首頁 放大器 全差分放大器
首頁
放大器
全差分放大器

OPA862

現行

12.6V、低雜訊、單端到差分、高輸入阻抗放大器

立即訂購
產品規格表

OPA862

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12.6 BW at Acl (MHz) 44 Acl, min spec gain (V/V) 2 Slew rate (typ) (V/µs) 140 Architecture Bipolar, Differential Amplifier, High Input Impedance Vn at flatband (typ) (nV√Hz) 2.3 Iq per channel (typ) (mA) 3.1 Rail-to-rail Out Vos (offset voltage at 25°C) (max) (mV) 0.325 Operating temperature range (°C) -40 to 125 Iout (typ) (mA) 60 2nd harmonic (dBc) -122 3rd harmonic (dBc) -140 Frequency of harmonic distortion measurement (MHz) 0.05 GBW (typ) (MHz) 400 Input bias current (max) (pA) 3100000 Features Shutdown CMRR (typ) (dB) 120 Rating Catalog
Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12.6 BW at Acl (MHz) 44 Acl, min spec gain (V/V) 2 Slew rate (typ) (V/µs) 140 Architecture Bipolar, Differential Amplifier, High Input Impedance Vn at flatband (typ) (nV√Hz) 2.3 Iq per channel (typ) (mA) 3.1 Rail-to-rail Out Vos (offset voltage at 25°C) (max) (mV) 0.325 Operating temperature range (°C) -40 to 125 Iout (typ) (mA) 60 2nd harmonic (dBc) -122 3rd harmonic (dBc) -140 Frequency of harmonic distortion measurement (MHz) 0.05 GBW (typ) (MHz) 400 Input bias current (max) (pA) 3100000 Features Shutdown CMRR (typ) (dB) 120 Rating Catalog
SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm) WSON (DTK) 8 9 mm² (3 mm × 3 mm)
  • Wide Supply Range: 3 V to 12.6 V
  • High Input Impedance: 325 MΩ
  • Voltage Noise:
    • Input-Referred (f ≥ 5 kHz): 2.3 nV/√ Hz
    • Output-Referred (f ≥ 10 kHz): 8.3 nV/√ Hz
  • Differential Output Offset: ±700 µV (Maximum)
  • Output Offset Drift: ±1.5 µV/°C (Typical)
  • A2 Bias Current Cancellation, IB: ±5 nA (Typical)
  • Gain-Bandwidth Product: 400 MHz
  • Small-Signal Bandwidth: 44 MHz (G = 2 V/V)
  • Slew Rate: 140 V/µs
  • HD2, HD3 (VOD = 10 VPP, 50 kHz): –122 dBc, –140 dBc
  • Rail-to-Rail Output:
    • High Linear Output Current: 60 mA (Typical)
  • Quiescent Current: 3.1 mA
  • Disable mode: 12-µA Quiescent Current
  • Extended Temperature Operation: –40°C to +125°C
  • Wide Supply Range: 3 V to 12.6 V
  • High Input Impedance: 325 MΩ
  • Voltage Noise:
    • Input-Referred (f ≥ 5 kHz): 2.3 nV/√ Hz
    • Output-Referred (f ≥ 10 kHz): 8.3 nV/√ Hz
  • Differential Output Offset: ±700 µV (Maximum)
  • Output Offset Drift: ±1.5 µV/°C (Typical)
  • A2 Bias Current Cancellation, IB: ±5 nA (Typical)
  • Gain-Bandwidth Product: 400 MHz
  • Small-Signal Bandwidth: 44 MHz (G = 2 V/V)
  • Slew Rate: 140 V/µs
  • HD2, HD3 (VOD = 10 VPP, 50 kHz): –122 dBc, –140 dBc
  • Rail-to-Rail Output:
    • High Linear Output Current: 60 mA (Typical)
  • Quiescent Current: 3.1 mA
  • Disable mode: 12-µA Quiescent Current
  • Extended Temperature Operation: –40°C to +125°C

The OPA862 is a single-ended to differential analog-to-digital converter (ADC) driver with high input impedance for directly interfacing with sensors. The device only consumes 3.1-mA quiescent current for an output-referred noise density of 8.3 nV/√ Hz in a gain of 2-V/V configuration. A fully differential amplifier configured in a gain of 1 V/V with 1-kΩ resistors must be less than 1 nV/√ Hz to achieve the OPA862 equivalent output-referred noise density of 8.3 nV/√ Hz. The OPA862 can be configured for other gains using external resistors. The device has a large gain-bandwidth product of 400 MHz and a slew rate of 140 V/µs. This yields exceptional linearity and fast-settling, 18-bit performance over comparable single-ended-to-differential ADC drivers. The device includes a reference input pin for setting the output common-mode voltage.

The OPA862 is fully characterized to operate over a wide supply range of 3 V to 12.6 V, and features a rail-to-rail output stage. The device is fabricated using Texas Instruments’ proprietary, high-speed, silicon-germanium (SiGe) process and achieves exceptional distortion performance for 18-bit systems. The device includes a disable mode that consumes only 12-µA quiescent current in power-down state.

The OPA862 is rated to work over the extended industrial temperature range of –40°C to +125°C.

The OPA862 is a single-ended to differential analog-to-digital converter (ADC) driver with high input impedance for directly interfacing with sensors. The device only consumes 3.1-mA quiescent current for an output-referred noise density of 8.3 nV/√ Hz in a gain of 2-V/V configuration. A fully differential amplifier configured in a gain of 1 V/V with 1-kΩ resistors must be less than 1 nV/√ Hz to achieve the OPA862 equivalent output-referred noise density of 8.3 nV/√ Hz. The OPA862 can be configured for other gains using external resistors. The device has a large gain-bandwidth product of 400 MHz and a slew rate of 140 V/µs. This yields exceptional linearity and fast-settling, 18-bit performance over comparable single-ended-to-differential ADC drivers. The device includes a reference input pin for setting the output common-mode voltage.

The OPA862 is fully characterized to operate over a wide supply range of 3 V to 12.6 V, and features a rail-to-rail output stage. The device is fabricated using Texas Instruments’ proprietary, high-speed, silicon-germanium (SiGe) process and achieves exceptional distortion performance for 18-bit systems. The device includes a disable mode that consumes only 12-µA quiescent current in power-down state.

The OPA862 is rated to work over the extended industrial temperature range of –40°C to +125°C.
filter 尋找其它 全差分放大器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 OPA862 High Input Impedance, Single-Ended to Differential ADC Driver datasheet (Rev. C) PDF | HTML 2020/8/19
Application brief Why Use an FDA to Drive an ADC? PDF | HTML 2026/1/8

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

OPA862DEVM — OPA862 評估模組

OPA862DEVM 是一款採用 D 封裝且適用於單 OPA862 放大器的評估模組。此評估模組可快速且輕鬆展示放大器的功能性和多元用途。EVM 隨時可透過板載連接器來連接電源、訊號源和測試儀器。EVM 已配置為可透過其輸入與輸出，輕鬆連接常見的 50-Ω 實驗室設備。該放大器配置為單端輸入，增益為 4 V/V，並在裝置引腳處輸出差動信號，透過變壓器轉換為單端輸出。EVM 可以輕鬆針對其他增益及單一或分離電源運作進行配置。OPA862DEVM 內建 2kΩ 板載負載以供放大器使用。輸出變壓器與電阻器網路可將此負載轉換為 50Ω 單端輸出。
使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

OPA862 PSpice Model (Rev. A)

SBOMB77A.ZIP (47 KB) - PSpice 模型
支援產品和硬體
模擬型號

OPA862 TINA-TI Spice Model (Rev. C)

SBOMAZ9C.TSC (34 KB) - TINA-TI Spice 模型
支援產品和硬體
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。

除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。

支援產品和硬體
計算工具

SBOR022 — TI FDA Calculator

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 8 Ultra Librarian
WSON (DTK) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片系列

觀看所有影片

影片