OPA1612
- Superior Sound Quality
- Ultralow Noise: 1.1 nV/√Hz at 1 kHz
- Ultralow Distortion:
0.000015% at 1 kHz - High Slew Rate: 27 V/μs
- Wide Bandwidth: 40 MHz (G = +1)
- High Open-Loop Gain: 130 dB
- Unity Gain Stable
- Low Quiescent Current:
3.6 mA per Channel - Rail-to-Rail Output
- Wide Supply Range: ±2.25 V to ±18 V
- Single and Dual Versions Available
The OPA1611 (single) and OPA1612 (dual) bipolar-input operational amplifiers achieve very low 1.1-nV/√Hz noise density with an ultralow distortion of 0.000015% at 1 kHz. The OPA1611 and OPA1612 offer rail-to-rail output swing to within 600 mV with a 2-kΩ load, which increases headroom and maximizes dynamic range. These devices also have a high output drive capability of ±30 mA.
These devices operate over a very wide supply range of ±2.25 V to ±18 V, on only 3.6 mA of supply current per channel. The OPA1611 and OPA1612 op amps are unity-gain stable and provide excellent dynamic behavior over a wide range of load conditions.
The dual version features completely independent circuitry for lowest crosstalk and freedom from interactions between channels, even when overdriven or overloaded.
Both the OPA1611 and OPA1612 are available in SOIC-8 packages and the OPA1612 is available in SON-8. These devices are specified from –40°C to +85°C.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
AMP-PDK-EVM — 放大器性能開發套件評估模組
放大器性能開發套件 (PDK) 是一款評估模組 (EVM) 套件,可測試通用運算放大器 (op amp) 參數,並與大多數運算放大器和比較器相容。EVM 套件提供主板和多個插槽式子卡選項,可滿足封裝需求,使工程師能夠快速評估和驗證裝置性能。
AMP-PDK-EVM 套件支援五種最熱門的業界標準封裝,包括:
- D (SOIC-8 和 SOIC-14)
- PW (TSSOP-14)
- DGK (VSSOP-8)
- DBV (SOT23-5 和 SOT23-6)
- DCK (SC70-5 和 SC70-6)
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面,列出各種常見計算,從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。
除了作為獨立工具使用外,此計算機還與類比工程師口袋參考中描述的概念相得益彰。
CIRCUIT060050 — 帶通濾波反向衰減器電路
SBOC503 — Simulation for Band Pass Filtered Inverting Attenuator Circuit
PMP9781 — 適用於可攜式音訊應用的小型、高效率分裂軌電源供應參考設計
差動耳機放大器需要正負電壓。在此參考設計中,兩種電壓皆由具有所有整合式分裂軌轉換器的單一輸入電壓產生。只需要一個電感器和最低數量的外部元件即可實現高效率電源供應,進而將系統的失真維持在極低的程度。終端使用者可在行動應用中享受高保真音訊性能,以及更長的播放時間。
TIPD177 — 適用於電流輸出音訊 DAC 的高保真耳機放大器參考設計
此 TI 精準驗證設計電路可將音訊 DAC 的差動電流輸出轉換為能夠驅動低阻抗耳機的單端電壓。此設計能夠滿足目前在手機與可攜式音訊播放器中普及的高傳真性能水準。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| WSON (DRG) | 8 | Ultra Librarian |