LM321LV

現行

單路、5.5-V、1-MHz、3-mV 偏移電壓運算放大器

立即訂購

產品規格表

document-pdfAcrobat LM321LV, LM358LV, LM324LV Industry Standard, Low Voltage Operational Amplifiers datasheet (Rev. E) (英文) PDF | HTML

LM321LV

現行

產品規格表

立即訂購

產品詳細資料

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.7

Rail-to-rail

In to V-

GBW (typ) (MHz)

1

Slew rate (typ) (V/µs)

1.5

Vos (offset voltage at 25°C) (max) (mV)

3

Iq per channel (typ) (mA)

0.09

Vn at 1 kHz (typ) (nV√Hz)

40

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

4

Features

Cost Optimized, EMI Hardened, Standard Amps

CMRR (typ) (dB)

92

Iout (typ) (A)

0.04

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

-1

Output swing headroom (to negative supply) (typ) (V)

0.04

Output swing headroom (to positive supply) (typ) (V)

-1

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.7

Rail-to-rail

In to V-

GBW (typ) (MHz)

1

Slew rate (typ) (V/µs)

1.5

Vos (offset voltage at 25°C) (max) (mV)

3

Iq per channel (typ) (mA)

0.09

Vn at 1 kHz (typ) (nV√Hz)

40

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

4

Features

Cost Optimized, EMI Hardened, Standard Amps

CMRR (typ) (dB)

92

Iout (typ) (A)

0.04

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

-1

Output swing headroom (to negative supply) (typ) (V)

0.04

Output swing headroom (to positive supply) (typ) (V)

-1

SOT-23 (DBV)

5

8.12 mm² (2.9 mm × 2.8 mm)

SOT-SC70 (DCK)

5

4.2 mm² (2 mm × 2.1 mm)

Industry standard amplifier for cost-sensitive systems
Low input offset voltage: ±1 mV
Common-mode voltage range includes ground
Unity-gain bandwidth: 1 MHz
Low broadband noise: 40 nV/√Hz
Low quiescent current: 90 µA/Ch
Unity-gain stable
Operational at supply voltages from 2.7 V to 5.5 V
Offered in single, dual, and quad channel variants
Robust ESD specification: 2-kV HBM
Extended temperature range: –40°C to 125°C

Industry standard amplifier for cost-sensitive systems
Low input offset voltage: ±1 mV
Common-mode voltage range includes ground
Unity-gain bandwidth: 1 MHz
Low broadband noise: 40 nV/√Hz
Low quiescent current: 90 µA/Ch
Unity-gain stable
Operational at supply voltages from 2.7 V to 5.5 V
Offered in single, dual, and quad channel variants
Robust ESD specification: 2-kV HBM
Extended temperature range: –40°C to 125°C

The LM3xxLV family includes the single LM321LV, dual LM358LV, and quad LM324LV operational amplifiers, or op amps. The devices operate from a low voltage of 2.7 V to 5.5 V.

These op amps supply an alternative to the LM321, LM358, and LM324 in low-voltage applications that are sensitive to cost. Some applications are large appliances, smoke detectors, and personal electronics. The LM3xxLV devices supply better performance than the LM3xx devices at low voltage, and have lower power consumption. The op amps are stable at unity gain, and do not have reverse phase in overdrive conditions. The design for ESD gives the LM3xxLV family an HBM specification for a minimum of 2 kV.

The LM3xxLV family is available in packages that have industry standards. The packages include SOT-23, SOIC, VSSOP, and TSSOP packages.

The LM3xxLV family includes the single LM321LV, dual LM358LV, and quad LM324LV operational amplifiers, or op amps. The devices operate from a low voltage of 2.7 V to 5.5 V.

These op amps supply an alternative to the LM321, LM358, and LM324 in low-voltage applications that are sensitive to cost. Some applications are large appliances, smoke detectors, and personal electronics. The LM3xxLV devices supply better performance than the LM3xx devices at low voltage, and have lower power consumption. The op amps are stable at unity gain, and do not have reverse phase in overdrive conditions. The design for ESD gives the LM3xxLV family an HBM specification for a minimum of 2 kV.

The LM3xxLV family is available in packages that have industry standards. The packages include SOT-23, SOIC, VSSOP, and TSSOP packages.

filter

尋找其它一般用途運算放大器

下載觀看有字幕稿的影片影片

您可能會感興趣的類似產品

open-in-new

比較替代產品

針腳對針腳的功能與所比較的裝置相同。

LMV321A

現行

單路、5.5-V、1-MHz、4-mV 偏移電壓、RRO 運算放大器 Faster slew rate (1.7 V/us), lower power (0.08 mA), lower noise (33 nV/√Hz)

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 1

重要文件	類型	標題	格式選項	下載最新的英文版本		日期
*	資料表	LM321LV, LM358LV, LM324LV Industry Standard, Low Voltage Operational Amplifiers datasheet (Rev. E)	PDF \| HTML			2022/2/11

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

AMP-PDK-EVM — 放大器性能開發套件評估模組

放大器性能開發套件 (PDK) 是一款評估模組 (EVM) 套件，可測試通用運算放大器 (op amp) 參數，並與大多數運算放大器和比較器相容。EVM 套件提供主板和多個插槽式子卡選項，可滿足封裝需求，使工程師能夠快速評估和驗證裝置性能。

AMP-PDK-EVM 套件支援五種最熱門的業界標準封裝，包括：

D (SOIC-8 和 SOIC-14)
PW (TSSOP-14)
DGK (VSSOP-8)
DBV (SOT23-5 和 SOT23-6)
DCK (SC70-5 和 SC70-6)

使用指南: PDF | HTML

支援產品和硬體

檢視選項

開發板

DIP-ADAPTER-EVM — DIP 轉接器評估模組

Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.

The (...)

支援產品和硬體

有庫存

限制：

登入以進行訂購

lock

登入以檢視庫存

??asset.out-of-stock-ti_zh_TW??

無法提供

開發板

DIYAMP-EVM — 通用自製 (DIY) 放大器電路評估模組

DIYAMP-EVM 是一系列評估模組 (EVM)，提供工程師與自組愛好者 (DIYers) 實作型放大器電路，協助快速驗證設計概念並模擬結果。提供三種業界標準封裝（SC70、SOT-23 和 SOIC）與 12 種常見放大器配置，支援單電源與雙電源架構的放大器、濾波器、穩定補償與比較器應用。

DIYAMP-EVM 可快速製作電路原型，並採用常見的 0805 或 0603 表面裝載元件。透過多種組合方式，此 EVM 可建立從簡單放大器電路到複雜訊號鏈的各種評估電路。此 EVM 支援模擬板、超微型 A 版 (SMA)、接頭和有線介面連接方式，並與大多數類比數位轉換器 (ADC) (...)

使用指南: PDF | HTML

支援產品和硬體

檢視選項

模擬型號