TLV713P
- Stable Operation With or Without Capacitors
- Foldback Overcurrent Protection
- Packages:
- 1-mm × 1-mm 4-Pin X2SON
- 5-Pin SOT-23
- Very Low Dropout: 230 mV at 150 mA
- Accuracy: 1%
- Low IQ: 50 µA
- Input Voltage Range: 1.4 V to 5.5 V
- Available in Fixed-Output Voltages:
1 V to 3.3 V - High PSRR: 65 dB at 1 kHz
- Active Output Discharge (P Version Only)
The TLV713 series of low-dropout (LDO) linear regulators are low quiescent current LDOs with excellent line and load transient performance and are designed for power-sensitive applications. These devices provide a typical accuracy of 1%.
The TLV713 series of devices is designed to be stable without an output capacitor. The removal of the output capacitor allows for a very small solution size. However, the TLV713 series is also stable with any output capacitor if an output capacitor is used.
The TLV713 also provides inrush current control during device power up and enabling. The TLV713 limits the input current to the defined current limit to avoid large currents from flowing from the input power source. This functionality is especially important in battery-operated devices.
The TLV713 series is available in standard DQN and DBV packages. The TLV713P provides an active pulldown circuit to quickly discharge output loads.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TLV713 Capacitor-Free, 150-mA, Low-Dropout Regulator With Foldback Current Limit for Portable Devices datasheet (Rev. F) | PDF | HTML | 2019年 8月 21日 |
| Application note | A Topical Index of TI LDO Application Notes (Rev. F) | 2019年 6月 27日 | ||
| Application note | Accurate Thermal Calculations on the Back of a Napkin | 2019年 6月 3日 | ||
| Selection guide | Low Dropout Regulators Quick Reference Guide (Rev. P) | 2018年 3月 21日 | ||
| EVM User's guide | TLV713xxEVM-171 Evaluation Module User's Guide | 2012年 8月 17日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
MULTIPKGLDOEVM-823 — 支援 DBV、DRB、DRV 和 DQN 封裝的通用 LDO 線性穩壓器評估模組
MULTIPKGLDOEVM-823 評估模組 (EVM) 可協助您評估多種常用線性穩壓器封裝的運作與性能，以了解是否可在電路應用中使用。此特定 EVM 配置具有 DRB、DRV、DQN 和 DBV 元件封裝，能讓您焊接並評估低壓差 (LDO) 穩壓器。
TLV71312PEVM-171 — 150mA 低壓差穩壓器評估模組
TLV71318PEVM-171 — TLV71318P 150mA LDO 穩壓器評估模組
TIDA-010054 — 適合於 Level 3 電動車充電站的雙向有源電橋參考設計
TIDA-010062 — 1-kW、80+ 鈦金，以及 GaN CCM 圖騰柱免橋接 PFC 和半橋接 LLC 搭配 LFU 參考設計
TIDA-00373 — 透過環境光與近距感測器執行背光及智慧照明控制的參考設計
Watch related videos about Sensing NOW.
TIDA-050007 — 無線耳塞式耳機電池的超低待機電源參考設計
TIDA-01364 — 透過白光 LED 驅動器、環境光與近距感測器執行智慧背光控制參考設計
TIDA-00754 — 基於環境光和雜訊抗擾近距感測器的智慧照明和背光控制參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
| X2SON (DQN) | 4 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。