LM34925
- Wide 7.5-V to 100-V Input Range
- Integrated 100-mA High-Side,
and Low-Side Switches - No Schottky Required
- Constant On-Time Control
- No Loop Compensation Required
- Ultra-Fast Transient Response
- Nearly Constant Operating Frequency
- Intelligent Peak Current Limit
- Adjustable Output Voltage From 1.225 V
- Precision 2% Feedback Reference
- Frequency Adjustable to 1 MHz
- Adjustable Undervoltage Lockout (UVLO)
- Remote Shutdown
- Thermal Shutdown
- Packages:
- 8-Pin WSON
- 8-Pin SO PowerPAD™
The LM34925 regulator features all of the functions needed to implement a low cost,
efficient, isolated bias regulator. This high voltage regulator contains two 100-V N-Channel MOSFET
switches: a high-side buck switch and a low-side synchronous switch. The constant-on-time (COT)
control scheme employed in the LM34925 device requires no loop compensation and provides excellent
transient response. The regulator operates with an on-time that is inversely proportional to the
input voltage. This feature allows the operating frequency to remain relatively constant. An
intelligent peak current limit is implemented with integrated sense circuit. Other features include
a programmable input under voltage comparator to inhibit operation during low-voltage conditions.
Protection features include thermal shutdown and VCC undervoltage lockout
(UVLO). The LM34925 device is offered in 8-pin WSON and
8-pin SO PowerPAD plastic packages.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | LM34925 Integrated Secondary-Side Bias Regulator for Isolated DC-DC Converters datasheet (Rev. G) | PDF | HTML | 2017/11/20 | ||
| 選擇指南 | Power Management Guide 2018 (Rev. R) | 2018/6/25 | ||||
| 類比設計期刊 | Fly-Buck(TM) converter provides EMC and isolation in PLC applications | 2015/1/29 | ||||
| 應用說明 | AN-2292 Designing an Isolated Buck (Fly-Buck) Converter (Rev. C) | 2014/12/17 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
LM34925EVAL — LM34925 隔離偏壓電源評估模組
FLYBUCK-FLYBACK-DESIGN-CALC — Flybuck / Flyback Calculator
此工具協助電源供應工程師根據規格選擇正確的隔離式 DC-DC 拓撲結構。根據選擇的拓撲結構,計算機還會推薦適合設計的 IC。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WSON (NGU) | 8 | Ultra Librarian |
| HSOIC (DDA) | 8 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。