INA600

現行

具有固定衰減比的 40V 寬共模電壓（-40V 至 85V）差動放大器

立即訂購

產品規格表

document-pdfAcrobat INA600 Low-Power, 2.7V to 40V Attenuating Difference Amplifier With >1MΩ Input Impedance for Cost-Optimized Designs datasheet (Rev. A) (英文) PDF | HTML

INA600

現行

產品規格表

立即訂購

產品詳細資料

Number of channels

1

Vs (min) (V)

2.7

Vs (max) (V)

40

CMRR (min) (dB)

89

Common-mode input low (min) (V)

-40

Common-mode input high (max) (V)

85

Input offset (±) (max) (V)

0.003

Iq (typ) (mA)

0.06

Slew rate (typ) (V/µs)

0.32

Voltage gain (min) (V/V)

0.028

Voltage gain (max) (V/V)

0.2

Small-signal bandwidth (typ) (Hz)

200000

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Gain drift (max) (ppm/°C)

5

Gain error (±) (max) (%)

0.05

Number of channels

1

Vs (min) (V)

2.7

Vs (max) (V)

40

CMRR (min) (dB)

89

Common-mode input low (min) (V)

-40

Common-mode input high (max) (V)

85

Input offset (±) (max) (V)

0.003

Iq (typ) (mA)

0.06

Slew rate (typ) (V/µs)

0.32

Voltage gain (min) (V/V)

0.028

Voltage gain (max) (V/V)

0.2

Small-signal bandwidth (typ) (Hz)

200000

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Gain drift (max) (ppm/°C)

5

Gain error (±) (max) (%)

0.05

SOT-23 (DBV)

6

8.12 mm² (2.9 mm × 2.8 mm)

Ultra-high input impedance: >1MΩ
Supply range: 2.7V (±1.35V) to 40V (±20V)
Input voltage range: (V–) – 40V to (V–) + 85V
Precision voltage monitoring in noisy systems:
- CMRR: 100dB (typical, G = 1/5)
- Gain error: ±0.01% (typical)
- Gain drift : ±1ppm/°C (typical)
Available gains:
- INA600A: 1/5
- INA600B: 1/10
- INA600C: 1/12
- INA600D: 1/18
- INA600E: 1/24
- INA600F: 1/36
–3dB bandwidth: ≥200kHz
Drives 400pF with ≤20% overshoot (typical)
Low quiescent current: 65µA (typical)
Specified temperature range: –40°C to +125°C

Ultra-high input impedance: >1MΩ
Supply range: 2.7V (±1.35V) to 40V (±20V)
Input voltage range: (V–) – 40V to (V–) + 85V
Precision voltage monitoring in noisy systems:
- CMRR: 100dB (typical, G = 1/5)
- Gain error: ±0.01% (typical)
- Gain drift : ±1ppm/°C (typical)
Available gains:
- INA600A: 1/5
- INA600B: 1/10
- INA600C: 1/12
- INA600D: 1/18
- INA600E: 1/24
- INA600F: 1/36
–3dB bandwidth: ≥200kHz
Drives 400pF with ≤20% overshoot (typical)
Low quiescent current: 65µA (typical)
Specified temperature range: –40°C to +125°C

The INA600 is a voltage-sensing difference amplifier with precision matched resistors that offer attenuating gain options. The precision matched integrated resistors saves BOM costs and board space by removing the need for precise and low tolerance external resistors.

The INA600 offers high input impedance of >1MΩ and low quiescent current of 65µA. The device can handle up to –40V to +85V of input voltage, attenuate the voltage down with great accuracy, and interface the voltage to the low voltage ADC while rejecting any common-mode errors such as ground bounce, switching ripples, AC mains and so forth. The device achieves a maximum gain error of ±0.05%, and a maximum gain drift of 5ppm/°C along with 89dB of minimum common-mode rejection ratio (G = 1/5).

This combination of specifications makes the INA600 a great choice for a variety of level translation, differential to single-ended applications, including any voltage monitoring of batteries or power rails. The INA600 interfaces directly to low-speed, analog-to-digital converters (ADC) and therefore is an excellent choice for replacing discrete implementation of difference amplifiers built with commodity amplifiers and discrete resistors. The INA600 is offered in standard 6-pin SOT-23 and SC70 packages.

The INA600 is a voltage-sensing difference amplifier with precision matched resistors that offer attenuating gain options. The precision matched integrated resistors saves BOM costs and board space by removing the need for precise and low tolerance external resistors.

The INA600 offers high input impedance of >1MΩ and low quiescent current of 65µA. The device can handle up to –40V to +85V of input voltage, attenuate the voltage down with great accuracy, and interface the voltage to the low voltage ADC while rejecting any common-mode errors such as ground bounce, switching ripples, AC mains and so forth. The device achieves a maximum gain error of ±0.05%, and a maximum gain drift of 5ppm/°C along with 89dB of minimum common-mode rejection ratio (G = 1/5).

This combination of specifications makes the INA600 a great choice for a variety of level translation, differential to single-ended applications, including any voltage monitoring of batteries or power rails. The INA600 interfaces directly to low-speed, analog-to-digital converters (ADC) and therefore is an excellent choice for replacing discrete implementation of difference amplifiers built with commodity amplifiers and discrete resistors. The INA600 is offered in standard 6-pin SOT-23 and SC70 packages.

filter

尋找其它差分放大器

下載觀看有字幕稿的影片影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 3

重要文件	類型	標題	格式選項		日期
*	資料表	INA600 Low-Power, 2.7V to 40V Attenuating Difference Amplifier With >1MΩ Input Impedance for Cost-Optimized Designs datasheet (Rev. A)	PDF \| HTML		2025/8/27
	類比設計期刊	比較離散式與整合式差動放大器	PDF \| HTML	PDF \| HTML	2026/5/1
	Product overview	INA600: Small-Size Voltage Monitoring Design with High Attenuation Ratios for Up to 85V Systems	PDF \| HTML		2025/12/11

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DIFFAMP-EVM — 通用差分放大器評估模組

利用 DIFFAMP-EVM 可放心選擇差分放大器，並輕鬆評估與比較各裝置。此模組支援多種配置，可針對您所需的應用量身打造，以實現可靠評估。其提供 DIP 轉接器部件，無論 IC 封裝為何，都可進行評估。

附註：不包含差分放大器 IC

使用指南: PDF | HTML

支援產品和硬體

有庫存

限制：

登入以進行訂購

lock

登入以檢視庫存

??asset.out-of-stock-ti_zh_TW??

無法提供

開發板

DIP-ADAPTER-EVM — DIP 轉接器評估模組

Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.

The (...)