OPA569
- HIGH OUTPUT CURRENT: 2A
- OUTPUT SWINGS TO: 150mV of Rails with IO =2A
- THERMAL PROTECTION
- ADJUSTABLE CURRENT LIMIT
- TWO FLAGS: Current Limit and Temperature Warning
- LOW SUPPLY VOLTAGE OPERATION: 2.7V to 5.5V
- SHUTDOWN FUNCTION WITH OUTPUT DISABLE
- SMALL POWER PACKAGE: SO-20 PowerPAD™
- APPLICATIONS
- THERMOELECTRIC COOLER DRIVER
- LASER DIODE PUMP DRIVER
- VALVE, ACTUATOR DRIVER
- SYNCHRO, SERVO DRIVER
- TRANSDUCER EXCITATION
- GENERAL LINEAR POWER BOOSTER FOR OP AMPS
- PARALLELING OPTION FOR HIGHER CURRENT APPLICATIONS
PowerPAD is a trademark of Texas Instruments.
The OPA569 is a low-cost, high-current, operational amplifier designed for driving a wide variety of loads while operating on low-voltage supplies. It operates from either single or dual supplies for design flexibility and has rail-to-rail swing on the input and output. Typical output swing is within 150mV of the supply rails, with output current of 2A. Output swing closer to the rails is achievable with lighter loads.
The OPA569 is unity gain stable, has low dc errors, is easy to use, and free from the phase inversion problems found in some power amplifiers. High performance is maintained at voltage swings near the output rails.
The OPA569 provides an accurate user-selected current limit that is set with an external resistor, or digitally adjusted via a Digital-to-Analog Converter.
The OPA569 output can be independently disabled using the Enable pin, saving power and protecting the load.
The IMONITOR pin provides a 1:475 bidirectional copy of the output current. This eliminates the need for a series current shunt resistor, allowing more voltage to be applied to the load. This pin can be used for simple monitoring, or feedback control to establish constant output current.
Two flags are provided: one for warning of thermal over-stress, and one for current limit condition. The Thermal Flag pin can be connected to the Enable pin to provide a thermal shutdown solution.
Packaged in the Texas Instruments PowerPAD™ package, it is small and easy to heat sink. The OPA569 is specified for operation over the extended industrial temperature range, –40°C to +85°C.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | OPA569: Rail-To-Rail I/O, 2A Power Amplifier datasheet (Rev. A) | 2003/10/22 | |||
| 電子書 | An Engineer’s Guide to Designing with Precision Amplifiers | 2021/4/29 | ||||
| 電子書 | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | 2017/3/28 | |||
| 應用說明 | Power Amplifier Stress and Power Handling Limitations | 2000/9/27 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。
除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。
TIDA-00155 — 適用於液體和固體光學分析的 DLP 近紅外線光譜儀參考設計
近紅外線 (NIR) 光譜儀參考設計採用德州儀器的 DLP 技術，並結合單元件 InGaAs 偵測器，以可攜式外形尺寸提供高性能量測，比使用昂貴的 InGaAs 陣列偵測器或脆弱的旋轉光柵架構更加經濟實惠。 NIR 光譜儀通常用於分析有機液體和固體，應用範圍包括食品、農業、藥品、石化和塑膠等。 結合強大的 Sitara™ 嵌入式處理器和類比訊號鏈元件，開發人員現在可將高階實驗室光譜儀的強大功能帶入現場和生產線。
TIPD103 — 橋接負載 (BTL) V-I 轉換器，0.5-4.5V 至 +/-2A
This Verified Design circuit is a bidirectional current source that can be used to drive floating loads, specifically thermo-electric coolers (TECs) from a single-ended source. The circuit makes use of an internal output current monitor circuit (IMON), which is a special feature of the OPA569 power (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| HSOIC (DWP) | 20 | Ultra Librarian |