計算工具
TPS2378
- IEEE 802.3at Type-2 Hardware Classification with Status Flag
- Adapter Priority Input
- DC/DC Converter Enable
- Robust 100 V, 0.5-Ω Hotswap MOSFET
- Operating Current up to 850 mA
- 1-A (Typical) Operating Current Limit
- 15 kV and 8 kV System-level ESD Capability
- PowerPAD HSOP Package
All trademarks are the property of their respective owners.
This 8-pin integrated circuit contains all of the features needed to implement an IEEE802.3at type-2 powered device (PD). The low 0.5-Ω internal switch resistance, combined with the enhanced thermal dissipation of the PowerPAD™ package, enables this controller to continuously handle up to 0.85 A. The TPS2378 features an auxiliary power detect (APD) input, providing priority for an external power adapter. It also features a 100-V pass transistor, 140-mA inrush current limiting, type-2 indication, auto-retry fault protection, and an open-drain power-good output.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 10 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS2378 IEEE 802.3at PoE High-Power PD Interface datasheet (Rev. C) | PDF | HTML | 2015年 7月 23日 |
| Application note | PoE Powered Devices Debug Guidelines | PDF | HTML | 2021年 7月 19日 | |
| Application note | PoE PD Schematic Review Guidelines | PDF | HTML | 2021年 4月 29日 | |
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018年 6月 25日 | ||
| EVM User's guide | TPS2378EVM-602 Evaluation Module User's Guide (Rev. A) | 2017年 7月 31日 | ||
| Application note | Dual TPS2378 PD for 51-W High-Power Four-Pair PoE (Rev. A) | 2016年 6月 1日 | ||
| Technical article | May the forced UPOE be with you | 2015年 6月 15日 | ||
| Application note | Lightning Surge Considerations for PoE Powered Devices | 2015年 4月 30日 | ||
| EVM User's guide | TPS2378EVM-105 User's Guide | 2012年 3月 20日 | ||
| Application note | Advanced Adapter ORing Solutions using the TPS23753 (Rev. A) | 2009年 2月 9日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TPS2378EVM-105 — TPS2378 評估模組
The Texas Instruments TPS2378EVM-105 evaluation module (EVM) helps designers evaluate the performance of the TPS2378 IEEE 802.3at PoE High-Power PD Interface with AUX Control. The EVM is designed to look like the front end of any Power Over Ethernet (PoE) PD module. An RJ-45 connector is provided (...)
使用指南: PDF
開發板
TPS2378EVM-602 — 適用於強制 UPOE 51W 高功率四對 PoE 應用的雙 TPS2378 PoE PD 評估模組
The TPS2378EVM-602 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the dual TPS2378 four-pair, high power 51W applications. The TPS2378EVM-602 is a Forced UPOE compliant solution that requires no software. The EVM contains header connectors for easy connection to (...)
使用指南: PDF
模擬型號
TPS2378 Unencrypted PSpice Transient Model Package (Rev. A)
SLVM991A.ZIP (114 KB) - PSpice Model
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
參考設計
TIDA-00539 — 適用於強制 4 對 PoE PD 應用的 UPOE 高效率返馳式轉換器 (19V/2.3A) 參考設計
TIDA-00539 uses two TPS2378 PD controllers for a forced 4-pair UPOE solution to 51W non-standard PoE PD applications. It incorportates the UCC2897A controller in a high-efficiency, great transient response (driven) synch flyback converter capble of 19V at 2.3A.
參考設計
PMP10572 — 適用於 PoE 應用的 3 級隔離式 Fly-Buck 電源模組參考設計
The PMP10572 reference design is an single output isolated Fly-Buck power supply for PoE application. It takes 48V nominal input and provides 12V 1A output. The board is designed with TPS2378(PD controller) to provide 40V-57V input votlage and 12V 1SA output power. The design features the LM5160A (...)
參考設計
PMP9676 — 適用於 PoE PD 應用的 1 級非隔離式降壓轉換器 (5V/560mA) 參考設計
This converter is used for Class 1 PoE PD applications where isolation is not required. The TPS2378 PD controller plus LM5006 buck converter provide 5V/560mA with good efficieny in a small size. The LM5006 can be configured with a diode rectifier for lowest cost or a synchronous FET (...)
參考設計
PMP10812 — 2 類非隔離式 PoE 同步降壓轉換器 (5V/1A) 參考設計
The PMP10812 reference design is ideal for Class 2 PoE PD applications that do not require isolation. The TPS2378 PD controller provides the interface to the PSE. The LM5010 buck converter has an integrated high side FET and external low side diode rectifier for low cost.
參考設計
PMP11257 — 4 級 PoE 同步降壓轉換器 (12V/2A) 參考設計
The LM5116 synchronous buck controller provides a high efficiency solution for non-isolated PoE PD applications. The TPS2378 PoE PD controller performs all necessary functions for an IEEE802.3at compliant Class 4 PoE PD. This converter is ideal for any PoE application that demands best (...)
參考設計
TIDA-00741 — 適用於 PoE PD 應用的非標準 PoE、UPOE 高效率返馳式轉換器參考設計
TIDA-00741 uses two TPS2378 PD controllers for a forced 4-pair UPOE solution to 51W non-standard PoE PD applications. It incorportates the UCC2897A controller in a high-efficiency, great transient response (driven) synch flyback converter capble of 12V at 3.8A.
| 封裝 | 引腳 | 下載 |
|---|---|---|
| HSOIC (DDA) | 8 | 檢視選項 |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。