首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 轉換器
最新

LM654A5-Q1

現行

Automotive, 36VIN, 15A synchronous step-down converter for high efficiency and low EMC

立即訂購
產品規格表

LM654A5-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Topology Buck Iout (max) (A) 15 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 32 Vout (min) (V) 1 Features Adjustable soft start, Adjustable switching frequency, Auto Mode, Automotive load dump, Enable, Fixed Output, Forced PWM, Frequency synchronization, Over Current Protection, Power good, Stackable, Thermal shutdown, UVLO adjustable EMI features Low parasitic Hotrod packaging, Spread Spectrum Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.0000021 Duty cycle (max) (%) 99 TI functional safety category Functional Safety-Capable
Rating Automotive Topology Buck Iout (max) (A) 15 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 32 Vout (min) (V) 1 Features Adjustable soft start, Adjustable switching frequency, Auto Mode, Automotive load dump, Enable, Fixed Output, Forced PWM, Frequency synchronization, Over Current Protection, Power good, Stackable, Thermal shutdown, UVLO adjustable EMI features Low parasitic Hotrod packaging, Spread Spectrum Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.0000021 Duty cycle (max) (%) 99 TI functional safety category Functional Safety-Capable
— (—) — See data sheet
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Built in clocking for stacking of converters
  • Internal or external compensation
  • Pin selectable output voltage 3.3V and 5V fixed or adjustable from 0.8V to 0.9 × VIN
  • Wide input voltage range: 3V to 36V
  • Mitigated interference and noise technology – architecture 1 (MINT 1)
    • Optimized for low EMI requirements
    • Facilitates CISPR 25 Class 5 compliance
    • Mode pin configurable +8.5% or +17% dual-random spread spectrum reducing peak emissions
    • Enhanced HotRod™ QFN package with symmetrical pinout
  • Switching frequency from 300kHz to 2.2MHz
    • Pin-configurable AUTO or FPWM operation
    • Can be synchronized to external clock
  • Low minimum on time: 32ns (typical)
    • Enables 36V to 3.3V conversion at 2.2MHz
  • High-efficiency and high power density
    • > 94% efficiency at 12VIN to 5VOUT, IOUT = 15A, 400kHz
    • 8µA PFM no-load input current with bias pin at VOUT
    • 4.5mm × 4.5mm eQFN-26 with wettable flanks
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Built in clocking for stacking of converters
  • Internal or external compensation
  • Pin selectable output voltage 3.3V and 5V fixed or adjustable from 0.8V to 0.9 × VIN
  • Wide input voltage range: 3V to 36V
  • Mitigated interference and noise technology – architecture 1 (MINT 1)
    • Optimized for low EMI requirements
    • Facilitates CISPR 25 Class 5 compliance
    • Mode pin configurable +8.5% or +17% dual-random spread spectrum reducing peak emissions
    • Enhanced HotRod™ QFN package with symmetrical pinout
  • Switching frequency from 300kHz to 2.2MHz
    • Pin-configurable AUTO or FPWM operation
    • Can be synchronized to external clock
  • Low minimum on time: 32ns (typical)
    • Enables 36V to 3.3V conversion at 2.2MHz
  • High-efficiency and high power density
    • > 94% efficiency at 12VIN to 5VOUT, IOUT = 15A, 400kHz
    • 8µA PFM no-load input current with bias pin at VOUT
    • 4.5mm × 4.5mm eQFN-26 with wettable flanks

The LM654xx-Q1 is a buck converter family designed for high efficiency, high-power density, and low EMI performance with mitigated interference and noise technology (MINT 1) switcher technology for automotive applications. The converter operates over a wide input voltage range of 3V to 36V with pin selectable fixed output voltages of 3.3V and 5V or an adjustable output.

The low EMI operation is enabled with minimized loop inductance, optimized SW node slew-rate, and pin-selectable +8.5% or +17% dual-random spread spectrum (DRSS). The DRSS significantly reduces peak emissions through a combination of triangular and pseudo-random modulation while keeping output voltage ripple very low.

The current-mode control architecture with 32ns typical minimum on-time allows high conversion ratios at high frequencies, fast transient response, and excellent load and line regulation.

The LM654xx-Q1 is a buck converter family designed for high efficiency, high-power density, and low EMI performance with mitigated interference and noise technology (MINT 1) switcher technology for automotive applications. The converter operates over a wide input voltage range of 3V to 36V with pin selectable fixed output voltages of 3.3V and 5V or an adjustable output.

The low EMI operation is enabled with minimized loop inductance, optimized SW node slew-rate, and pin-selectable +8.5% or +17% dual-random spread spectrum (DRSS). The DRSS significantly reduces peak emissions through a combination of triangular and pseudo-random modulation while keeping output voltage ripple very low.

The current-mode control architecture with 32ns typical minimum on-time allows high conversion ratios at high frequencies, fast transient response, and excellent load and line regulation.
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LM654xx-Q1 Pin-Compatible 20A (25A Peak), 15A, 12A, 10A, Stackable Automotive Buck Converters With Mitigated Interference and Noise Technology (MINT) datasheet (Rev. B) PDF | HTML 2026/7/31
功能安全資訊 LM6x4xx Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2026/6/30

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

設計工具

LM654XXDESIGN-CALC — LM654XX-Q1 QuickStart design tool

QuickStart design calculator for the LM654XX-Q1
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
— (—) —
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片