OPA4172-Q1

現行

車規、四路、36-V、10-MHz、低功耗運算放大器

立即訂購

產品規格表

document-pdfAcrobat OPAx172-Q1 36-V, Single-Supply, 10-MHz, Rail-to-Rail Output Automotive Grade Operational Amplifiers datasheet (Rev. A) (英文) PDF | HTML

現在提供此產品的更新版本

open-in-new

比較替代產品

具備升級功能，可直接投入使用替代所比較的裝置。

OPA4992-Q1

現行

車用四路、40-V、10.6-MHz 軌至軌輸入與輸出、低偏移電壓、低雜訊運算放大器 Rail-to-rail I/O, wider supply range (2.7 V to 40 V), higher GBW (10.6 MHz), faster slew rate (32 V/us)

OPA4172-Q1

現行

產品規格表

立即訂購

產品詳細資料

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

36

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

4.5

Rail-to-rail

In to V-, Out

GBW (typ) (MHz)

10

Slew rate (typ) (V/µs)

10

Vos (offset voltage at 25°C) (max) (mV)

1

Iq per channel (typ) (mA)

1.6

Vn at 1 kHz (typ) (nV√Hz)

7

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

0.3

Input bias current (max) (pA)

15

CMRR (typ) (dB)

120

Iout (typ) (A)

0.075

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

-2

Output swing headroom (to negative supply) (typ) (V)

0.01

Output swing headroom (to positive supply) (typ) (V)

-0.01

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

36

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

4.5

Rail-to-rail

In to V-, Out

GBW (typ) (MHz)

10

Slew rate (typ) (V/µs)

10

Vos (offset voltage at 25°C) (max) (mV)

1

Iq per channel (typ) (mA)

1.6

Vn at 1 kHz (typ) (nV√Hz)

7

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

0.3

Input bias current (max) (pA)

15

CMRR (typ) (dB)

120

Iout (typ) (A)

0.075

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

-2

Output swing headroom (to negative supply) (typ) (V)

0.01

Output swing headroom (to positive supply) (typ) (V)

-0.01

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1:
  –40°C to +125°C
  Ambient Operating Temperature Range
- Device HBM ESD Classification Level 3A
- Device CDM ESD Classification level C6
Wide Supply Range:
4.5 V to 36 V, ±2.25 V to ±18 V
Low Offset Voltage: ±0.2 mV
Low Offset Drift: ±0.3 µV/°C
Gain Bandwidth: 10 MHz
Low Input Bias Current: ±8 pA
Low Quiescent Current: 1.6 mA per Amplifier
Low Noise: 7 nV/√Hz
EMI and RFI Filtered Inputs
Input Range Includes the Negative Supply
Input Range Operates to Positive Supply
Rail-to-Rail Output
High Common-Mode Rejection: 120 dB
Industry-Standard Packages:
- VSSOP-8, TSSOP-14

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1:
  –40°C to +125°C
  Ambient Operating Temperature Range
- Device HBM ESD Classification Level 3A
- Device CDM ESD Classification level C6
Wide Supply Range:
4.5 V to 36 V, ±2.25 V to ±18 V
Low Offset Voltage: ±0.2 mV
Low Offset Drift: ±0.3 µV/°C
Gain Bandwidth: 10 MHz
Low Input Bias Current: ±8 pA
Low Quiescent Current: 1.6 mA per Amplifier
Low Noise: 7 nV/√Hz
EMI and RFI Filtered Inputs
Input Range Includes the Negative Supply
Input Range Operates to Positive Supply
Rail-to-Rail Output
High Common-Mode Rejection: 120 dB
Industry-Standard Packages:
- VSSOP-8, TSSOP-14

The OPA2172-Q1 and OPA4172-Q1 (OPAx172-Q1) are a family of 36-V, single-supply, low-noise operational amplifiers capable of operating on supplies ranging from 4.5 V (±2.25 V) to 36 V
(±18 V). The OPAx172-Q1 are available in micropackages, and offer low offset, drift, and quiescent current. These devices also offer wide bandwidth, fast slew rate, and high output current drive capability. The dual and quad versions all have identical specifications for maximum design flexibility.

Unlike most op amps that are specified at only one supply voltage, the OPAx172-Q1 family is specified from 4.5 V to 36 V. Input signals beyond the supply rails do not cause phase reversal. The input can operate 100 mV below the negative rail and within 2 V of the top rail during normal operation. Note that these devices can operate with full rail-to-rail input 100 mV beyond the top rail, but with reduced performance within 2 V of the top rail.

The OPAx172-Q1 series of op amps are specified from –40°C to +125°C.

The OPA2172-Q1 and OPA4172-Q1 (OPAx172-Q1) are a family of 36-V, single-supply, low-noise operational amplifiers capable of operating on supplies ranging from 4.5 V (±2.25 V) to 36 V
(±18 V). The OPAx172-Q1 are available in micropackages, and offer low offset, drift, and quiescent current. These devices also offer wide bandwidth, fast slew rate, and high output current drive capability. The dual and quad versions all have identical specifications for maximum design flexibility.

Unlike most op amps that are specified at only one supply voltage, the OPAx172-Q1 family is specified from 4.5 V to 36 V. Input signals beyond the supply rails do not cause phase reversal. The input can operate 100 mV below the negative rail and within 2 V of the top rail during normal operation. Note that these devices can operate with full rail-to-rail input 100 mV beyond the top rail, but with reduced performance within 2 V of the top rail.

The OPAx172-Q1 series of op amps are specified from –40°C to +125°C.

filter

尋找其它一般用途運算放大器

下載觀看有字幕稿的影片影片

您可能會感興趣的類似產品

open-in-new

比較替代產品

功能相同，但針腳輸出與所比較的裝置不同。

OPA4991-Q1

現行

車用、四通道、40-V、4.5-MHz、低功耗運算放大器 RRIO, lower GBW (4.5 MHz) but much higher slew rate (21 V/us)

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 2

重要文件	類型	標題	格式選項	下載最新的英文版本		日期
*	資料表	OPAx172-Q1 36-V, Single-Supply, 10-MHz, Rail-to-Rail Output Automotive Grade Operational Amplifiers datasheet (Rev. A)	PDF \| HTML			2017/6/20
	電子書	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML			2017/3/28