首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 轉換器

LM22676-Q1

現行

3A SIMPLE SWITCHER，具備精密啟用功能的降壓型電壓穩壓器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同，但針腳輸出與所比較的裝置不同。
LMQ66430-Q1 現行 具 1.5-µA IQ 的汽車 36V、3-A、低 EMI 同步降壓轉換器 Integrated input bypass capacitor and boot cap for lower EMI and smaller footprint, dual-random spread spectrum and lower IQ.

LM22676-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Topology Buck Iout (max) (A) 3 Vin (max) (V) 42 Vin (min) (V) 4.5 Vout (max) (V) 37 Vout (min) (V) 1.285 Features Enable, Over Current Protection, Soft Start Fixed Control mode Voltage mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0034 Duty cycle (max) (%) 90
Rating Automotive Topology Buck Iout (max) (A) 3 Vin (max) (V) 42 Vin (min) (V) 4.5 Vout (max) (V) 37 Vout (min) (V) 1.285 Features Enable, Over Current Protection, Soft Start Fixed Control mode Voltage mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0034 Duty cycle (max) (%) 90
HSOIC (DDA) 8 29.4 mm² (4.9 mm × 6 mm) TO-263 (NDR) 7 142.3416 mm² (10.16 mm × 14.01 mm)
  • Wide Input Voltage Range: 4.5 V to 42 V
  • Internally Compensated Voltage Mode Control
  • Stable with Low ESR Ceramic Capacitors
  • 120 mΩ N-Channel MOSFET PFM Package
  • 100 mΩ N-Channel MOSFET PSOP-8 Package
  • Output Voltage Options:
    -ADJ (Outputs as Low as 1.285 V)
    -5.0 (Output Fixed to 5 V)
  • ±1.5% Feedback Reference Accuracy
  • Switching Frequency of 500 kHz
  • –40°C to 125°C Operating
    Junction Temperature Range
  • Precision Enable Pin
  • Integrated Boot-Strap Diode
  • Integrated Soft-Start
  • Fully WEBENCH® Enabled
  • LM22676Q is an Automotive Grade Product
    that is AEC-Q100 Grade 1 Qualified
    (–40°C to +125°C Operating Junction
    Temperature)
  • SO PowerPAD (Exposed Pad
  • PFM (Exposed Pad)
  • Wide Input Voltage Range: 4.5 V to 42 V
  • Internally Compensated Voltage Mode Control
  • Stable with Low ESR Ceramic Capacitors
  • 120 mΩ N-Channel MOSFET PFM Package
  • 100 mΩ N-Channel MOSFET PSOP-8 Package
  • Output Voltage Options:
    -ADJ (Outputs as Low as 1.285 V)
    -5.0 (Output Fixed to 5 V)
  • ±1.5% Feedback Reference Accuracy
  • Switching Frequency of 500 kHz
  • –40°C to 125°C Operating
    Junction Temperature Range
  • Precision Enable Pin
  • Integrated Boot-Strap Diode
  • Integrated Soft-Start
  • Fully WEBENCH® Enabled
  • LM22676Q is an Automotive Grade Product
    that is AEC-Q100 Grade 1 Qualified
    (–40°C to +125°C Operating Junction
    Temperature)
  • SO PowerPAD (Exposed Pad
  • PFM (Exposed Pad)

The LM22676 switching regulator provides all of the functions necessary to implement an efficient high voltage step-down (buck) regulator using a minimum of external components. This easy to use regulator incorporates a 42 V N-channel MOSFET switch capable of providing up to 3 A of load current. Excellent line and load regulation along with high efficiency (> 90%) are featured. Voltage mode control offers short minimum on-time, allowing the widest ratio between input and output voltages. Internal loop compensation means that the user is free from the tedious task of calculating the loop compensation components. Fixed 5 V output and adjustable output voltage options are available. A switching frequency of 500 kHz allows for small external components and good transient response. A precision enable input allows simplification of regulator control and system power sequencing. In shutdown mode the regulator draws only 25 µA (typ). Built in soft-start (500 µs, typ) saves external components. The LM22676 also has built in thermal shutdown, and current limiting to protect against accidental overloads.

The LM22676 is a member of Texas Instruments’ SIMPLE SWITCHER® family. The SIMPLE SWITCHER® concept provides for an easy to use complete design using a minimum number of external components and the TI WEBENCH® design tool. TI's WEBENCH® tool includes features such as external component calculation, electrical simulation, thermal simulation, and Build-It boards for easy design-in.

The LM22676 switching regulator provides all of the functions necessary to implement an efficient high voltage step-down (buck) regulator using a minimum of external components. This easy to use regulator incorporates a 42 V N-channel MOSFET switch capable of providing up to 3 A of load current. Excellent line and load regulation along with high efficiency (> 90%) are featured. Voltage mode control offers short minimum on-time, allowing the widest ratio between input and output voltages. Internal loop compensation means that the user is free from the tedious task of calculating the loop compensation components. Fixed 5 V output and adjustable output voltage options are available. A switching frequency of 500 kHz allows for small external components and good transient response. A precision enable input allows simplification of regulator control and system power sequencing. In shutdown mode the regulator draws only 25 µA (typ). Built in soft-start (500 µs, typ) saves external components. The LM22676 also has built in thermal shutdown, and current limiting to protect against accidental overloads.

The LM22676 is a member of Texas Instruments’ SIMPLE SWITCHER® family. The SIMPLE SWITCHER® concept provides for an easy to use complete design using a minimum number of external components and the TI WEBENCH® design tool. TI's WEBENCH® tool includes features such as external component calculation, electrical simulation, thermal simulation, and Build-It boards for easy design-in.
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 21
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LM22676/-Q1 42 V, 3 A SIMPLE SWITCHER® Step-Down Voltage Regulator with Features datasheet (Rev. L) PDF | HTML 2014/11/5
應用說明 SIMPLE SWITCHER Regulators Take Over Automotive Applications (Rev. B) PDF | HTML 2024/10/9
應用說明 Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 2024/3/25
應用說明 Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A) 2014/9/12
應用說明 AN-1997 Error Amplifier Limitations in High-Performance Regulator Applications (Rev. A) 2013/5/6
應用說明 AN-1533 Overvoltage Protection Circuit for Automotive Load Dump (Rev. B) 2013/5/6
應用說明 AN-1797 TO-263 THIN Package (Rev. A) 2013/4/24
應用說明 AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 2013/4/24
應用說明 AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 2013/4/23
應用說明 AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 2013/4/23
應用說明 AN-2020 Thermal Design By Insight, Not Hindsight (Rev. C) 2013/4/23
應用說明 AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 2013/4/23
應用說明 AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 2013/4/23
應用說明 AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013/4/23
應用說明 AN-1197 Selecting Inductors for Buck Converters (Rev. B) 2013/4/23
應用說明 AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C) 2013/4/23
應用說明 AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 2013/4/23
設計指南 SIMPLE SWITCHER® Design Guide 2011/4/11
應用說明 Input and Output Capacitor Selection 2005/9/19
更多文件說明 SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005/7/12
應用說明 AN-643 EMI/RFI Board Design (Rev. B) 2004/5/3

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM22670EVAL — 具有頻率調整或同步和精密啟用的 LM22670 3A SIMPLE SWITCHER 穩壓器 EVM

The LM22670 evaluation board is designed to demonstrate the capabilities of the LM22670 switching regulator. The LM22670 evaluation board is configured to provide an output voltage of 3.3V up to 3A load current with an input voltage range of 4.5V to 42V. Due to the low RDS(ON) of the integrated (...)

使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

LM22676-Q1-ADJ PSpice Transient Model

SNVM332.ZIP (129 KB) - PSpice 模型
支援產品和硬體
模擬型號

LM22676-Q1-ADJ Unencrypted PSpice Transient Model

SNVM821.ZIP (3 KB) - PSpice 模型
支援產品和硬體
計算工具

LM2267X-22680DESIGN-CALC — LM2267x、LM22680 快速入門 Simple Switcher 元件計算機

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HSOIC (DDA) 8 Ultra Librarian
TO-263 (NDR) 7 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片