首頁 電源管理 DC/DC 電源模組 電源模組 (整合式電感器)
首頁
電源管理
DC/DC 電源模組
電源模組 (整合式電感器)

LMZ12002EXT

現行

具 20V 最大輸入電壓的 2A SIMPLE SWITCHER 電源模組，適用軍事和堅固耐用的應用

立即訂購
產品規格表

LMZ12002EXT

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Topology Buck, Synchronous Buck Iout (max) (A) 2 Vin (max) (V) 20 Vin (min) (V) 4.5 Vout (max) (V) 6 Vout (min) (V) 0.8 Features EMI Tested, Enable, Tracking Operating temperature range (°C) -55 to 125 Type Module Duty cycle (max) (%) 85 Control mode Constant on-time (COT) Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 1000
Rating Catalog Topology Buck, Synchronous Buck Iout (max) (A) 2 Vin (max) (V) 20 Vin (min) (V) 4.5 Vout (max) (V) 6 Vout (min) (V) 0.8 Features EMI Tested, Enable, Tracking Operating temperature range (°C) -55 to 125 Type Module Duty cycle (max) (%) 85 Control mode Constant on-time (COT) Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 1000
TO-PMOD (NDW) 7 139.9032 mm² (10.16 mm × 13.77 mm)
  • Junction Temperature Range –55°C to 125°C
  • Integrated Shielded Inductor
  • Simple PCB Layout
  • Flexible Start-up Sequencing Using External Soft-
    Start Capacitor and Precision Enable
  • Protection Against Inrush Currents and Faults
    Such as Input UVLO and Output Short Circuit
  • Single Exposed Pad and Standard Pinout for Easy
    Mounting and Manufacturing
  • Fast Transient Response for FPGAs and ASICs
  • Low Output Voltage Ripple
  • Pin-to-Pin Compatible With Family Devices:
    • LMZ14203EXT/2EXT/1EXT (42-V Maximum 3
      A, 2 A, 1 A)
    • LMZ14203/2/1 (42-V Maximum 3 A, 2 A, 1 A)
    • LMZ12003/2/1 (20-V Maximum 3 A, 2 A, 1 A)
  • Fully WEBENCH® Power Designer enabled
  • Low Radiated Emissions and High Radiated
    Immunity
  • Passes Vibration Standard MIL-STD-883 Method
    2007.2 Condition A JESD22–B103B Condition 1
  • Passes Drop Standard MIL-STD-883 Method
    2002.3 Condition B JESD22–B110 Condition B
  • Electrical Specifications
    • 12-W Maximum Total Power Output
    • Up to 2-A Output Current
    • Input Voltage Range 4.5 V to 20 V
    • Output Voltage Range 0.8 V to 6 V
    • Efficiency up to 92%
  • Junction Temperature Range –55°C to 125°C
  • Integrated Shielded Inductor
  • Simple PCB Layout
  • Flexible Start-up Sequencing Using External Soft-
    Start Capacitor and Precision Enable
  • Protection Against Inrush Currents and Faults
    Such as Input UVLO and Output Short Circuit
  • Single Exposed Pad and Standard Pinout for Easy
    Mounting and Manufacturing
  • Fast Transient Response for FPGAs and ASICs
  • Low Output Voltage Ripple
  • Pin-to-Pin Compatible With Family Devices:
    • LMZ14203EXT/2EXT/1EXT (42-V Maximum 3
      A, 2 A, 1 A)
    • LMZ14203/2/1 (42-V Maximum 3 A, 2 A, 1 A)
    • LMZ12003/2/1 (20-V Maximum 3 A, 2 A, 1 A)
  • Fully WEBENCH® Power Designer enabled
  • Low Radiated Emissions and High Radiated
    Immunity
  • Passes Vibration Standard MIL-STD-883 Method
    2007.2 Condition A JESD22–B103B Condition 1
  • Passes Drop Standard MIL-STD-883 Method
    2002.3 Condition B JESD22–B110 Condition B
  • Electrical Specifications
    • 12-W Maximum Total Power Output
    • Up to 2-A Output Current
    • Input Voltage Range 4.5 V to 20 V
    • Output Voltage Range 0.8 V to 6 V
    • Efficiency up to 92%

The LMZ12002EXT SIMPLE SWITCHER® power module is an easy-to-use step-down DC-DC solution capable of driving up to 2-A load with exceptional power conversion efficiency, line and load regulation, and output accuracy. The LMZ12002EXT is available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ12002EXT can accept an input voltage rail between 4.5 V and 20 V, and can deliver an adjustable and highly accurate output voltage as low as 0.8 V. The LMZ12002EXT only requires three external resistors and four external capacitors to complete the power solution. The LMZ12002EXT is a reliable and robust design with the following protection features: thermal shutdown, input undervoltage lockout, output overvoltage protection, short-circuit protection, output current limit, and the device allows start-up into a prebiased output. A single resistor adjusts the switching frequency up to 1 MHz.

The LMZ12002EXT SIMPLE SWITCHER® power module is an easy-to-use step-down DC-DC solution capable of driving up to 2-A load with exceptional power conversion efficiency, line and load regulation, and output accuracy. The LMZ12002EXT is available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ12002EXT can accept an input voltage rail between 4.5 V and 20 V, and can deliver an adjustable and highly accurate output voltage as low as 0.8 V. The LMZ12002EXT only requires three external resistors and four external capacitors to complete the power solution. The LMZ12002EXT is a reliable and robust design with the following protection features: thermal shutdown, input undervoltage lockout, output overvoltage protection, short-circuit protection, output current limit, and the device allows start-up into a prebiased output. A single resistor adjusts the switching frequency up to 1 MHz.
filter 尋找其它 電源模組 (整合式電感器)
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 11
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LMZ12002EXT 2-A SIMPLE SWITCHER® Power Module With 20-V Maximum Input Voltage for Demanding Environments and Rugged Applications datasheet (Rev. G) PDF | HTML 2015/8/31
應用說明 Design Summary LMZ1xxx and LMZ2xxx Power Module Family (Rev. B) 2016/1/20
應用說明 AN-2027 Inverting Application for the LMZ14203 SIMPLE SWITCHER Power Module (Rev. A) 2013/5/6
應用說明 AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013/4/23
應用說明 AN-2078 PCB Layout for Texas Instruments SIMPLE SWITCHER Power Modules (Rev. A) 2013/4/23
應用說明 AN-2052 Texas Instruments SIMPLE SWITCHER Power Modules and EMI (Rev. C) 2013/4/23
應用說明 AN-2026 Effect of PCB Design on Thermal Performance of SIMPLE SWITCHER Modules (Rev. A) 2013/4/23
設計指南 SIMPLE SWITCHER® Design Guide 2011/4/11
應用說明 Understanding and Applying Current-Mode Control Theory 2007/8/19
更多文件說明 SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005/7/12
應用說明 AN-643 EMI/RFI Board Design (Rev. B) 2004/5/3

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

LMZ12002EXT PSpice Transient Model

SNVM132.ZIP (232 KB) - PSpice 模型
支援產品和硬體
模擬型號

LMZ12002EXT Unencrypted PSpice Transient Model

SNVM751.ZIP (3 KB) - PSpice 模型
支援產品和硬體
計算工具

LMZ1X-LMZXEXTDESIGN-CALC — LMZ1x/EXT 熱電阻估計

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TO-PMOD (NDW) 7 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片