首頁 電源管理 電源保護開關與控制器 eFuse(整合式熱插拔)

TPS25940-Q1

現行

具有電流監控與電池短路保護功能的 2.7-V 至 18-V、42mΩ、0.6-5.3A 汽車 eFuse

產品詳細資料

Vabsmax_cont (V) 20 Vin (max) (V) 18 Vin (min) (V) 2.7 Current limit (max) (A) 5.3 Current limit (min) (A) 0.6 Features Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Reverse current blocking always, Short-circuit protection, Thermal shutdown Overcurrent response Current limiting Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 42 Overvoltage response Cut-off Rating Automotive Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.00014 Quiescent current (Iq) (max) (A) 0.00027 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
Vabsmax_cont (V) 20 Vin (max) (V) 18 Vin (min) (V) 2.7 Current limit (max) (A) 5.3 Current limit (min) (A) 0.6 Features Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Reverse current blocking always, Short-circuit protection, Thermal shutdown Overcurrent response Current limiting Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 42 Overvoltage response Cut-off Rating Automotive Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.00014 Quiescent current (Iq) (max) (A) 0.00027 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
WQFN (RVC) 20 12 mm² 4 x 3
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C5
  • 2.7-V to 18-V operating voltage, 20 V (maximum)
  • Total RON: 42 mΩ (typical)
  • 0.6-A to 5.3-A adjustable current limit (±8%)
  • IMON Current indicator output
    • ±8% accuracy for TPS25940-Q1/TPS25940L-Q1
  • Adjustable under-, overvoltage threshold (±2%)
  • Reverse current blocking
  • 1-µs reverse voltage shutoff
  • Programmable dVo/dt control
  • Power good and fault outputs
  • Short-to-battery protection
  • Short-to-ground protection
  • TPS25940-Q1/TPS259401A-Q1: auto-retry
  • TPS25940L-Q1: latch-off
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C5
  • 2.7-V to 18-V operating voltage, 20 V (maximum)
  • Total RON: 42 mΩ (typical)
  • 0.6-A to 5.3-A adjustable current limit (±8%)
  • IMON Current indicator output
    • ±8% accuracy for TPS25940-Q1/TPS25940L-Q1
  • Adjustable under-, overvoltage threshold (±2%)
  • Reverse current blocking
  • 1-µs reverse voltage shutoff
  • Programmable dVo/dt control
  • Power good and fault outputs
  • Short-to-battery protection
  • Short-to-ground protection
  • TPS25940-Q1/TPS259401A-Q1: auto-retry
  • TPS25940L-Q1: latch-off

The TPS25940xx-Q1 eFuse Power Switches are compact, feature rich power management devices with a full suite of protection functions. The wide operating range allows control of many popular DC bus voltages. Integrated back-to-back FETs provide bidirectional current control making the device well suited for systems with load side holdup energy that must not drain back to a failed supply bus.

Load, source and device protection are provided with many programmable features including overcurrent, dVo/dt ramp and overvoltage, undervoltage thresholds. For system status monitoring and downstream load control, the device provides PGOOD, FLT and precise current monitor output. Precise programmable undervoltage, overvoltage thresholds and mode simplify power management design.

The TPS25940xx-Q1 monitor V(IN) and V(OUT) to provide true reverse current blocking when V(IN) < (V(OUT) – 66 mV). This function supports supply bus protection from over-voltages during output short to battery faults.

The TPS25940xx-Q1 eFuse Power Switches are compact, feature rich power management devices with a full suite of protection functions. The wide operating range allows control of many popular DC bus voltages. Integrated back-to-back FETs provide bidirectional current control making the device well suited for systems with load side holdup energy that must not drain back to a failed supply bus.

Load, source and device protection are provided with many programmable features including overcurrent, dVo/dt ramp and overvoltage, undervoltage thresholds. For system status monitoring and downstream load control, the device provides PGOOD, FLT and precise current monitor output. Precise programmable undervoltage, overvoltage thresholds and mode simplify power management design.

The TPS25940xx-Q1 monitor V(IN) and V(OUT) to provide true reverse current blocking when V(IN) < (V(OUT) – 66 mV). This function supports supply bus protection from over-voltages during output short to battery faults.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 6
類型 標題 日期
* Data sheet TPS25940xx-Q1 2.7-V to 18-V eFuse with Integrated Short-to-Battery Protection datasheet (Rev. E) PDF | HTML 2021年 1月 29日
Functional safety information eFuse: Safety Certification and why it Matters 2020年 3月 18日
E-book 11 Ways to Protect Your Power Path 2019年 7月 3日
Application note Basics of eFuses (Rev. A) 2018年 4月 5日
Application note Charging Super Capacitor With eFuse 2017年 8月 8日
Application note Power Multiplexing Using Load Switches and eFuses (Rev. A) 2017年 6月 20日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS25940EVM-635 — TPS25940x 評估模組

The TPS25940XEVM-635 is an eFuse (Current Limiter with DEVSLP) that operates from 2.7V to 18V, and have integrated back-to-back FETs with programmable under-voltage, over-voltage, reverse-voltage, over-current and in-rush current protection. It also includes analog current monitoring in a small (...)

使用指南: PDF
TI.com 無法提供
模擬型號

TPS25940-Q1 Unencrypted PSpice Transient Model Package (Rev. B)

SLVMBN6B.ZIP (78 KB) - PSpice Model
模擬型號

TPS25940L-Q1 PSpice Transient Model

SLVMCQ3.ZIP (84 KB) - PSpice Model
計算工具

SLVC571 TPS2594x Design Calculation Tool

支援產品和硬體

支援產品和硬體

產品
eFuse(整合式熱插拔)
  • TPS25940 具有反向電流阻斷與 DevSleep 支援的 2.7-V 至 18-V、42mΩ、0.6-5.2A eFuse
  • TPS25940-Q1 具有電流監控與電池短路保護功能的 2.7-V 至 18-V、42mΩ、0.6-5.3A 汽車 eFuse
  • TPS25942A 具有反向電流阻斷、IMON 和 PG 的 2.7-V 至 18-V、42mΩ、0.6-5.2A eFuse
  • TPS25942L 具有反向電流阻斷和閉鎖故障反應功能的 2.7-V 至 18-V、42mΩ、0.6-5.2A eFuse
  • TPS25944A 具有反向電流阻斷和 4-ms 斷路器功能的 2.7-V 至 18-V、42mΩ、0.6-5.2A eFuse
  • TPS25944L 具有反向電流阻斷功能的 2.7-V 至 18-V、42mΩ、0.6-5.2A eFuse
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一,涵蓋我們的類比和電源產品組合,以及特定類比行為模型,且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前,建立完整的終端設備設計和解決方案原型,進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中,您可以搜尋 TI (...)
參考設計

TIDA-01413 — 具有兩個 4-Gbps 四路解串器的 ADAS 8 通道感測器融合集線器參考設計

此感測器融合集線器參考設計允許透過同軸纜線連接最多四台 2 百萬像素的攝影機和最多四組雷達模組。此設計運用這些同軸纜線為感測器提供電源、後通道通訊及時鐘同步。這兩個 4 Gbps FPD-Link III 四路解串器可透過 Samtec 連接器,支援行動工業處理器介面 (MIPI) 攝影機序列介面-2 (CSI-2) 到應用處理器的雙輸出。
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01514 — 用於天線模組的保護和輕載偵測參考設計

TIDA-01514 參考設計可為車用資訊娛樂與導航系統中使用的天線模組提供保護與診斷。此設計是天線低壓降線性穩壓器 (LDO) 的替代解決方案,旨在減少歐姆壓降 (IR),同時實現短路、電池短路、逆電流和過電壓保護等必要保護措施。此設計符合子系統級的診斷要求,例如精準的輕負載和過載偵測。
Design guide: PDF
電路圖: PDF
參考設計

PMP30046 — 企業級 SSD 備用電源參考設計

PMP30046 參考設計提供企業 SSD 備用電源供應器的系統解決方案。熱插拔控制器的輸入電壓可以是 5V 或 12V。降壓級將此輸入電壓轉換為 3.3V,最大負載電流為 2.5A。3.3V 升壓至 28V,用於為備用電容器充電。若發生電源故障事件,另一個降壓級會使用儲存在備用電容器中的能源,以 2.5A 最大負載電流向輸入軌供應 5V。
Test report: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RVC) 20 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片