首頁 放大器 運算放大器 (op amps) 高速運算放大器 (GBW ≥ 50 MHz)
首頁
放大器
運算放大器 (op amps)
高速運算放大器 (GBW ≥ 50 MHz)

OPA859

現行

1.8 GHz 單位增益頻寬、3.3 nV/√Hz、FET 輸入放大器

立即訂購
產品規格表

OPA859

現行
產品規格表 立即訂購

產品詳細資料

Architecture FET / CMOS Input, Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3.3 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.25 GBW (typ) (MHz) 900 BW at Acl (MHz) 1800 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 1150 Vn at flatband (typ) (nV√Hz) 3.3 Vn at 1 kHz (typ) (nV√Hz) 12.1 Iq per channel (typ) (mA) 20.5 Vos (offset voltage at 25°C) (max) (mV) 5 Rail-to-rail No Features Shutdown Rating Catalog Operating temperature range (°C) -40 to 125 CMRR (typ) (dB) 84 Input bias current (max) (pA) 5 Offset drift (typ) (µV/°C) 2 Iout (typ) (mA) 76 2nd harmonic (dBc) 90 3rd harmonic (dBc) 86 Frequency of harmonic distortion measurement (MHz) 10
Architecture FET / CMOS Input, Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3.3 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.25 GBW (typ) (MHz) 900 BW at Acl (MHz) 1800 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 1150 Vn at flatband (typ) (nV√Hz) 3.3 Vn at 1 kHz (typ) (nV√Hz) 12.1 Iq per channel (typ) (mA) 20.5 Vos (offset voltage at 25°C) (max) (mV) 5 Rail-to-rail No Features Shutdown Rating Catalog Operating temperature range (°C) -40 to 125 CMRR (typ) (dB) 84 Input bias current (max) (pA) 5 Offset drift (typ) (µV/°C) 2 Iout (typ) (mA) 76 2nd harmonic (dBc) 90 3rd harmonic (dBc) 86 Frequency of harmonic distortion measurement (MHz) 10
WSON (DSG) 8 4 mm² (2 mm × 2 mm) DIESALE (Y) — See data sheet
  • High unity-gain bandwidth: 1.8GHz
  • Gain bandwidth product: 900MHz
  • Ultra-low bias current MOSFET inputs: 10pA
  • Low input voltage noise: 3.3nV/√Hz
  • Slew rate: 1150V/µs
  • Low Input capacitance:
    • Common-mode: 0.6pF
    • Differential: 0.2pF
  • Wide input common-mode range:
    • 1.4V from positive supply
    • Includes negative supply
  • 2.5VPP output swing in TIA configuration
  • Supply voltage range: 3.3V to 5.25V
  • Quiescent current: 20.5mA
  • Package: 8-pin WSON
  • Temperature range: –40°C to +125°C
  • High unity-gain bandwidth: 1.8GHz
  • Gain bandwidth product: 900MHz
  • Ultra-low bias current MOSFET inputs: 10pA
  • Low input voltage noise: 3.3nV/√Hz
  • Slew rate: 1150V/µs
  • Low Input capacitance:
    • Common-mode: 0.6pF
    • Differential: 0.2pF
  • Wide input common-mode range:
    • 1.4V from positive supply
    • Includes negative supply
  • 2.5VPP output swing in TIA configuration
  • Supply voltage range: 3.3V to 5.25V
  • Quiescent current: 20.5mA
  • Package: 8-pin WSON
  • Temperature range: –40°C to +125°C

The OPA859 is a wideband, low-noise operational amplifier with CMOS inputs for wideband transimpedance and voltage amplifier applications. When the device is configured as a transimpedance amplifier (TIA), the 0.9GHz gain bandwidth product (GBWP) enables high closed-loop bandwidths in low-capacitance photodiode applications.

The following graph shows the bandwidth and noise performance of the OPA859 as a function of the photodiode capacitance when the amplifier is configured as a TIA. The total noise is calculated along a bandwidth range extending from dc to the calculated frequency (f) on the left scale. The OPA859 package has a feedback pin (FB) that simplifies the feedback network connection between the input and the output.

The OPA859 is optimized to operate in optical time-of-flight (ToF) systems where the OPA859 is used with time-to-digital converters, such as the TDC7201. Use the OPA859 to drive a high-speed analog-to-digital converter (ADC) in high-resolution LIDAR systems with a differential output amplifier, such as the THS4541 or LMH5401 devices.

The OPA859 is a wideband, low-noise operational amplifier with CMOS inputs for wideband transimpedance and voltage amplifier applications. When the device is configured as a transimpedance amplifier (TIA), the 0.9GHz gain bandwidth product (GBWP) enables high closed-loop bandwidths in low-capacitance photodiode applications.

The following graph shows the bandwidth and noise performance of the OPA859 as a function of the photodiode capacitance when the amplifier is configured as a TIA. The total noise is calculated along a bandwidth range extending from dc to the calculated frequency (f) on the left scale. The OPA859 package has a feedback pin (FB) that simplifies the feedback network connection between the input and the output.

The OPA859 is optimized to operate in optical time-of-flight (ToF) systems where the OPA859 is used with time-to-digital converters, such as the TDC7201. Use the OPA859 to drive a high-speed analog-to-digital converter (ADC) in high-resolution LIDAR systems with a differential output amplifier, such as the THS4541 or LMH5401 devices.
filter 尋找其它 高速運算放大器 (GBW ≥ 50 MHz)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
OPA3S2859 現行 雙通道 900-MHz、2.2 nV/√Hz 可編程增益轉阻放大器 A single-channel amplifier that has a similar FET input and 900-MHz bandwidth, but without integrated switches for configurable gain options
LMH34400 現行 具備整合式夾鉗和環境光線消除功能的 240-MHz 單端轉阻放大器 Integrated transimpedance amplifier with 40 kΩ gain for single-ended optical systems
LMH32401 現行 可編程增益差動輸出高速轉阻放大器 This device is an integrated TIA with differential outputs for LiDAR applications

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 9
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 OPA859 1.8GHz Unity-Gain Bandwidth, 3.3nV/√Hz, FET Input Amplifier datasheet (Rev. A) PDF | HTML 2025/5/5
白皮書 汽車光達簡介 (Rev. D) PDF | HTML Download English Version (Rev.D) PDF | HTML 2025/4/24
Product overview Pairing High-Speed JFET Amplifiers With Hi-Z DAQ Systems PDF | HTML 2024/4/8
Application brief LiFi: TI High-Speed Products for Optical Wireless Communication PDF | HTML 2023/8/7
應用說明 Choosing an Amplifier for Wide Bandwidth, High-Impedance, Data Acquisition AFEs PDF | HTML 2023/3/2
技術文章 3 common questions when designing with high-speed amplifiers PDF | HTML 2020/7/17
技術文章 What you need to know about transimpedance amplifiers – part 2 PDF | HTML 2016/9/1
技術文章 What you need to know about transimpedance amplifiers – part 1 PDF | HTML 2016/5/6
技術文章 SPICE it up: How to extract the input capacitance of an op amp (part 3) PDF | HTML 2016/3/21

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DEM-OPA-WSON8-EVM — 適用於 8 接腳 WSON (DSG) 封裝單通道運算放大器的未組裝評估模組

DEM-OPA-WSON8-EVM 是用於 DSG（8 接腳 WSON）封裝中單通道運算放大器的未組裝評估模組。此 EVM 專為高速性能規格而設計，與增益頻寬超過 1GHz 的放大器相容。
使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

OPA859 PSpice Model

SBOMBQ2.ZIP (160 KB) - PSpice 模型
支援產品和硬體
模擬型號

OPA859 TINA-TI Reference Design

SBOMAS3.TSC (71 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

OPA859 TINA-TI Spice Model

SBOMAS2.ZIP (10 KB) - TINA-TI Spice 模型
支援產品和硬體
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。

除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WSON (DSG) 8 Ultra Librarian
DIESALE (Y) — Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片