產品詳細資料

Number of channels 4 Output type RSPECL Propagation delay time (µs) 0.0007 Vs (max) (V) 12 Vs (min) (V) 5 Vos (offset voltage at 25°C) (max) (mV) 9.5 Iq per channel (typ) (mA) 4.3 Input bias current (±) (max) (nA) 5000 Rail-to-rail No Rating Catalog Operating temperature range (°C) -40 to 85 VICR (max) (V) 10 VICR (min) (V) 0
Number of channels 4 Output type RSPECL Propagation delay time (µs) 0.0007 Vs (max) (V) 12 Vs (min) (V) 5 Vos (offset voltage at 25°C) (max) (mV) 9.5 Iq per channel (typ) (mA) 4.3 Input bias current (±) (max) (nA) 5000 Rail-to-rail No Rating Catalog Operating temperature range (°C) -40 to 85 VICR (max) (V) 10 VICR (min) (V) 0
WQFN (RTV) 32 25 mm² 5 x 5
  • (VCCI = VCCO = +5V, VEE = 0V.)
  • Propagation Delay 700 ps
  • Overdrive Dispersion 20 ps
  • Fast Rise and Fall Times 150 ps
  • Supply Range 5V to 12V
  • Input Common Mode Range Extends 200 mV Below Negative Rail
  • RSPECL outputs

All trademarks are the property of their respective owners.

  • (VCCI = VCCO = +5V, VEE = 0V.)
  • Propagation Delay 700 ps
  • Overdrive Dispersion 20 ps
  • Fast Rise and Fall Times 150 ps
  • Supply Range 5V to 12V
  • Input Common Mode Range Extends 200 mV Below Negative Rail
  • RSPECL outputs

All trademarks are the property of their respective owners.

The LMH7324 is a quad comparator with 700 ps propagation delay and low dispersion of 20 ps for a supply voltage of 5V. The input voltage range extends 200 mV below the negative supply. This enables the LMH7324 to ground sense even when operating on a single power supply. The device operates from a wide supply voltage range from 5V to 12V, which allows for a wide input voltage range. However, if a wide input voltage range is not required, operating from a single-ended 5V supply results in a significant power savings, and less heat dissipation.

The outputs of the LMH7324 are RSPECL compatible and can also be configured to create LVDS levels. The LMH7324 operates over the industrial temperature range of −40°C to 125°C. The LMH7324 is available in a 32-Pin WQFN package.

The LMH7324 is a quad comparator with 700 ps propagation delay and low dispersion of 20 ps for a supply voltage of 5V. The input voltage range extends 200 mV below the negative supply. This enables the LMH7324 to ground sense even when operating on a single power supply. The device operates from a wide supply voltage range from 5V to 12V, which allows for a wide input voltage range. However, if a wide input voltage range is not required, operating from a single-ended 5V supply results in a significant power savings, and less heat dissipation.

The outputs of the LMH7324 are RSPECL compatible and can also be configured to create LVDS levels. The LMH7324 operates over the industrial temperature range of −40°C to 125°C. The LMH7324 is available in a 32-Pin WQFN package.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 6
類型 標題 日期
* Data sheet LMH7324 Quad 700 ps High Speed Comparator with RSPECL Outputs datasheet (Rev. G) 2013年 3月 18日
Application note High Speed Comparators for Triggering in Oscilloscopes 2018年 2月 19日
E-book The Signal e-book: A compendium of blog posts on op amp design topics 2017年 3月 28日
EVM User's guide AN-1683 LMH7324 High Speed Comparator Evaluation Board (Rev. A) 2013年 5月 1日
Application note Interface Circuits for TIA/EIA-644 (LVDS) (Rev. B) 2002年 9月 16日
Application note Interfacing Different Logic with LVDS Receivers 2001年 5月 14日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LMH7324EVAL — 具有 RSPECL 輸出的 LMH7324 四路 700ps 高速比較器評估板

This board is designed to demonstrate the LMH7324 quad comparator with RSPECL outputs. It will facilitate the evaluation of the LMH7324 configured as a window detector. The board detects the level of the incoming signal and presents the outcome in a 3-bit presentation. One bit indicates that the (...)

使用指南: PDF
TI.com 無法提供
模擬型號

LMH7322 PSpice Model (Rev. A)

SNOM331A.TSM (12 KB) - PSpice Model
模擬型號

LMH7324 IBIS Model

SNOM558.ZIP (7 KB) - IBIS Model
模擬型號

LMH7324 PSpice Model (Rev. A)

SNOM332A.TSM (9 KB) - PSpice Model
模擬型號

LMH7324 TINA-TI Reference Design (Rev. A)

SNOM329A.TSC (106 KB) - TINA-TI Reference Design
模擬型號

LMH7324 TINA-TI Spice Model (Rev. A)

SNOM330A.ZIP (19 KB) - TINA-TI Spice Model
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RTV) 32 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片