首頁 放大器 運算放大器 (op amps) 精密運算放大器 (Vos < 1mV)
首頁
放大器
運算放大器 (op amps)
精密運算放大器 (Vos < 1mV)

OPA377

現行

低成本、低雜訊、5.5-MHz CMOS 運算放大器

立即訂購
產品規格表

OPA377

現行
立即訂購

產品詳細資料

Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.5 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.2 Vos (offset voltage at 25°C) (max) (mV) 1 Offset drift (typ) (µV/°C) 0.32 Input bias current (max) (pA) 10 GBW (typ) (MHz) 5.5 Features EMI Hardened, Small Size Slew rate (typ) (V/µs) 2 Rail-to-rail In, Out Iq per channel (typ) (mA) 0.76 Vn at 1 kHz (typ) (nV√Hz) 7.5 CMRR (typ) (dB) 90 Rating Catalog Operating temperature range (°C) -40 to 125 Iout (typ) (A) 0.03 Architecture CMOS Input common mode headroom (to negative supply) (typ) (V) -0.1 Input common mode headroom (to positive supply) (typ) (V) 0.1 Output swing headroom (to negative supply) (typ) (V) 0.01 Output swing headroom (to positive supply) (typ) (V) -0.01 THD + N at 1 kHz (typ) (%) 0.00027
Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.5 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.2 Vos (offset voltage at 25°C) (max) (mV) 1 Offset drift (typ) (µV/°C) 0.32 Input bias current (max) (pA) 10 GBW (typ) (MHz) 5.5 Features EMI Hardened, Small Size Slew rate (typ) (V/µs) 2 Rail-to-rail In, Out Iq per channel (typ) (mA) 0.76 Vn at 1 kHz (typ) (nV√Hz) 7.5 CMRR (typ) (dB) 90 Rating Catalog Operating temperature range (°C) -40 to 125 Iout (typ) (A) 0.03 Architecture CMOS Input common mode headroom (to negative supply) (typ) (V) -0.1 Input common mode headroom (to positive supply) (typ) (V) 0.1 Output swing headroom (to negative supply) (typ) (V) 0.01 Output swing headroom (to positive supply) (typ) (V) -0.01 THD + N at 1 kHz (typ) (%) 0.00027
SOT-23 (DBV) 5 8.12 mm² (2.9 mm × 2.8 mm) SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm) SOT-SC70 (DCK) 5 4.2 mm² (2 mm × 2.1 mm)
  • GAIN BANDWIDTH PRODUCT: 5.5MHz
  • LOW NOISE: 7.5nV/√Hz at 1kHz
  • OFFSET VOLTAGE: 1mV (max)
  • INPUT BIAS CURRENT: 0.2pA
  • RAIL-TO-RAIL OUTPUT
  • UNITY-GAIN STABLE
  • EMI INPUT FILTERING
  • QUIESCENT CURRENT: 0.76mA/ch
  • SUPPLY VOLTAGE: 2.2V to 5.5V
  • SMALL PACKAGES:
    SC70, SOT23, and MSOP
  • APPLICATIONS
    • PHOTODIODE PREAMP
    • PIEZOELECTRIC SENSOR PREAMP
    • SENSOR SIGNAL CONDITIONING
    • AUDIO EQUIPMENT
    • ACTIVE FILTERS

    All trademarks are the property of their respective owners.
    • GAIN BANDWIDTH PRODUCT: 5.5MHz
    • LOW NOISE: 7.5nV/√Hz at 1kHz
    • OFFSET VOLTAGE: 1mV (max)
    • INPUT BIAS CURRENT: 0.2pA
    • RAIL-TO-RAIL OUTPUT
    • UNITY-GAIN STABLE
    • EMI INPUT FILTERING
    • QUIESCENT CURRENT: 0.76mA/ch
    • SUPPLY VOLTAGE: 2.2V to 5.5V
    • SMALL PACKAGES:
      SC70, SOT23, and MSOP
  • APPLICATIONS
    • PHOTODIODE PREAMP
    • PIEZOELECTRIC SENSOR PREAMP
    • SENSOR SIGNAL CONDITIONING
    • AUDIO EQUIPMENT
    • ACTIVE FILTERS

    All trademarks are the property of their respective owners.

    The OPA377 family of operational amplifiers are wide-bandwidth CMOS amplifiers that provide very low noise, low input bias current, and low offset voltage while operating on a low quiescent current of 0.76mA (typ).

    The OPA377 op amps are optimized for low-voltage, single-supply applications. The exceptional combination of ac and dc performance make them ideal for a wide range of applications, including small signal conditioning, audio, and active filters. In addition, these parts have a wide supply range with excellent PSRR, making them attractive for applications that run directly from batteries without regulation.

    The OPA377 is available in the SC70-5, SOT23-5, and SO-8 packages. The dual OPA2377 is offered in the SO-8 and MSOP-8, and the quad OPA4377 in the TSSOP-14 packages. All versions are specified for operation from –40°C to +125°C.

    The OPA377 family of operational amplifiers are wide-bandwidth CMOS amplifiers that provide very low noise, low input bias current, and low offset voltage while operating on a low quiescent current of 0.76mA (typ).

    The OPA377 op amps are optimized for low-voltage, single-supply applications. The exceptional combination of ac and dc performance make them ideal for a wide range of applications, including small signal conditioning, audio, and active filters. In addition, these parts have a wide supply range with excellent PSRR, making them attractive for applications that run directly from batteries without regulation.

    The OPA377 is available in the SC70-5, SOT23-5, and SO-8 packages. The dual OPA2377 is offered in the SO-8 and MSOP-8, and the quad OPA4377 in the TSSOP-14 packages. All versions are specified for operation from –40°C to +125°C.
    filter 尋找其它 精密運算放大器 (Vos < 1mV)
    下載 觀看有字幕稿的影片 影片

    技術文件

    找不到結果。請清除您的搜尋條件，然後再試一次。
    檢視所有 5
    重要文件 類型 標題 格式選項 下載最新的英文版本 日期
    * 資料表 5MHz, Low-Noise, Single, Dual, Quad CMOS Operational Amplifiers datasheet (Rev. B) 2011/1/27
    應用說明 Ramping Up on Slew Rate (Rev. A) PDF | HTML 2024/9/25
    Circuit design Inverting attenuator circuit PDF | HTML 2018/3/23
    電子書 The Signal e-book: A compendium of blog posts on op amp design topics PDF | HTML 2017/3/28
    應用說明 Extending Op Amp Bandwidth using Active Feedback Phase Correction 2013/7/16

    設計與開發

    如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

    開發板

    AMP-PDK-EVM — 放大器性能開發套件評估模組

    放大器性能開發套件 (PDK) 是一款評估模組 (EVM) 套件，可測試通用運算放大器 (op amp) 參數，並與大多數運算放大器和比較器相容。EVM 套件提供主板和多個插槽式子卡選項，可滿足封裝需求，使工程師能夠快速評估和驗證裝置性能。

    AMP-PDK-EVM 套件支援五種最熱門的業界標準封裝，包括：

    • D (SOIC-8 和 SOIC-14)
    • PW (TSSOP-14)
    • DGK (VSSOP-8)
    • DBV (SOT23-5 和 SOT23-6)
    • DCK (SC70-5 和 SC70-6)
    使用指南: PDF | HTML
    支援產品和硬體
    模擬型號

    OPA377, OPA2377 and OPA4377 PSpice Model (Rev. A)

    SBOM674A.ZIP (31 KB) - PSpice 模型
    支援產品和硬體
    模擬型號

    OPA377, OPA2377 and OPA4377 TINA-TI Reference Design (Rev. A)

    SBOM676A (144 KB) - TINA-TI 參考設計
    支援產品和硬體
    模擬型號

    OPA377, OPA2377 and OPA4377 TINA-TI Spice Model (Rev. A)

    SBOM675A.ZIP (6 KB) - TINA-TI Spice 模型
    支援產品和硬體
    模擬型號

    OPA377-Q1, OPA2377-Q1 and OPA4377-Q1 TINA-TI Spice Model (Rev. B)

    SBOM400B.ZIP (6 KB) - TINA-TI Spice 模型
    支援產品和硬體
    計算工具

    ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

    類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。

    除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。

    支援產品和硬體
    計算工具

    OPAMP-NOISECALC — Noise Calculator

    This folder contains three tools to help in understandning and managing noise in cicuits. The included tools are:

    • A noise generator tool - This is a Lab View 4-Run Time executable that generates Gaussian white noise, uniform white noise, 1/f noise, short noise, and 60Hz line noise. Temporal data, (...)
    支援產品和硬體
    設計工具

    CIRCUIT060071 — 反相衰減器電路

    此電路可轉換輸入訊號、Vi 並套用 –40 dB 的訊號增益。反相放大器的共模電壓等於連接至非反相輸入的電壓，在此設計中即為接地。
    支援產品和硬體
    封裝 針腳 CAD 符號、佔位空間與 3D 模型
    SOT-23 (DBV) 5 Ultra Librarian
    SOIC (D) 8 Ultra Librarian
    SOT-SC70 (DCK) 5 Ultra Librarian
    適用 TI 的評估品項標準條款與條件。

    訂購與品質

    建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

    支援與培訓

    內含 TI 工程師技術支援的 TI E2E™ 論壇

    以英文檢視所有論壇主題

    內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

    若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

    影片