OPA548

現行

高電壓、高電流、寬輸出電壓擺幅功率運算放大器

立即訂購

產品規格表

document-pdfAcrobat OPA548 High-Voltage, High-Current Operational Amplifier datasheet (Rev. D) (英文) PDF | HTML

OPA548

現行

立即訂購

產品詳細資料

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

8

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

60

Iout (typ) (A)

3

GBW (typ) (MHz)

1

Slew rate (typ) (V/µs)

10

Vos (offset voltage at 25°C) (max) (mV)

10

Offset drift (typ) (µV/°C)

30

Iq per channel (typ) (mA)

17

Features

Adj Current Limit, Shutdown

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Input bias current (max) (pA)

500000

CMRR (typ) (dB)

95

Rail-to-rail

In to V-

Architecture

Bipolar

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

8

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

60

Iout (typ) (A)

3

GBW (typ) (MHz)

1

Slew rate (typ) (V/µs)

10

Vos (offset voltage at 25°C) (max) (mV)

10

Offset drift (typ) (µV/°C)

30

Iq per channel (typ) (mA)

17

Features

Adj Current Limit, Shutdown

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Input bias current (max) (pA)

500000

CMRR (typ) (dB)

95

Rail-to-rail

In to V-

Architecture

Bipolar

TO-263 (KTW)

7

153.924 mm² (10.1 mm × 15.24 mm)

TO-220 (KC)

7

46.5328 mm² (10.16 mm × 4.58 mm)

TO-220 (KVT)

7

83.9216 mm² (10.16 mm × 8.26 mm)

Wide supply range
- Single supply: 8 V to 60 V
- Dual supply: ±4 V to ±30 V
High-output current:
- 3-A continuous
- 5-A peak
Wide output voltage swing
Fully protected:
- Thermal shutdown
- Adjustable current limit
Output disable control˜
Thermal shutdown indicator
High slew rate: 10 V
Low quiescent current
Packages:
- 7-lead TO-220, zip and straight leads
- 7-lead DDPAK surface-mount

Wide supply range
- Single supply: 8 V to 60 V
- Dual supply: ±4 V to ±30 V
High-output current:
- 3-A continuous
- 5-A peak
Wide output voltage swing
Fully protected:
- Thermal shutdown
- Adjustable current limit
Output disable control˜
Thermal shutdown indicator
High slew rate: 10 V
Low quiescent current
Packages:
- 7-lead TO-220, zip and straight leads
- 7-lead DDPAK surface-mount

The OPA548 device is a low-cost, high-voltage, and high-current operational amplifier that is designed to drive a wide variety of loads. A laser-trimmed, monolithic, integrated circuit provides excellent low-level signal accuracy and high-output voltage and current.

The OPA548 operates from either single or dual supplies for design flexibility. In single-supply operation, the input common-mode range extends below ground.

The OPA548 is internally protected against overtemperature conditions and current overloads. In addition, the OPA548 is designed to provide an accurate, user-selected current limit. Unlike other designs that use a power resistor in series with the output current path, the OPA548 senses the load indirectly. The current limit is adjustable from 0 A to 5 A with an external resistor and potentiometer, or controllable digitally with a voltage-out or current-out DAC.

The Enable/Status (E/S) pin provides two functions. An input on the pin not only disables the output stage to effectively disconnect the load, but also reduces the quiescent current to conserve power. The E/S pin output can be monitored to determine if the OPA548 is in thermal shutdown.

The OPA548 device is available in an industry-standard 7-lead staggered and straight lead TO-220 package, and a 7-lead DDPAK surface-mount plastic power package. The copper tab allows easy mounting to a heat sink or circuit board for excellent thermal performance. The device is specified for operation over the extended industrial temperature range, –40°C to 85°C. A SPICE macromodel is available for design analysis.

The OPA548 device is a low-cost, high-voltage, and high-current operational amplifier that is designed to drive a wide variety of loads. A laser-trimmed, monolithic, integrated circuit provides excellent low-level signal accuracy and high-output voltage and current.

The OPA548 operates from either single or dual supplies for design flexibility. In single-supply operation, the input common-mode range extends below ground.

The OPA548 is internally protected against overtemperature conditions and current overloads. In addition, the OPA548 is designed to provide an accurate, user-selected current limit. Unlike other designs that use a power resistor in series with the output current path, the OPA548 senses the load indirectly. The current limit is adjustable from 0 A to 5 A with an external resistor and potentiometer, or controllable digitally with a voltage-out or current-out DAC.

The Enable/Status (E/S) pin provides two functions. An input on the pin not only disables the output stage to effectively disconnect the load, but also reduces the quiescent current to conserve power. The E/S pin output can be monitored to determine if the OPA548 is in thermal shutdown.

The OPA548 device is available in an industry-standard 7-lead staggered and straight lead TO-220 package, and a 7-lead DDPAK surface-mount plastic power package. The copper tab allows easy mounting to a heat sink or circuit board for excellent thermal performance. The device is specified for operation over the extended industrial temperature range, –40°C to 85°C. A SPICE macromodel is available for design analysis.

filter

尋找其它功率運算放大器

下載觀看有字幕稿的影片影片

您可能會感興趣的類似產品

open-in-new

比較替代產品

針腳對針腳的功能與所比較的裝置相同。

OPA549

現行

高電壓大電流運算放大器，出色的輸出擺幅 This device offers higher current drive (8-A)

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 5

重要文件	類型	標題	格式選項
*	資料表	OPA548 High-Voltage, High-Current Operational Amplifier datasheet (Rev. D)	PDF \| HTML	2019/12/18
	電子書	An Engineer’s Guide to Designing with Precision Amplifiers		2021/4/29
	電子書	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	2017/3/28
	應用說明	DC MOTOR SPEED CONTROLLER: Control a DC Motor without Tachometer Feedback		2000/9/27
	應用說明	Power Amplifier Stress and Power Handling Limitations		2000/9/27