THS4222
- Rail-to-Rail Output Swing
- VO = –4.8/4.8 (RL = 2 k)
- High Speed
- 230 MHz Bandwidth (–3 dB, G= 1)
- 975 V/µs Slew Rate
- Ultra-Low Distortion
- HD2 = –90 dBc (f = 5 MHz, RL = 499)
- HD3 = –100 dBc (f = 5 MHz, RL = 499)
- High Output Drive, IO = 100 mA (typ)
- Excellent Video Performance
- 40 MHz Bandwidth (0.1 dB, G = 2)
- 0.007% Differential Gain
- 0.007° Differential Phase
- Wide Range of Power Supplies
- VS = 3 V to 15 V
- Power-Down Mode (THS4225/6)
- Evaluation Module Available
- APPLICATIONS
- Low-Voltage Analog-to-Digital Converter Preamplifier
- Active Filtering
- Video Applications
The THS4222 family is a set of rail-to-rail output single, dual, and triple low-voltage, high-output swing, low-distortion high-speed amplifiers ideal for driving data converters, video switching or low distortion applications. This family of voltage feedback amplifiers can operate from a single 15-V power supply down to a single 3-V power supply while consuming only 14 mA of quiescent current per channel. In addition, the family offers excellent ac performance with 230-MHz bandwidth, 975-V/µs slew rate and harmonic distortion (THD) at 90 dBc at 5 MHz.
技術文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4 類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | Low-Distortion High-Speed Rail-to-Rail Output Operational Amplifiers datasheet (Rev. G) | 2004年 1月 21日 | |
E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 2017年 3月 28日 | ||
Application note | Noise Analysis for High Speed Op Amps (Rev. A) | 2005年 1月 17日 | ||
EVM User's guide | THS4222EVM | 2002年 8月 28日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
計算工具
ANALOG-ENGINEER-CALC — 類比工程師計算機
The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
計算工具
VOLT-DIVIDER-CALC — Voltage divider calculation tool
The voltage divider calculation tool (VOLT-DIVIDER-CALC) quickly determines a set of resistors for a voltage divider. This KnowledgeBase JavaScript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. VOLT-DIVIDER-CALC can also be used to (...)
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
封裝 | 引腳 | 下載 |
---|---|---|
HVSSOP (DGN) | 8 | 檢視選項 |
SOIC (D) | 8 | 檢視選項 |
VSSOP (DGK) | 8 | 檢視選項 |
訂購與品質
內含資訊:
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
內含資訊:
- 晶圓廠位置
- 組裝地點