首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 轉換器

LM3678

現行

適用手持應用的高性能、微型 1.5A 降壓 DC-DC 轉換器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同，但針腳輸出與所比較的裝置不同。
TPS62825 現行 採用 1.5-mm x 1.5-mm QFN 封裝，具有 1% 準確度的 2.4-V 至 5.5-V 輸入、2-A 降壓轉換器 Smaller solution size with higher output voltage range 0.6 V to 4 V

LM3678

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 1.5 Vin (max) (V) 5.5 Vin (min) (V) 2.5 Vout (max) (V) 1.2 Vout (min) (V) 0.8 Features Adaptive/Dynamic Voltage Scaling, Enable, Power good, Synchronous Rectification Control mode Voltage mode Operating temperature range (°C) -30 to 85 Iq (typ) (A) 0.0004 Duty cycle (max) (%) 100
Rating Catalog Topology Buck Iout (max) (A) 1.5 Vin (max) (V) 5.5 Vin (min) (V) 2.5 Vout (max) (V) 1.2 Vout (min) (V) 0.8 Features Adaptive/Dynamic Voltage Scaling, Enable, Power good, Synchronous Rectification Control mode Voltage mode Operating temperature range (°C) -30 to 85 Iq (typ) (A) 0.0004 Duty cycle (max) (%) 100
WSON (DSC) 10 9 mm² (3 mm × 3 mm)
  • VOUT = 0.8 V or 1.2 V
  • VIN = 2.5 V to 5.5 V
  • 1.5-A Maximum Load Capability
  • 3.3-MHz (Typical) PWM Fixed Switching Frequency Allows Use of 1-µH Inductor
  • ±3% DC Output Voltage Precision
  • 0.01-µA (Typical) Shutdown Current
  • Internal Synchronous Rectification for High Efficiency
  • Internal Soft Start
  • Current Overload and Thermal Shutdown Protection

All trademarks are the property of their respective owners.

  • VOUT = 0.8 V or 1.2 V
  • VIN = 2.5 V to 5.5 V
  • 1.5-A Maximum Load Capability
  • 3.3-MHz (Typical) PWM Fixed Switching Frequency Allows Use of 1-µH Inductor
  • ±3% DC Output Voltage Precision
  • 0.01-µA (Typical) Shutdown Current
  • Internal Synchronous Rectification for High Efficiency
  • Internal Soft Start
  • Current Overload and Thermal Shutdown Protection

All trademarks are the property of their respective owners.

The LM3678 step-down DC-DC converter is optimized for powering low-voltage circuits from a single Li-Ion cell battery and input voltage rails from 2.5 V to 5.5 V. It provides up to 1.5-A load current, over the entire input voltage range. LM3678 offers a 0.8V or 1.2V option. One of the pair of voltages is set through the VSELECT pin.

LM3678 operates in PWM mode with a fixed frequency of 3.3 MHz. Internal synchronous rectification provides high efficiency during PWM mode operation. In shutdown mode, the device turns off and reduces battery consumption to 0.01 µA (typical).

The LM3678 is available in a 3mm x 3mm DSC-10 package. A high switching frequency of 3.3 MHz (typical) allows use of tiny surface-mount components. Only three external surface-mount components, an inductor and two ceramic capacitors, are required (solution size less than 33 mm2). For voltages other than the voltage shown, contact TI or your distributor.

The LM3678 step-down DC-DC converter is optimized for powering low-voltage circuits from a single Li-Ion cell battery and input voltage rails from 2.5 V to 5.5 V. It provides up to 1.5-A load current, over the entire input voltage range. LM3678 offers a 0.8V or 1.2V option. One of the pair of voltages is set through the VSELECT pin.

LM3678 operates in PWM mode with a fixed frequency of 3.3 MHz. Internal synchronous rectification provides high efficiency during PWM mode operation. In shutdown mode, the device turns off and reduces battery consumption to 0.01 µA (typical).

The LM3678 is available in a 3mm x 3mm DSC-10 package. A high switching frequency of 3.3 MHz (typical) allows use of tiny surface-mount components. Only three external surface-mount components, an inductor and two ceramic capacitors, are required (solution size less than 33 mm2). For voltages other than the voltage shown, contact TI or your distributor.
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 H-Perform, Mini 1.5-A Step-Dwn DC-DC Cnvrtr for Handheld Apps datasheet (Rev. C) 2013/5/2
選擇指南 Power Management Guide 2018 (Rev. R) 2018/6/25

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

封裝 針腳 CAD 符號、佔位空間與 3D 模型
WSON (DSC) 10 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片