LM5148

現行

3.5-V 至 80-V、電流模式同步降壓轉換器

產品詳細資料

Vin (min) (V) 3.5 Vin (max) (V) 80 Iout (max) (A) 20 Operating temperature range (°C) -40 to 125 Control mode current mode Topology Buck Rating Catalog Vout (min) (V) 0.8 Vout (max) (V) 55 Features Adjustable current limit, Enable, Frequency synchronization, Light Load Efficiency, Load Disconnect, Phase Interleaving, Power good, Pre-Bias Start-Up, Spread Spectrum, Synchronous Rectification Iq (typ) (µA) 9 Duty cycle (max) (%) 99 Number of phases 2
Vin (min) (V) 3.5 Vin (max) (V) 80 Iout (max) (A) 20 Operating temperature range (°C) -40 to 125 Control mode current mode Topology Buck Rating Catalog Vout (min) (V) 0.8 Vout (max) (V) 55 Features Adjustable current limit, Enable, Frequency synchronization, Light Load Efficiency, Load Disconnect, Phase Interleaving, Power good, Pre-Bias Start-Up, Spread Spectrum, Synchronous Rectification Iq (typ) (µA) 9 Duty cycle (max) (%) 99 Number of phases 2
VQFN (RGY) 24 19.25 mm² 5.5 x 3.5
  • Functional Safety-Capable
  • Integrated EMI mitigation
    • Selectable dual random spread spectrum (DRSS) feature for enhanced EMI performance across low and high-frequency bands
    • Optimized for CISPR 32 Class B requirements
  • Versatile synchronous buck DC/DC controller
    • Wide input voltage range of 3.5 V to 80 V
    • 1% accurate, fixed 3.3 V, 5 V, 12 V, or adjustable output from 0.8 V to 55 V
    • 150°C maximum junction temperature
    • Lossless DCR or shunt current sensing
    • Shutdown mode current of 2.3 µA
    • No-load sleep current of 9.5 µA
    • Internal soft-start ramp of 3 ms
    • Stackable up to two phases
    • Internal bootstrap diode
  • Switching frequency from 100 kHz to 2.2 MHz
    • SYNC in and SYNC out capability
    • Selectable PFM or FPWM modes
  • Inherent protection features for robust design
    • Internal hiccup mode overcurrent protection
    • ENABLE and PGOOD functions
    • VCC, VDDA, and gate-drive UVLO protection
    • Internal or external loop compensation
    • Thermal shutdown protection with hysteresis
  • Create a custom design using the LM5148 with WEBENCH Power Designer
  • Functional Safety-Capable
  • Integrated EMI mitigation
    • Selectable dual random spread spectrum (DRSS) feature for enhanced EMI performance across low and high-frequency bands
    • Optimized for CISPR 32 Class B requirements
  • Versatile synchronous buck DC/DC controller
    • Wide input voltage range of 3.5 V to 80 V
    • 1% accurate, fixed 3.3 V, 5 V, 12 V, or adjustable output from 0.8 V to 55 V
    • 150°C maximum junction temperature
    • Lossless DCR or shunt current sensing
    • Shutdown mode current of 2.3 µA
    • No-load sleep current of 9.5 µA
    • Internal soft-start ramp of 3 ms
    • Stackable up to two phases
    • Internal bootstrap diode
  • Switching frequency from 100 kHz to 2.2 MHz
    • SYNC in and SYNC out capability
    • Selectable PFM or FPWM modes
  • Inherent protection features for robust design
    • Internal hiccup mode overcurrent protection
    • ENABLE and PGOOD functions
    • VCC, VDDA, and gate-drive UVLO protection
    • Internal or external loop compensation
    • Thermal shutdown protection with hysteresis
  • Create a custom design using the LM5148 with WEBENCH Power Designer

The LM5148 is a 80-V, ultra-low IQ synchronous buck DC/DC controller for high-current, single-output applications. The controller uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. The LM5148 can be set up in idual-phase mode (paralleled output) with accurate current sharing for high-current applications. It can operate at input voltages as low as 3.5 V, at nearly 100% duty cycle if needed.

The LM5148 has a unique EMI reduction feature known as dual random spread spectrum (DRSS). Combining low-frequency triangular and high-frequency random modulations mitigates EMI disturbances across lower and higher frequency bands, respectively. This hybrid technique aligns with the multiple resolution bandwidth (RBW) settings specified in industry-standard EMC tests.

Additional features of the LM5148 include 150°C maximum junction temperature operation, user-selectable diode emulation for lower current consumption at light-load conditions, open-drain power-good flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated VCC bias supply regulator, internal 3-ms soft-start time, and thermal shutdown protection with automatic recovery.

The LM5148 controller comes in a 3.5-mm × 5.5-mm thermally enhanced, 24-pin VQFN package.

The LM5148 is a 80-V, ultra-low IQ synchronous buck DC/DC controller for high-current, single-output applications. The controller uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. The LM5148 can be set up in idual-phase mode (paralleled output) with accurate current sharing for high-current applications. It can operate at input voltages as low as 3.5 V, at nearly 100% duty cycle if needed.

The LM5148 has a unique EMI reduction feature known as dual random spread spectrum (DRSS). Combining low-frequency triangular and high-frequency random modulations mitigates EMI disturbances across lower and higher frequency bands, respectively. This hybrid technique aligns with the multiple resolution bandwidth (RBW) settings specified in industry-standard EMC tests.

Additional features of the LM5148 include 150°C maximum junction temperature operation, user-selectable diode emulation for lower current consumption at light-load conditions, open-drain power-good flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated VCC bias supply regulator, internal 3-ms soft-start time, and thermal shutdown protection with automatic recovery.

The LM5148 controller comes in a 3.5-mm × 5.5-mm thermally enhanced, 24-pin VQFN package.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
LM5148-Q1 現行 具有超低 IQ 的車用 80V 同步降壓 DC/DC 控制器 Automotive version

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 5
類型 標題 日期
* Data sheet LM5148 80-V, Synchronous, Buck DC/DC Controller with Ultra-Low IQ and Dual Random Spread Spectrum datasheet PDF | HTML 2023年 2月 15日
Application note Controller to Converter – Design Considerations for 24V and 48V Systems PDF | HTML 2024年 10月 2日
Application note How to Implement a Simple Constant Current Regulation Scheme to a PCM Based Buck PDF | HTML 2023年 8月 16日
Functional safety information LM5148 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2023年 2月 15日
User guide LM25149-Q1 EVM User's Guide (Rev. A) PDF | HTML 2022年 4月 29日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM25149-Q1EVM-2100 — LM25149-Q1 5.5-V 至 36-V 低 IQ、同步降壓 DC/DC 控制器評估模組

LM25149-Q1EVM-2100 高密度評估模組 (EVM) 的設計目的在於展示 LM25149-Q1 高性能、車用同步降壓 DC/DC 降壓控制器。此評估模組可以在 5.5 V 至 36 V 的廣泛輸入電壓範圍內運作,可提供高於 1% 設定點準確度,及高達 8-A 輸出電流的固定 5-V 輸出。LM25149-Q1 提供先進 EMI 性能和超低 IQ。發生故障期間的穩壓器功能包括:電壓過低鎖定、內部緩啟動、Hiccup 模式過電流防護以及過熱自動關機。另外還提供開漏 PGOOD 指示器和 SYNC IN / SYNC OUT 模式功能。
使用指南: PDF | HTML
TI.com 無法提供
開發板

LM5149-Q1EVM-400 — 搭載主動式 EMI 濾波器的 72-V、低 IQ、同步降壓 DC/DC 控制器的 LM5149-Q1 評估模組

LM5149-Q1EVM-400 高密度評估模組 (EVM) 的設計目的在於展示 LM5149-Q1 高性能、車用同步降壓 DC/DC 降壓控制器。EVM 可在 15 V 至 72 V 的廣泛輸入電壓範圍內運作,可提供高於 1% 設定點準確度,及高達 8-A 輸出電流的固定 12-V 輸出。LM5149-Q1 提供先進的 EMI 性能、超低 IQ 保護功能,可在穩壓器故障狀況下提供防護,包括電壓過低鎖定、內部緩啟動、打嗝模式過電流保護,以及過熱自動關機。該設備還包括開漏 PGOOD 指示器和 SYNC IN 功能。

使用指南: PDF | HTML
TI.com 無法提供
計算工具

LM5148-LM25148DESIGN-CALC LM5148/-Q1 and LM25148/-Q1 controller quickstart design tool

Welcome to the quickstart design tool for the LM5148, LM5148-Q1, LM25148 and LM25148-Q1. This standalone tool facilitates and assists the power supply engineer with the design of a DC/DC buck regulator based on the above controller family. As such, the user can expeditiously arrive at an (...)
支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 控制器 (外部 FET)
LM5148 3.5-V 至 80-V、電流模式同步降壓轉換器 LM5148-Q1 具有超低 IQ 的車用 80V 同步降壓 DC/DC 控制器 LM25148 具有超低 IQ 的 42-V 同步降壓 DC/DC 控制器 LM25148-Q1 具有超低 IQ 的車用 42-V 同步降壓 DC/DC 控制器
硬體開發
開發板
LM5149-Q1EVM-400 搭載主動式 EMI 濾波器的 72-V、低 IQ、同步降壓 DC/DC 控制器的 LM5149-Q1 評估模組 LM25149-Q1EVM-2100 LM25149-Q1 5.5-V 至 36-V 低 IQ、同步降壓 DC/DC 控制器評估模組
PCB 佈局

LM25149-Q1EVM-2100 PCB Layout Files

SNVR501.ZIP (1990 KB)
參考設計

PMP31252 — 適合車用的 150W 雙相同步降壓轉換器參考設計

本設計展示可當成雙輸出轉換器使用的低 EMI、雙相位降壓轉換器。作為雙相轉換器,此電路可提供 22A 的連續輸出電流和 30A 峰值電流,並具備 12V 至 5V 配置。
Test report: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGY) 24 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片