首頁 放大器 運算放大器 (op amps) 高速運算放大器 (GBW ≥ 50 MHz)
首頁
放大器
運算放大器 (op amps)
高速運算放大器 (GBW ≥ 50 MHz)

OPA2694

現行

雙路、寬頻、低功耗電流回饋運算放大器

立即訂購
產品規格表

OPA2694

現行
產品規格表 立即訂購

產品詳細資料

Architecture Current FB Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12.6 GBW (typ) (MHz) 1500 BW at Acl (MHz) 1500 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 1700 Vn at flatband (typ) (nV√Hz) 2.1 Vn at 1 kHz (typ) (nV√Hz) 2.1 Iq per channel (typ) (mA) 5.8 Vos (offset voltage at 25°C) (max) (mV) 3.2 Rail-to-rail No Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 60 Input bias current (max) (pA) 22000000 Offset drift (typ) (µV/°C) 15 Iout (typ) (mA) 70 2nd harmonic (dBc) 85 3rd harmonic (dBc) 72 Frequency of harmonic distortion measurement (MHz) 5
Architecture Current FB Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12.6 GBW (typ) (MHz) 1500 BW at Acl (MHz) 1500 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 1700 Vn at flatband (typ) (nV√Hz) 2.1 Vn at 1 kHz (typ) (nV√Hz) 2.1 Iq per channel (typ) (mA) 5.8 Vos (offset voltage at 25°C) (max) (mV) 3.2 Rail-to-rail No Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 60 Input bias current (max) (pA) 22000000 Offset drift (typ) (µV/°C) 15 Iout (typ) (mA) 70 2nd harmonic (dBc) 85 3rd harmonic (dBc) 72 Frequency of harmonic distortion measurement (MHz) 5
SOIC (D) 8 29.4 mm² 4.9 x 6
  • UNITY GAIN STABLE BANDWIDTH: 1500MHz
  • HIGH GAIN OF 2V/V BANDWIDTH: 690MHz
  • LOW SUPPLY CURRENT: 5.8mA/ch
  • HIGH SLEW RATE: 1700V/µs
  • HIGH FULL-POWER BANDWIDTH: 670MHz
  • LOW DIFFERENTIAL GAIN/PHASE:
       0.03%/0.015°
  • APPLICATIONS
    • MEDICAL IMAGING
    • WIDEBAND VIDEO LINE DRIVER
    • DIFFERENTIAL RECEIVER
    • ADC DRIVER
    • HIGH-SPEED SIGNAL PROCESSING
    • PULSE AMPLIFIER
    • IMPROVED REPLACEMENT FOR OPA2658

All trademarks are the property of their respective owners.
  • UNITY GAIN STABLE BANDWIDTH: 1500MHz
  • HIGH GAIN OF 2V/V BANDWIDTH: 690MHz
  • LOW SUPPLY CURRENT: 5.8mA/ch
  • HIGH SLEW RATE: 1700V/µs
  • HIGH FULL-POWER BANDWIDTH: 670MHz
  • LOW DIFFERENTIAL GAIN/PHASE:
       0.03%/0.015°
  • APPLICATIONS
    • MEDICAL IMAGING
    • WIDEBAND VIDEO LINE DRIVER
    • DIFFERENTIAL RECEIVER
    • ADC DRIVER
    • HIGH-SPEED SIGNAL PROCESSING
    • PULSE AMPLIFIER
    • IMPROVED REPLACEMENT FOR OPA2658

All trademarks are the property of their respective owners.

The OPA2694 is a dual, ultra-wideband, low-power, current feedback operational amplifier featuring high slew rate and low differential gain/phase errors. An improved output stage provides ±70mA output drive with < 1.5V output voltage headroom. Low supply current with > 500MHz bandwidth meets the requirements of high density video routers. Being a current feedback design, the OPA2694 holds its bandwidth to very high gains—at a gain of 10, the OPA2694 will still provide > 200MHz bandwidth.

RF applications can use the OPA2694 as a low-power SAW pre-amplifier. Extremely high 3rd-order intercept is provided through 70MHz at much lower quiescent power than many typical RF amplifiers.

The OPA2694 is available in an industry-standard pinout in an SO-8 package.

The OPA2694 is a dual, ultra-wideband, low-power, current feedback operational amplifier featuring high slew rate and low differential gain/phase errors. An improved output stage provides ±70mA output drive with < 1.5V output voltage headroom. Low supply current with > 500MHz bandwidth meets the requirements of high density video routers. Being a current feedback design, the OPA2694 holds its bandwidth to very high gains—at a gain of 10, the OPA2694 will still provide > 200MHz bandwidth.

RF applications can use the OPA2694 as a low-power SAW pre-amplifier. Extremely high 3rd-order intercept is provided through 70MHz at much lower quiescent power than many typical RF amplifiers.

The OPA2694 is available in an industry-standard pinout in an SO-8 package.
filter 尋找其它 高速運算放大器 (GBW ≥ 50 MHz)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
OPA695 現行 具停用功能的超寬頻電流回饋運算放大器 Single channel, lower noise (1.8 nV/rtHz), wider BW ( 1.7 GHz), higher slew rate (4,300 V/us), and higher output current (120 mA)

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 14
重要文件 類型 標題 格式選項 日期
* Data sheet Dual, Wideband, Low-Power, Current-Feedback Operational Amplifier datasheet (Rev. D) 2013年 4月 10日
Technical article 3 common questions when designing with high-speed amplifiers PDF | HTML 2020年 7月 17日
E-book The Signal e-book: A compendium of blog posts on op amp design topics 2017年 3月 28日
Application note RLC Filter Design for ADC Interface Applications (Rev. A) 2015年 5月 13日
User guide DEM-OPA-SO-2B User's Guide (Rev. A) 2006年 5月 25日
User guide DEM-OPA-SO-2C User's Guide (Rev. A) 2006年 5月 25日
Analog Design Journal Low-power, high-intercept interface to the ADS5424, 105-MSPS converter 2005年 10月 10日
Analog Design Journal Expanding the usability of current-feedback amplifiers 2005年 2月 28日
Analog Design Journal Active filters using current-feedback amplifiers 2005年 2月 25日
Application note Noise Analysis for High Speed Op Amps (Rev. A) 2005年 1月 17日
Application note Stabilizing Current-Feedback Op Amps While Optimizing Circuit Performance 2004年 4月 28日
Application note ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers 2004年 4月 22日
Application note Measuring Board Parasitics in High-Speed Analog Design 2003年 7月 7日
Application note Current Feedback Amplifiers: Review, Stability Analysis, and Applications 2000年 11月 20日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DEM-OPA-SO-2B — 適用於 SO-8 (非反相) 封裝的雙路運算放大器評估模組

使用指南: PDF
TI.com 無法提供
模擬型號

OPA694 PSpice Model (Rev. B)

SBOC068B.ZIP (22 KB) - PSpice Model
下載
模擬型號

OPAy694 Family TINA-TI Reference Design (Rev. A)

SBOM446A.TSC (2316 KB) - TINA-TI Reference Design
下載
模擬型號

OPAy694 Family TINA-TI Spice Model (Rev. A)

SBOM445A.ZIP (5 KB) - TINA-TI Spice Model
下載
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支援產品和硬體

支援產品和硬體
啟動 下載
計算工具

VOLT-DIVIDER-CALC — Voltage divider calculation tool

The voltage divider calculation tool (VOLT-DIVIDER-CALC) quickly determines a set of resistors for a voltage divider. This KnowledgeBase JavaScript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. VOLT-DIVIDER-CALC can also be used to (...)
立即進行設計
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片