首頁 電源管理 監控器和重設 IC 供應電壓監控器
首頁
電源管理
監控器和重設 IC
供應電壓監控器
最新

TPS37100-Q1

現行

具有低靜態電流的 105V 窗型監控器，適合 48V 與 72V 電源軌應用

立即訂購
產品規格表

TPS37100-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 0.8, Adjustable Features Analog output, Detection time delay, Reset time delay, Reverse polarity protection, Separate VDD & sense, Undervoltage and overvoltage monitor, Wide input voltage Reset threshold accuracy (%) 1.3 Iq (typ) (mA) 0.005 Output driver type/reset output Active-low, Open-drain Time delay (ms) 0.01 Watchdog timer WDI (s) None Operating temperature range (°C) -40 to 125
Rating Automotive Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 0.8, Adjustable Features Analog output, Detection time delay, Reset time delay, Reverse polarity protection, Separate VDD & sense, Undervoltage and overvoltage monitor, Wide input voltage Reset threshold accuracy (%) 1.3 Iq (typ) (mA) 0.005 Output driver type/reset output Active-low, Open-drain Time delay (ms) 0.01 Watchdog timer WDI (s) None Operating temperature range (°C) -40 to 125
SOT-23-THN (DYY) 14 13.692 mm² (4.2 mm × 3.26 mm)
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature TA
  • ASIL D Functional Safety-Compliant (Targeted for TPS37102-Q1)
    • Documentation to aid ISO 26262 system design
    • Systematic capability up to ASIL D targeted
    • Hardware capability up to ASIL D targeted
  • Functional Safety-Capable (TPS37100-Q1)
    • Documentation available to aid functional safety system design
  • Wide supply voltage range: 3V to 105V
  • Low quiescent current: 5µA
  • High threshold accuracy: 1.1% (maximum)
  • -95V reverse polarity protection on SENSE
  • 5µs fast UV/OV monitor for 24V/48V systems
  • Integrated buffer (AOUT) for supply voltage measurement with enable pin
  • Fixed and programmable release time delay
  • Fixed and programmable sense time delay
  • Open-drain, active-low output: OUT A and OUT B
  • BIST and Latch available for TPS37102-Q1
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature TA
  • ASIL D Functional Safety-Compliant (Targeted for TPS37102-Q1)
    • Documentation to aid ISO 26262 system design
    • Systematic capability up to ASIL D targeted
    • Hardware capability up to ASIL D targeted
  • Functional Safety-Capable (TPS37100-Q1)
    • Documentation available to aid functional safety system design
  • Wide supply voltage range: 3V to 105V
  • Low quiescent current: 5µA
  • High threshold accuracy: 1.1% (maximum)
  • -95V reverse polarity protection on SENSE
  • 5µs fast UV/OV monitor for 24V/48V systems
  • Integrated buffer (AOUT) for supply voltage measurement with enable pin
  • Fixed and programmable release time delay
  • Fixed and programmable sense time delay
  • Open-drain, active-low output: OUT A and OUT B
  • BIST and Latch available for TPS37102-Q1

The TPS37100-Q1 and TPS37102-Q1 are 105V input voltage supervisors with low quiescent current (5uA), fast detection time, and an integrated buffer for supply voltage measurements. This family of devices can be connected directly to a 24V / 48V / 72V battery or voltage rail for continuous monitoring of over (OV) or under (UV) voltage conditions. Wide hysteresis voltage options are available to ignore false output deassertions that are be caused by battery voltage transients.

The TPS37100-Q1 and TPS37102-Q1 include two outputs (OUT A and OUT B) that are used as separate OV and UV fault monitors enabling system to take different action based on the fault that occurs. Additionally, the AOUT pin provides a scaled down SENSE pin voltage output and is intended to be sampled by ADC for supply voltage measurements. The user can choose the scaling factor desired based on the orderable part selected. The TPS37102-Q1 comes with BIST which is implemented at start-up to verify device health as well as an optional latching feature on OUT A to help the system bring into a safe state when critical faults occurs.

The TPS37100-Q1 and TPS37102-Q1 are 105V input voltage supervisors with low quiescent current (5uA), fast detection time, and an integrated buffer for supply voltage measurements. This family of devices can be connected directly to a 24V / 48V / 72V battery or voltage rail for continuous monitoring of over (OV) or under (UV) voltage conditions. Wide hysteresis voltage options are available to ignore false output deassertions that are be caused by battery voltage transients.

The TPS37100-Q1 and TPS37102-Q1 include two outputs (OUT A and OUT B) that are used as separate OV and UV fault monitors enabling system to take different action based on the fault that occurs. Additionally, the AOUT pin provides a scaled down SENSE pin voltage output and is intended to be sampled by ADC for supply voltage measurements. The user can choose the scaling factor desired based on the orderable part selected. The TPS37102-Q1 comes with BIST which is implemented at start-up to verify device health as well as an optional latching feature on OUT A to help the system bring into a safe state when critical faults occurs.
filter 尋找其它 供應電壓監控器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS37100-Q1, TPS37102-Q1 Automotive 105V, 5μA, Window, Overvoltage, or Undervoltage Supervisor with Integrated Buffer for Supply Voltage Measurements datasheet (Rev. A) PDF | HTML 2025/9/25

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS3710XEVM — TPS3710X 評估模組

TPS3710XEVM 是適用於 TPS3710x-Q1 電壓監控器系列的評估模組 (EVM)。此 EVM 旨在為所有輸入與輸出針腳提供範例設計和測試點，以測試 TPS3700-Q1 和 TPS37102-Q1 的功能。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-23-THN (DYY) 14 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片