產品詳細資料

Rating Catalog Architecture Integrated FET Control topology Field-oriented control (FOC), Sensorless Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Features 5-point configurable speed profile support, Anti-voltage surge protections prevents overvoltage, Code-free Field Oriented Control (FOC), Configurable motor startup and stop options, Improved acoustic performance with automatic dead time compensation, Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
Rating Catalog Architecture Integrated FET Control topology Field-oriented control (FOC), Sensorless Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Features 5-point configurable speed profile support, Anti-voltage surge protections prevents overvoltage, Code-free Field Oriented Control (FOC), Configurable motor startup and stop options, Improved acoustic performance with automatic dead time compensation, Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
VQFN (RGF) 40 35 mm² 7 x 5
  • Three-phase BLDC motor driver with integrated sensorless motor control algorithm
    • Code-free Field Oriented Control (FOC)
    • Analog, PWM and freq. based speed input modes: available only when MCF8315A is configured as a standby device (DEV_MODE = 0b)
    • I 2C based speed input mode: available in both sleep (DEV_MODE = 1b) and standby devices (DEV_MODE = 0b).
    • Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET)
    • 5-point configurable speed profile support
    • Windmilling support through forward resynchronization and reverse drive
    • Anti-voltage surge (AVS) protection
    • Improved acoustic performance with automatic dead time compensation
  • 4.5- to 35-V operating voltage (40-V abs max)
  • High output current capability: 4-A peak
  • Low MOSFET on-state resistance
    • R DS(ON) (HS + LS) at T A = 25°C : 240-mΩ (typ.)
  • Low power sleep mode : Refer
    • 5-µA (maximum) at V VM = 24-V, T A = 25°C
  • Speed loop accuracy: 3% with internal clock and 1% with external clock reference
  • Supports up to 75-kHz PWM frequency for low inductance motor support
  • Does not require external current sense resistors; uses built-in current sensing
  • Built-in 3.3-V, 20-mA LDO regulator
  • Built-in 3.3-V/5-V, 170-mA buck regulator
  • Dedicated DRVOFF pin to disable (Hi-Z) outputs
  • Spread spectrum and slew rate for EMI mitigation
  • Suite of integrated protection features
    • Supply under voltage lockout (UVLO)
    • Supply over voltage protection (OVP)
    • Motor lock detection (5 different types)
    • Over current protection (OCP)
    • Thermal warning and shutdown (OTW/TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I 2C interface
  • Three-phase BLDC motor driver with integrated sensorless motor control algorithm
    • Code-free Field Oriented Control (FOC)
    • Analog, PWM and freq. based speed input modes: available only when MCF8315A is configured as a standby device (DEV_MODE = 0b)
    • I 2C based speed input mode: available in both sleep (DEV_MODE = 1b) and standby devices (DEV_MODE = 0b).
    • Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET)
    • 5-point configurable speed profile support
    • Windmilling support through forward resynchronization and reverse drive
    • Anti-voltage surge (AVS) protection
    • Improved acoustic performance with automatic dead time compensation
  • 4.5- to 35-V operating voltage (40-V abs max)
  • High output current capability: 4-A peak
  • Low MOSFET on-state resistance
    • R DS(ON) (HS + LS) at T A = 25°C : 240-mΩ (typ.)
  • Low power sleep mode : Refer
    • 5-µA (maximum) at V VM = 24-V, T A = 25°C
  • Speed loop accuracy: 3% with internal clock and 1% with external clock reference
  • Supports up to 75-kHz PWM frequency for low inductance motor support
  • Does not require external current sense resistors; uses built-in current sensing
  • Built-in 3.3-V, 20-mA LDO regulator
  • Built-in 3.3-V/5-V, 170-mA buck regulator
  • Dedicated DRVOFF pin to disable (Hi-Z) outputs
  • Spread spectrum and slew rate for EMI mitigation
  • Suite of integrated protection features
    • Supply under voltage lockout (UVLO)
    • Supply over voltage protection (OVP)
    • Motor lock detection (5 different types)
    • Over current protection (OCP)
    • Thermal warning and shutdown (OTW/TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I 2C interface

The MCF8315A provides a single-chip, code-free sensorless FOC solution for customers driving speed-controlled 12- to 24-V brushless-DC motors (BLDC) or Permanent Magnet Synchronous motor (PMSM) up to 4-A peak current. The MCF8315A integrates three ½-bridges with 40-V absolute maximum capability and a low R DS(ON) of 240 mΩ (high-side + low-side FETs). MCF8315A integrates power management circuits including an voltage-adjustable buck regulator (3.3 V / 5 V, 170-mA) and LDO (3.3 V / 20 mA) that can be used to power external circuits.

The FOC algorithm configuration can be stored in non-volatile EEPROM, which allows the device to operate stand-alone once it has been configured. The device receives a speed command through a PWM input, analog voltage, variable frequency square wave or I 2C command. There are a large number of protection features integrated into the MCF8315A, intended to protect the device, motor, and system against fault events.

Documentation for reference:

The MCF8315A provides a single-chip, code-free sensorless FOC solution for customers driving speed-controlled 12- to 24-V brushless-DC motors (BLDC) or Permanent Magnet Synchronous motor (PMSM) up to 4-A peak current. The MCF8315A integrates three ½-bridges with 40-V absolute maximum capability and a low R DS(ON) of 240 mΩ (high-side + low-side FETs). MCF8315A integrates power management circuits including an voltage-adjustable buck regulator (3.3 V / 5 V, 170-mA) and LDO (3.3 V / 20 mA) that can be used to power external circuits.

The FOC algorithm configuration can be stored in non-volatile EEPROM, which allows the device to operate stand-alone once it has been configured. The device receives a speed command through a PWM input, analog voltage, variable frequency square wave or I 2C command. There are a large number of protection features integrated into the MCF8315A, intended to protect the device, motor, and system against fault events.

Documentation for reference:

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
MCF8316A 現行 40-V 最大值、8-A 峰值無感測器 FOC 控制 3 相 BLDC 馬達驅動器 Lower RDS(ON) targeting higher power applications
功能相同,但引腳輸出與所比較的裝置不同
MCF8329A 現行 60V 無感測器磁場定向控制 (FOC) 三相 BLDC 閘極驅動器 External FETs for higher power

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 9
類型 標題 日期
* Data sheet MCF8315ASensorless Field Oriented Control (FOC)Integrated FET BLDC Driver datasheet (Rev. A) PDF | HTML 2023年 4月 14日
Certificate MCF8315PWPEVM EU Declaration of Conformity (DoC) 2024年 6月 20日
Technical article Selecting the right level of integration to meet motor design requirements PDF | HTML 2024年 1月 4日
Technical article Top 3 ways to reduce audible noise in motion control applications PDF | HTML 2023年 12月 21日
Application note How to Use the MCF831x to Solve Thermal and Quick Startup Challenges (Rev. A) PDF | HTML 2023年 10月 20日
Application note Selection Guide for MCF831x Devices PDF | HTML 2023年 4月 26日
User guide MCF8315A Tuning Guide PDF | HTML 2023年 1月 3日
Certificate MCF8315EVM EU RoHS Declaration of Conformity (DoC) 2022年 12月 21日
Technical article How to achieve efficient, reliable and accurate actuation in real-time motor contr PDF | HTML 2022年 10月 25日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

MCF8315EVM — 適用三相無感測器 FOC 整合式 MOSFET BLDC 馬達驅動器的 MCF8315 評估模組

MCF8315 有三個半全橋整合式 MOSFET 驅動器,適用 4.5-V 至 35-V、5-A 尖峰電流驅動之三相無刷 DC (BLDC) 馬達的無感測器 FOC 控制。MCx8315 整合降壓穩壓器,透過可程式編輯的穩壓電源支援 200-mA。

EVM 包括板載 MSP430、MSP430FR2355,可用做與 MCF8315EVM GUI 的介面。

使用指南: PDF | HTML
TI.com 無法提供
開發模組 (EVM) 的 GUI

MOTORSTUDIO Motor Studio GUI for tuning and evaluating BLDC motor drivers

Motor Studio is an easy-to-use graphical user interface (GUI) that simplifies the tuning process of our brushless DC (BLDC) motor drivers to reduce device evaluation and product development time. The GUI allows users to quickly spin up their motors and optimize various stages of motor operation to (...)

支援產品和硬體

支援產品和硬體

產品
整合式控制 BLDC 驅動器
MCF8316A 40-V 最大值、8-A 峰值無感測器 FOC 控制 3 相 BLDC 馬達驅動器 MCF8315A 40-V 最大值、4-A 峰值無感測器 FOC 控制三相 BLDC 馬達驅動器 MCF8329A 60V 無感測器磁場定向控制 (FOC) 三相 BLDC 閘極驅動器 MCF8316C-Q1 車用、40-V 最大值、8-A 峰值、無感測器磁場定向控制 (FOC) 3 相 BLDC 馬達驅動器 MCF8315C 最大 40V、4A 峰值、無感測器磁場定向控制 (FOC) 三相 BLDC 馬達驅動器 MCF8315C-Q1 車用、最大 40V、4A 峰值、無感測器磁場定向控制 (FOC) 三相 BLDC 馬達驅動器
硬體開發
開發板
MCF8316AEVM MCF8316A 三相無感測器 FOC BLDC 馬達驅動器評估模組 MCF8315EVM 適用三相無感測器 FOC 整合式 MOSFET BLDC 馬達驅動器的 MCF8315 評估模組 MCF8329EVM 適用於 60V 無感測器 FOC 三相 BLDC 閘極驅動器的 MCF8329 評估模組 MCF8315PWPEVM 適用於 24 針腳 HTSSOP 的 MCF8315C 評估模組
下載選項
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGF) 40 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片