TLV774-Q1

預覽

TLV774-Q1

預覽

產品詳細資料

沒有此產品的參數。
  • AEC-Q100 qualified for automotive applications:
    • Ambient temperature: –40°C to +125°C, TA
    • Junction temperature: –40°C to +150°C, TJ
  • High PSRR: 60dB (1kHz), 45dB (1MHz)
  • VIN range: 1.4V to 5.5V
  • Fixed output voltage range: 0.6V to 3.3V
  • Output voltage accuracy: 2%
  • Low dropout voltage:
    • 165mV maximum at 300mA (3.3VOUT)
  • Foldback current limit
  • Active output pulldown resistor
  • Package: 2mm × 2mm, 6-pin WSON (DRV)
  • AEC-Q100 qualified for automotive applications:
    • Ambient temperature: –40°C to +125°C, TA
    • Junction temperature: –40°C to +150°C, TJ
  • High PSRR: 60dB (1kHz), 45dB (1MHz)
  • VIN range: 1.4V to 5.5V
  • Fixed output voltage range: 0.6V to 3.3V
  • Output voltage accuracy: 2%
  • Low dropout voltage:
    • 165mV maximum at 300mA (3.3VOUT)
  • Foldback current limit
  • Active output pulldown resistor
  • Package: 2mm × 2mm, 6-pin WSON (DRV)

The TLV774-Q1 is a small, low-dropout (LDO) linear regulator that sources 300mA of output current. This LDO is designed to provide a voltage source with high PSRR. This device also provides load and line transient performance that meets the requirements of a variety of circuits. With a 1.4V to 5.5V input voltage range and a 0.6V to 3.3V output voltage range, the TLV774-Q1 is flexible enough for use in multiple applications.

The TLV774-Q1 features an internal soft-start circuit to avoid excessive inrush current, therefore minimizing the input voltage drop during start-up. An active pulldown circuit quickly discharges the output when the LDO is disabled and provides a known start-up state. The EN input allows an external logic signal to enable or disable the regulated output. The LDO is stable with small ceramic capacitors, allowing for a small overall package size. The operating junction temperature range is from −40°C to +150°C. This LDO is available in a standard 2mm × 2mm WSON (DRV) package.

The TLV774-Q1 is a small, low-dropout (LDO) linear regulator that sources 300mA of output current. This LDO is designed to provide a voltage source with high PSRR. This device also provides load and line transient performance that meets the requirements of a variety of circuits. With a 1.4V to 5.5V input voltage range and a 0.6V to 3.3V output voltage range, the TLV774-Q1 is flexible enough for use in multiple applications.

The TLV774-Q1 features an internal soft-start circuit to avoid excessive inrush current, therefore minimizing the input voltage drop during start-up. An active pulldown circuit quickly discharges the output when the LDO is disabled and provides a known start-up state. The EN input allows an external logic signal to enable or disable the regulated output. The LDO is stable with small ceramic capacitors, allowing for a small overall package size. The operating junction temperature range is from −40°C to +150°C. This LDO is available in a standard 2mm × 2mm WSON (DRV) package.

下載 觀看有字幕稿的影片 影片

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片