首頁 電源管理 AC/DC 切換穩壓器 AC/DC 控制器

LM5020

現行

13-100V 大範圍 Vin、電流模式 PWM 升壓、返馳 Sepic 控制器

產品詳細資料

Topology Boost, Flyback, Forward, SEPIC Control mode current mode Features Enable, Frequency synchronization, Nonsynchronous rectification, Pre-Bias Start-Up Duty cycle (max) (%) 80 Sector Test & measurement
Topology Boost, Flyback, Forward, SEPIC Control mode current mode Features Enable, Frequency synchronization, Nonsynchronous rectification, Pre-Bias Start-Up Duty cycle (max) (%) 80 Sector Test & measurement
VSSOP (DGS) 10 14.7 mm² (3 mm × 4.9 mm) WSON (DPR) 10 16 mm² (4 mm × 4 mm)
  • Internal Start-up Bias Regulator
  • Error Amplifier
  • Precision Voltage Reference
  • Programmable Softstart
  • 1A Peak Gate Driver
  • Maximum Duty Cycle Limiting (80% for LM5020-1 or 50% for LM5020-2)
  • Programmable Line Under Voltage Lockout (UVLO) with Adjustable Hysteresis
  • Cycle-by-Cycle Over-Current Protection
  • Slope Compensation (LM5020-1)
  • Programmable Oscillator Frequency with Synchronization Capability
  • Current Sense Leading Edge Blanking
  • Thermal Shutdown Protection

  • Internal Start-up Bias Regulator
  • Error Amplifier
  • Precision Voltage Reference
  • Programmable Softstart
  • 1A Peak Gate Driver
  • Maximum Duty Cycle Limiting (80% for LM5020-1 or 50% for LM5020-2)
  • Programmable Line Under Voltage Lockout (UVLO) with Adjustable Hysteresis
  • Cycle-by-Cycle Over-Current Protection
  • Slope Compensation (LM5020-1)
  • Programmable Oscillator Frequency with Synchronization Capability
  • Current Sense Leading Edge Blanking
  • Thermal Shutdown Protection

The LM5020 high voltage pulse-width-modulation (PWM) controller contains all of the features needed to implement single ended primary power converter topologies. Output voltage regulation is based on current-mode control, which eases the design of loop compensation while providing inherent line feed-forward. The LM5020 includes a high-voltage start-up regulator that operates over a wide input range up to 100V. The PWM controller is designed for high speed capability including an oscillator frequency range to 1MHz and total propagation delays less than 100ns. Additional features include an error amplifier, precision reference, line under-voltage lockout, cycle-by-cycle current limit, slope compensation, softstart, oscillator synchronization capability and thermal shutdown. The controller is available in both MSOP-10 and LLP-10 packages.


The LM5020 high voltage pulse-width-modulation (PWM) controller contains all of the features needed to implement single ended primary power converter topologies. Output voltage regulation is based on current-mode control, which eases the design of loop compensation while providing inherent line feed-forward. The LM5020 includes a high-voltage start-up regulator that operates over a wide input range up to 100V. The PWM controller is designed for high speed capability including an oscillator frequency range to 1MHz and total propagation delays less than 100ns. Additional features include an error amplifier, precision reference, line under-voltage lockout, cycle-by-cycle current limit, slope compensation, softstart, oscillator synchronization capability and thermal shutdown. The controller is available in both MSOP-10 and LLP-10 packages.


下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 7
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LM5020 100V Current Mode PWM Controller datasheet (Rev. F) 2006/4/14
選擇指南 Power Management Guide 2018 (Rev. R) 2018/6/25
技術文章 Flyback converters: two outputs are better than one PDF | HTML 2016/11/24
技術文章 What is behind isolated DC/DC converter voltage regulation? PDF | HTML 2015/8/31
使用指南 Dual Output Isolated Flyback Design:User Guide 2012/1/27
應用說明 An Alternative Approach to Higher-Power Boost Converters 2009/11/30
白皮書 PWM DC-DC Cntrllrs w/Built-In Strt-Up Regs Simp Switch Pwr Supply Design 2005/10/1

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM5020EVAL — 100V 電流模式 PWM 控制器返馳評估板

100V Current Mode PWM Controller Flyback Evaluation Board

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

PSEMTHR24EVM-081 — 適用於 24 埠 IEEE 802.3bt 就緒 PSE 系統的主機板

PSEMTHR24EVM-081 是 TPS23881 和 TPS23882 PSE 控制器的基板。此電路板包含 24 組 2 對 / 4 對埠,可用於為 IEEE 802.3at 應用傳送高達 30W/埠的功率,以及為 IEEE 802.3bt 應用傳送高達 90W/埠的功率。

支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

LM5020 Unencrypted PSpice Transient Model

SNVM011.ZIP (579 KB) - PSpice 模型
支援產品和硬體
計算工具

FLYBUCK-FLYBACK-DESIGN-CALC — Flybuck / Flyback Calculator

此工具協助電源供應工程師根據規格選擇正確的隔離式 DC-DC 拓撲結構。根據選擇的拓撲結構,計算機還會推薦適合設計的 IC。

支援產品和硬體

許多 TI 參考設計包含 LM5020

使用我們的參考設計選擇工具,以檢視並找出最適合您的應用和參數的設計。

封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSSOP (DGS) 10 Ultra Librarian
WSON (DPR) 10 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片