The OPA830 is a low-power, single-supply, wideband, voltage-feedback amplifier designed to operate on a single 3V or 5V supply. The device also supports operation on ±5V or +10V supplies. The input range extends below the negative supply and to within 1.7V of the positive supply. Using complementary common-emitter outputs provides an output swing to within 25mV of either supply while driving 150Ω. High output drive current (±80mA) and low differential gain and phase errors also make this device an excellent choice for single-supply consumer video products.
Low distortion operation is provided by the high gain bandwidth product (110MHz) and slew rate (550V/µs), making the OPA830 an excellent input buffer stage to 3V and 5V CMOS ADCs. Unlike other low-power, single-supply amplifiers, distortion performance improves as the signal swing decreases. A low 9.2nV/√Hz input voltage noise supports wide dynamic range operation.
The OPA830 is available in an industry-standard SO-8 package, and in an ultra-small SOT23-5 package. For fixed-gain line driver applications, consider the OPA832.
| 重要文件 | 類型 | 標題 | 格式選項 | 日期 |
|---|---|---|---|---|
| * | Data sheet | OPA830 Low-Power, Single-Supply, Wideband Operational Amplifier datasheet (Rev. H) | PDF | HTML | 2024年 12月 10日 |
| E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 2017年 3月 28日 | ||
| Application note | RLC Filter Design for ADC Interface Applications (Rev. A) | 2015年 5月 13日 | ||
| Application note | Wideband Complementary Current Output DAC Single-Ended Interface (Rev. A) | 2015年 5月 8日 | ||
| Application note | Noise Analysis for High Speed Op Amps (Rev. A) | 2005年 1月 17日 | ||
| Application note | ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers | 2004年 4月 22日 | ||
| Application note | Measuring Board Parasitics in High-Speed Analog Design | 2003年 7月 7日 |
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
DEM-OPA-SOT-1A 是一種展示電路板，用於評估高速、寬頻運算放大器的運作和性能。此未組裝的 PC 電路板與採用小型電晶體 (SOT) DBV 封裝的產品相容。
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| SOT-23 (DBV) | 5 | Ultra Librarian |
Analog Engineer's Calc Installer
General calculator tool for analog design support.