大器

立即訂購
產品規格表

INA333-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Vs (max) (V) 5.5 Vs (min) (V) 1.8 Input offset (±) (max) (µV) 25 Voltage gain (min) (V/V) 1 Voltage gain (max) (V/V) 1000 Noise at 1 kHz (typ) (nV√Hz) 50 Features Low power, Zero Drift CMRR (min) (dB) 96 Input offset drift (±) (max) (µV/°C) 0.1 Input bias current (±) (max) (nA) 0.28 Iq (typ) (mA) 0.05 Bandwidth at min gain (typ) (MHz) 0.15 Gain error (±) (max) (%) 0.25 Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Rating Automotive Type Resistor Gain nonlinearity (±) (max) (%) 0.001 Output swing headroom (to negative supply) (typ) (V) 0.05 Output swing headroom (to positive supply) (typ) (V) -0.05 Input common mode headroom (to negative supply) (typ) (V) 0.1 Input common mode headroom (to positive supply) (typ) (V) -0.1 Noise at 0.1 Hz to 10 Hz (typ) (µVPP) 1
Number of channels 1 Vs (max) (V) 5.5 Vs (min) (V) 1.8 Input offset (±) (max) (µV) 25 Voltage gain (min) (V/V) 1 Voltage gain (max) (V/V) 1000 Noise at 1 kHz (typ) (nV√Hz) 50 Features Low power, Zero Drift CMRR (min) (dB) 96 Input offset drift (±) (max) (µV/°C) 0.1 Input bias current (±) (max) (nA) 0.28 Iq (typ) (mA) 0.05 Bandwidth at min gain (typ) (MHz) 0.15 Gain error (±) (max) (%) 0.25 Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Rating Automotive Type Resistor Gain nonlinearity (±) (max) (%) 0.001 Output swing headroom (to negative supply) (typ) (V) 0.05 Output swing headroom (to positive supply) (typ) (V) -0.05 Input common mode headroom (to negative supply) (typ) (V) 0.1 Input common mode headroom (to positive supply) (typ) (V) -0.1 Noise at 0.1 Hz to 10 Hz (typ) (µVPP) 1
VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C ≤ T A ≤ +125°C
  • Functional Safety-Capable
  • Low offset voltage: 25 µV (maximum), G ≥ 100
  • Low drift: 0.1 µV/°C, G ≥ 100
  • Low noise: 50 nV/√ Hz, G ≥ 100
  • High CMRR: 96 dB (minimum), G ≥ 10
  • Low input bias current: 280 pA (maximum)
  • Supply range: 1.8 V to 5.5 V
  • Input voltage: (V–) + 0.1 V to (V+) – 0.1 V
  • Output range: (V–) + 0.05 V to (V+) – 0.05 V
  • Low quiescent current: 50 µA
  • Operating temperature: –40°C to +125°C
  • RFI filtered inputs
  • Package: 8-pin VSSOP
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C ≤ T A ≤ +125°C
  • Functional Safety-Capable
  • Low offset voltage: 25 µV (maximum), G ≥ 100
  • Low drift: 0.1 µV/°C, G ≥ 100
  • Low noise: 50 nV/√ Hz, G ≥ 100
  • High CMRR: 96 dB (minimum), G ≥ 10
  • Low input bias current: 280 pA (maximum)
  • Supply range: 1.8 V to 5.5 V
  • Input voltage: (V–) + 0.1 V to (V+) – 0.1 V
  • Output range: (V–) + 0.05 V to (V+) – 0.05 V
  • Low quiescent current: 50 µA
  • Operating temperature: –40°C to +125°C
  • RFI filtered inputs
  • Package: 8-pin VSSOP

The INA333-Q1 is a low-power, precision instrumentation amplifier offering excellent accuracy. The three-op-amp design, small size, and low power make this device an excellent choice for automotive applications that require precise measurements, such as current leakage detection. This INA333-Q1 is also a great choice for applications that use resistive bridge sensors.

A single external resistor sets any gain from 1 to 1000. The INA333-Q1 is designed to use an industry-standard gain equation: G = 1 + (100 kΩ / R G).

The INA333-Q1 provides very low offset voltage (25 µV, G ≥ 100), excellent offset voltage drift (0.1 µV/°C, G ≥ 100), and high common-mode rejection (96 dB at G ≥ 10). The device operates with power supplies as low as 1.8 V (±0.9 V), and quiescent current is only 50 µA. Auto-calibration techniques maintain excellent precision over the automotive temperature range. The INA333-Q1 provides a very low peak-to-peak noise of 1 µV.

The INA333-Q1 device is available in an 8-pin VSSOP package and is specified over the T A = –40°C to +125°C temperature range.

The INA333-Q1 is a low-power, precision instrumentation amplifier offering excellent accuracy. The three-op-amp design, small size, and low power make this device an excellent choice for automotive applications that require precise measurements, such as current leakage detection. This INA333-Q1 is also a great choice for applications that use resistive bridge sensors.

A single external resistor sets any gain from 1 to 1000. The INA333-Q1 is designed to use an industry-standard gain equation: G = 1 + (100 kΩ / R G).

The INA333-Q1 provides very low offset voltage (25 µV, G ≥ 100), excellent offset voltage drift (0.1 µV/°C, G ≥ 100), and high common-mode rejection (96 dB at G ≥ 10). The device operates with power supplies as low as 1.8 V (±0.9 V), and quiescent current is only 50 µA. Auto-calibration techniques maintain excellent precision over the automotive temperature range. The INA333-Q1 provides a very low peak-to-peak noise of 1 µV.

The INA333-Q1 device is available in an 8-pin VSSOP package and is specified over the T A = –40°C to +125°C temperature range.
filter 尋找其它 儀器放大器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
INA333 現行 低功耗、零漂移、精密儀器放大器 Industrial version with same AC and DC specifications.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
重要文件 類型 標題 格式選項 日期
* Data sheet INA333-Q1 Automotive, Zerø-Drift, micro-Power Instrumentation Amplifier datasheet (Rev. B) PDF | HTML 2023年 6月 12日
Functional safety information INA333-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2022年 7月 14日
Application note Importance of Input Bias Current Return Paths in Instrumentation Amplifier Apps PDF | HTML 2021年 7月 27日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

INAEVM — 通用儀器放大器評估模組

The universal INAEVM (Instrumentation Amplifier Evaluation Module) is available in two package options that simplify prototyping precision instrumentation amplifiers in either the SO-8 (D) package or the MSOP-8(DGK) package with the pinout shown.  See the chart in the user guide (...)

使用指南: PDF | HTML
View Options
模擬型號

INA333 PSpice Model (Rev. G)

SBOM382G.ZIP (26 KB) - PSpice Model
下載
模擬型號

INA333 TINA-TI Reference Design (Rev. F)

SBOC264F.TSC (1395 KB) - TINA-TI Reference Design
下載
模擬型號

INA333 TINA-TI Spice Model (Rev. E)

SBOM310E.ZIP (11 KB) - TINA-TI Spice Model
下載
模擬型號

INA333 Vcm vs Vout TINA-TI Model

SLOM383.TSC (70 KB) - TINA-TI Reference Design
下載
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支援產品和硬體

支援產品和硬體
啟動 下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSSOP (DGK) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片