產品詳細資料

Features Adjustable BW/IQ/IOUT Number of channels 2 Vs (max) (V) 22 Vs (min) (V) 5 BW at Acl (MHz) 400 Slew rate (typ) (V/µs) 60 Iq per channel (typ) (mA) 18.5 Gain (max) (dB) 100 Rating Catalog Architecture Current FB Operating temperature range (°C) 0 to 70
Features Adjustable BW/IQ/IOUT Number of channels 2 Vs (max) (V) 22 Vs (min) (V) 5 BW at Acl (MHz) 400 Slew rate (typ) (V/µs) 60 Iq per channel (typ) (mA) 18.5 Gain (max) (dB) 100 Rating Catalog Architecture Current FB Operating temperature range (°C) 0 to 70
SOIC (D) 14 51.9 mm² 8.65 x 6
  • User Programmable Gain Bandwidth Product, Slew Rate, Input Bias Current, Output Stage Biasing Current and Total Device Power Dissipation
  • High Gain Bandwidth Product (ISET = 0.5 mA)
    • 400 MHz for AV = 10 to 100
    • 30 MHz for AV = 1
  • High Slew Rate (ISET = 0.5 mA)
    • 60 V/μs for AV = 10 to 100
    • 30 V/μs for AV = 1
  • Current Differencing Inputs Allow High Common-Mode Input Voltages
  • Operates from a Single 5V to 22V Supply
  • Large Inverting Amplifier Output Swing, 2 mV to VCC − 2V
  • Low Spot Noise, 6 nV /√Hz, for f > 1 kHz

All trademarks are the property of their respective owners.

  • User Programmable Gain Bandwidth Product, Slew Rate, Input Bias Current, Output Stage Biasing Current and Total Device Power Dissipation
  • High Gain Bandwidth Product (ISET = 0.5 mA)
    • 400 MHz for AV = 10 to 100
    • 30 MHz for AV = 1
  • High Slew Rate (ISET = 0.5 mA)
    • 60 V/μs for AV = 10 to 100
    • 30 V/μs for AV = 1
  • Current Differencing Inputs Allow High Common-Mode Input Voltages
  • Operates from a Single 5V to 22V Supply
  • Large Inverting Amplifier Output Swing, 2 mV to VCC − 2V
  • Low Spot Noise, 6 nV /√Hz, for f > 1 kHz

All trademarks are the property of their respective owners.

The LM359 consists of two current differencing (Norton) input amplifiers. Design emphasis has been placed on obtaining high frequency performance and providing user programmable amplifier operating characteristics. Each amplifier is broadbanded to provide a high gain bandwidth product, fast slew rate and stable operation for an inverting closed loop gain of 10 or greater. Pins for additional external frequency compensation are provided. The amplifiers are designed to operate from a single supply and can accommodate input common-mode voltages greater than the supply.

The LM359 consists of two current differencing (Norton) input amplifiers. Design emphasis has been placed on obtaining high frequency performance and providing user programmable amplifier operating characteristics. Each amplifier is broadbanded to provide a high gain bandwidth product, fast slew rate and stable operation for an inverting closed loop gain of 10 or greater. Pins for additional external frequency compensation are provided. The amplifiers are designed to operate from a single supply and can accommodate input common-mode voltages greater than the supply.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet LM359 Dual, High Speed, Programmable, Current Mode (Norton) Amplifiers datasheet (Rev. C) 2013年 3月 26日
E-book The Signal e-book: A compendium of blog posts on op amp design topics 2017年 3月 28日
Application note AN-278 Designing with a New Super Fast Dual Norton Amplifier (Rev. B) 2013年 4月 23日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

LM359 PSPICE Model (Rev. A)

SNVM007A.ZIP (19 KB) - PSpice Model
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
封裝 引腳 下載
SOIC (D) 14 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片