OPA4316-Q1

現行

汽車級、四路、5.5-V、10-MHz、50-mA 輸出電流、低雜訊 (11-nV/√Hz)、RRIO 運算放大器

立即訂購

產品規格表

document-pdfAcrobat OPAx316-Q1 10-MHz, Rail-to-Rail Input/Output, Low-Voltage, 1.8-V CMOS Operational Amplifier datasheet (Rev. A) (英文) PDF | HTML

現在提供此產品的更新版本

open-in-new

比較替代產品

具備升級功能，可直接投入使用替代所比較的裝置。

TLV9064-Q1

現行

適合成本最佳化應用的車規、四路、5.5-V、10-MHz、RRIO 運算放大器 Faster slew rate (6.5 V/us), lower offset voltage (1.6 mV)

OPA4316-Q1

現行

產品規格表

立即訂購

產品詳細資料

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.8

Rail-to-rail

In, Out

GBW (typ) (MHz)

10

Slew rate (typ) (V/µs)

6

Vos (offset voltage at 25°C) (max) (mV)

2.5

Iq per channel (typ) (mA)

0.4

Vn at 1 kHz (typ) (nV√Hz)

11

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

2

Features

EMI Hardened

Input bias current (max) (pA)

15

CMRR (typ) (dB)

86

Iout (typ) (A)

0.05

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.2

Input common mode headroom (to positive supply) (typ) (V)

0.2

Output swing headroom (to negative supply) (typ) (V)

0.005

Output swing headroom (to positive supply) (typ) (V)

-0.005

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.8

Rail-to-rail

In, Out

GBW (typ) (MHz)

10

Slew rate (typ) (V/µs)

6

Vos (offset voltage at 25°C) (max) (mV)

2.5

Iq per channel (typ) (mA)

0.4

Vn at 1 kHz (typ) (nV√Hz)

11

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

2

Features

EMI Hardened

Input bias current (max) (pA)

15

CMRR (typ) (dB)

86

Iout (typ) (A)

0.05

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.2

Input common mode headroom (to positive supply) (typ) (V)

0.2

Output swing headroom (to negative supply) (typ) (V)

0.005

Output swing headroom (to positive supply) (typ) (V)

-0.005

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level 3A
- Device CDM ESD Classification Level C5
Unity-Gain Bandwidth: 10 MHz
Low I_Q: 400 µA/ch
Wide Supply Range: 1.8 V to 5.5 V
Low Noise: 11 nV/√Hz at 1 kHz
Low Input Bias Current: ±5 pA
Offset Voltage: ±0.5 mV
Unity-Gain Stable
Internal RFI-EMI Filter
Extended Temperature Range: –40°C to +125°C

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level 3A
- Device CDM ESD Classification Level C5
Unity-Gain Bandwidth: 10 MHz
Low I_Q: 400 µA/ch
Wide Supply Range: 1.8 V to 5.5 V
Low Noise: 11 nV/√Hz at 1 kHz
Low Input Bias Current: ±5 pA
Offset Voltage: ±0.5 mV
Unity-Gain Stable
Internal RFI-EMI Filter
Extended Temperature Range: –40°C to +125°C

The OPAx316-Q1 family of single and dual operational amplifiers represents a new generation of general-purpose, low-power operational amplifiers. Featuring rail-to-rail input and output swings, low quiescent current (400 µA/ch typical) combined with a wide bandwidth of 10 MHz and very-low noise (11 nV/√Hz at 1 kHz) makes this family suitable for circuits requiring a good speed and power ratio. The low input bias current supports those operational amplifiers for applications with megaohm source impedances. The low input bias current of the OPAx316-Q1 yields a very-low current noise to make the device attractive for high impedance sensor interfaces.

The robust design of the OPAx316-Q1 provides ease-of-use to the circuit designer: a unity-gain stable, integrated RFI and EMI rejection filter, no phase reversal in overdrive condition, and high electrostatic discharge (ESD) protection (4-kV HBM).

These devices are optimized for low-voltage operation as low as 1.8 V (±0.9 V) and up to 5.5 V (±2.75 V). This latest addition of low-voltage CMOS automotive grade operational amplifiers provide a family of wide bandwidth, low noise, and low power that meet the needs of a wide variety of applications.

The OPAx316-Q1 family of single and dual operational amplifiers represents a new generation of general-purpose, low-power operational amplifiers. Featuring rail-to-rail input and output swings, low quiescent current (400 µA/ch typical) combined with a wide bandwidth of 10 MHz and very-low noise (11 nV/√Hz at 1 kHz) makes this family suitable for circuits requiring a good speed and power ratio. The low input bias current supports those operational amplifiers for applications with megaohm source impedances. The low input bias current of the OPAx316-Q1 yields a very-low current noise to make the device attractive for high impedance sensor interfaces.

The robust design of the OPAx316-Q1 provides ease-of-use to the circuit designer: a unity-gain stable, integrated RFI and EMI rejection filter, no phase reversal in overdrive condition, and high electrostatic discharge (ESD) protection (4-kV HBM).

These devices are optimized for low-voltage operation as low as 1.8 V (±0.9 V) and up to 5.5 V (±2.75 V). This latest addition of low-voltage CMOS automotive grade operational amplifiers provide a family of wide bandwidth, low noise, and low power that meet the needs of a wide variety of applications.

filter

尋找其它一般用途運算放大器

下載觀看有字幕稿的影片影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 3

重要文件	類型	標題	格式選項	日期
*	資料表	OPAx316-Q1 10-MHz, Rail-to-Rail Input/Output, Low-Voltage, 1.8-V CMOS Operational Amplifier datasheet (Rev. A)	PDF \| HTML	2017/1/3
	電子書	An Engineer’s Guide to Designing with Precision Amplifiers		2021/4/29
	電子書	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	2017/3/28