THS7530

現行

全差分連續可變增益放大器

立即訂購

產品規格表

document-pdfAcrobat THS7530 High-Speed, Fully Differential, Continuously Variable Gain Amplifier datasheet (Rev. E) (英文)

THS7530

現行

產品規格表

立即訂購

產品詳細資料

Features

Digital Gain Set, Integrated Clamps, Shutdown, Single-ended to Differential conversion

PGA/VGA

VGA

Number of channels

1

Vs (max) (V)

5.5

Vs (min) (V)

4.5

BW at Acl (MHz)

300

Acl, min spec gain (V/V)

3.8

Slew rate (typ) (V/µs)

1250

Iq per channel (typ) (mA)

40

Gain (max) (dB)

46.5

Rating

Catalog

Architecture

Fully Differential ADC Driver

Operating temperature range (°C)

-40 to 85

Features

Digital Gain Set, Integrated Clamps, Shutdown, Single-ended to Differential conversion

PGA/VGA

VGA

Number of channels

1

Vs (max) (V)

5.5

Vs (min) (V)

4.5

BW at Acl (MHz)

300

Acl, min spec gain (V/V)

3.8

Slew rate (typ) (V/µs)

1250

Iq per channel (typ) (mA)

40

Gain (max) (dB)

46.5

Rating

Catalog

Architecture

Fully Differential ADC Driver

Operating temperature range (°C)

-40 to 85

HTSSOP (PWP)

14

32 mm² 5 x 6.4

Low Noise: V_n = 1.1 nV/√ Hz, Noise Figure = 9 dB
Low Distortion:
- HD₂ = –65 dBc, HD₃ = –61 dBc at 32 MHz
- IMD₃ = –62 dBc, OIP₃ = 21 dBm at 70 MHz
300-MHz Bandwidth
Continuously Variable Gain Range: 11.6 dB to 46.5 dB
Gain Slope: 38.8 dB/V
Fully Differential Input and Output
Output Common-Mode Voltage Control
Output Voltage Limiting

Low Noise: V_n = 1.1 nV/√ Hz, Noise Figure = 9 dB
Low Distortion:
- HD₂ = –65 dBc, HD₃ = –61 dBc at 32 MHz
- IMD₃ = –62 dBc, OIP₃ = 21 dBm at 70 MHz
300-MHz Bandwidth
Continuously Variable Gain Range: 11.6 dB to 46.5 dB
Gain Slope: 38.8 dB/V
Fully Differential Input and Output
Output Common-Mode Voltage Control
Output Voltage Limiting

The THS7530 device is fabricated using Texas Instruments’ state-of-the-art BiCom III SiGe complementary bipolar process. The THS7530 device is a DC-coupled, wide bandwidth amplifier with voltage-controlled gain. The amplifier has high-impedance differential inputs and low-impedance differential outputs with high-bandwidth gain control, output common-mode control, and output voltage clamping.

Signal-channel performance is exceptional with 300-MHz bandwidth, and third harmonic distortion of –61 dBc at 32 MHz with 1-V_PP output into 400 Ω.

Gain control is linear in dB with 0 V to 0.9 V varying the gain from 11.6 dB to 46.5 dB with 38.8-dB/V gain slope.

Output voltage limiting is provided to limit the output voltage swing and to prevent saturating following stages.

The device is characterized for operation over the industrial temperature range, –40°C to +85°C.

The THS7530 device is fabricated using Texas Instruments’ state-of-the-art BiCom III SiGe complementary bipolar process. The THS7530 device is a DC-coupled, wide bandwidth amplifier with voltage-controlled gain. The amplifier has high-impedance differential inputs and low-impedance differential outputs with high-bandwidth gain control, output common-mode control, and output voltage clamping.

Signal-channel performance is exceptional with 300-MHz bandwidth, and third harmonic distortion of –61 dBc at 32 MHz with 1-V_PP output into 400 Ω.

Gain control is linear in dB with 0 V to 0.9 V varying the gain from 11.6 dB to 46.5 dB with 38.8-dB/V gain slope.

Output voltage limiting is provided to limit the output voltage swing and to prevent saturating following stages.

The device is characterized for operation over the industrial temperature range, –40°C to +85°C.

filter

尋找其它可編程與可變增益放大器 (PGA 與 VGA)

下載觀看有字幕稿的影片影片

技術文件

star

=TI 所選的此產品重要文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 4

	類型	標題	日期
*	Data sheet	THS7530 High-Speed, Fully Differential, Continuously Variable Gain Amplifier datasheet (Rev. E)	2020年 8月 14日
	E-book	The Signal e-book: A compendium of blog posts on op amp design topics	2017年 3月 28日
	EVM User's guide	THS7530EVM (Rev. A)	2010年 4月 2日
	Application note	Noise Analysis for High Speed Op Amps (Rev. A)	2005年 1月 17日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

THS7530EVM — THS7530 評估模組

The THS7530 EVM provides 50 ohm input and output termination for easy evaluation with common 50 ohm test equipment.

使用指南: PDF

TI.com 無法提供

模擬型號

THS7530 PSpice Model (Rev. A)

SLOJ139A.ZIP (36 KB) - PSpice Model

下載

模擬型號

THS7530 TINA-TI Reference Design (Rev. B)

SLAC091B.TSC (123 KB) - TINA-TI Reference Design

下載

模擬型號

THS7530 TINA-TI Spice Model (Rev. A)

SLAM020A.ZIP (4 KB) - TINA-TI Spice Model

下載

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)

要求

模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

使用指南: PDF

檢視選項

封裝	引腳	下載
HTSSOP (PWP)	14	檢視選項

適用 TI 的評估品項標準條款與條件。

THS7530

全差分連續可變增益放大器

THS7530

產品詳細資料

技術文件

設計與開發

THS7530EVM — THS7530 評估模組

THS7530 PSpice Model (Rev. A)

THS7530 TINA-TI Reference Design (Rev. B)

THS7530 TINA-TI Spice Model (Rev. A)

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

影片系列

影片