TMAG5230

現行

高性能小型 (WCSP) 霍爾效應開關

立即訂購

產品規格表

document-pdfAcrobat TMAG5230 Low Power Z-Axis Hall-Effect Switch in WCSP datasheet (Rev. B) (英文) PDF | HTML

TMAG5230

現行

產品規格表

立即訂購

產品詳細資料

Type

Omnipolar switch, Unipolar switch

Supply current (µA)

4.1, 4.5

Bandwidth (kHz)

0.02

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Output

Open-drain, Push-Pull output driver

Type

Omnipolar switch, Unipolar switch

Supply current (µA)

4.1, 4.5

Bandwidth (kHz)

0.02

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Output

Open-drain, Push-Pull output driver

DSBGA (YBK)

4

0.847364 mm² (1.142 mm × 0.742 mm)

DSBGA (YBH)

4

0.64 mm² (0 mm × 0 mm)

Supply voltage range: 1.65V to 5.5V
Ambient temperature range: –40°C to 125°C
Magnetic pole detection options:
- Omnipolar
- Dual-unipolar
Output type:
- Push-pull
- Open-drain
Active output state (when B > BOP): low (VOL)
Magnetic operate points(BOP):
- 2.4mT to 24mT
Low average current consumption of 1.6µA
Sampling rates:
- 1.25Hz to 2.5kHz
Industry standard 4-pin DSBGA package

Supply voltage range: 1.65V to 5.5V
Ambient temperature range: –40°C to 125°C
Magnetic pole detection options:
- Omnipolar
- Dual-unipolar
Output type:
- Push-pull
- Open-drain
Active output state (when B > BOP): low (VOL)
Magnetic operate points(BOP):
- 2.4mT to 24mT
Low average current consumption of 1.6µA
Sampling rates:
- 1.25Hz to 2.5kHz
Industry standard 4-pin DSBGA package

The TMAG5230 is a Hall-effect switch used in magnetic position sensing applications. The TMAG5230 product family is available in an ultra small form factor DSBGA(WCSP) package that supports both omnipolar and unipolar outputs. The device supports multiple combinations of high sensitivity thresholds with various sampling rates that allow flexible system design for magnet selection, sensitivity, and power requirements.

The device output type is available as a push-pull output to eliminate the need for an external pullup resistor, or as an open-drain output which allows the use of a IO voltage that is different than the TMAG5230 supply. The open-drain output can support voltages greater than VCC, eliminating the need for power-sequencing.

The TMAG5230 is a Hall-effect switch used in magnetic position sensing applications. The TMAG5230 product family is available in an ultra small form factor DSBGA(WCSP) package that supports both omnipolar and unipolar outputs. The device supports multiple combinations of high sensitivity thresholds with various sampling rates that allow flexible system design for magnet selection, sensitivity, and power requirements.

The device output type is available as a push-pull output to eliminate the need for an external pullup resistor, or as an open-drain output which allows the use of a IO voltage that is different than the TMAG5230 supply. The open-drain output can support voltages greater than VCC, eliminating the need for power-sequencing.

filter

尋找其它霍爾效應鎖存器和開關

下載觀看有字幕稿的影片影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 1

重要文件	類型	標題	格式選項	下載最新的英文版本		日期
*	資料表	TMAG5230 Low Power Z-Axis Hall-Effect Switch in WCSP datasheet (Rev. B)	PDF \| HTML			2026/2/24

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

HALL-ADAPTER-EVM — 霍爾感測器匯接轉接器評估模組

使用 HALL-ADAPTER-EVM 可加快開關型、閂鎖型與線性霍爾感測器的原型製作與測試，提供一種快速、簡便且低成本的方式與小型 IC 介接。您可以使用隨附的 Samtec 端子排連接任何支援的霍爾感測器，或直接將其接線至現有電路。支援的封裝完整清單包括 SOT-23、TO-92、X2SON、SOT-23-5/6、0.4mm 節距的 2x2 WCSP 及 MSOP-8。

使用指南: PDF | HTML

支援產品和硬體

有庫存

限制：

登入以進行訂購

lock

登入以檢視庫存

??asset.out-of-stock-ti_zh_TW??

無法提供

模擬工具