TPS2553-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level H2
- Device CDM ESD Classification Level C3B
- Up to 1.5-A Maximum Load Current
- ±6% Current-Limit Accuracy at 1.7 A (Typical)
- Meets Universal Serial Bus (USB) Current-Limiting Requirements
- Backwards Compatible With TPS2550/51 and TPS2551-Q1
- Adjustable Current-Limit, 75 mA–1300 mA (Typical)
- Constant-Current Version
- Fast Overcurrent Response - 2-µs (Typical)
- 85-mΩ High-Side MOSFET
- Reverse Input-Output Voltage Protection
- Operating Range: 2.5 V to 6.5 V
- Built-in Soft-Start
- 15 kV ESD Protection per IEC 61000-4-2 (With External Capacitance)
- See the TI Switch Portfolio
The TPS2553-Q1 power-distribution switch is intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered. It provides up to 1.5 A of continuous load current. This device offers a programmable current-limit threshold between 75 mA and 1.7 A (typical) via an external resistor. Current-limit accuracy as tight as ±6% can be achieved at the higher current-limit settings. The power-switch rise and fall times are controlled to minimize current surges during turn on and off.
The TPS2553-Q1 device limits the output current to a safe level by using a constant-current mode when the output load exceeds the current-limit threshold. An internal reverse-voltage comparator disables the power switch when the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT output asserts low during overcurrent and reverse-voltage conditions.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TPS2553-Q1 Precision Adjustable Current-Limited Power-Distribution Switches datasheet (Rev. B) | PDF | HTML | 2020/4/29 | ||
| 功能安全資訊 | TPS2553-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA | PDF | HTML | 2021/3/9 | |||
| EVM User's guide | Power-Distribution Switch with Adjustable Current-Limit Evaluation Module | 2008/10/8 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS2553DBV1EVM-364 — 適用於 TPS2553DBV1EVM-364 且含可調整限流的配電開關評估模組
The TPS2552/3DBVEVM and TPS2552/3DRVEVM are evaluation modules (EVM) for Texas Instruments’family of power-distribution switches with adjustable current-limit. These EVMs operate over a 2.5 V to 6.5 V range. An onboard jumper sets the output current-limit to either 0.5 A or (...)
TPS2553Q1EVM — TPS2553-Q1 精密電流限制配電開關評估模組
TIDA-00271 — 適用遠端攝影機和雷達模組的 ADAS 感測器互連參考設計基板
ADAS 感測器互連電路板適用於需要將攝影機、光達或雷達模組等遠端感測器連接至中央處理 ECU 的應用。電路板支援高達 3 個同軸和 1 個 LVDS 雙絞線資料輸入，以及 3 個 FMC 纜線和 1 個電路板至電路板連接器，以做為處理 ECU 的資料輸出。 透過同軸連接器（SMB 標準）連接的攝影機或其他感測器模組，直接透過互連板的同軸纜線（同軸電纜供電）供電。由於所有 IC 皆有獨立完整電源解決方案，且板載同軸纜線供電，因此單一汽車電池或類似寬電壓供應器可直接連接至 ADAS 感測器互連電路板上的電源接頭。板載 uC 和 LIN 介面可控制和配置互連電路板，以及隨插即用操作。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。