首頁 電源管理 監控器和重設 IC 重設與看門狗 IC

TPS3813-Q1

現行

具有可編程窗型監視功能的汽車電壓監控器 (重設 IC)

產品詳細資料

Rating Automotive Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 2.93, 4.55 Features Reset time delay, Undervoltage and overvoltage monitor, Watchdog timer, Window watchdog Reset threshold accuracy (%) 2, 2.2, 2.4 Iq (typ) (mA) 0.009 Output driver type/reset output Active-low, Open-drain Time delay (ms) 25 Watchdog timer WDI (s) Programmable TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125
Rating Automotive Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 2.93, 4.55 Features Reset time delay, Undervoltage and overvoltage monitor, Watchdog timer, Window watchdog Reset threshold accuracy (%) 2, 2.2, 2.4 Iq (typ) (mA) 0.009 Output driver type/reset output Active-low, Open-drain Time delay (ms) 25 Watchdog timer WDI (s) Programmable TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125
SOT-23 (DBV) 6 8.12 mm² (2.9 mm × 2.8 mm)
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM classification level 2
    • Device CDM classification level C4B
  • Window-watchdog with programmable delay and window ratio
  • 6-Pin SOT-23 package
  • Supply current of 9 µA (Typical)
  • Power-on reset generator with a fixed delay time of 25 ms
  • Precision supply-voltage monitor (VIT): 2.5 V, 3 V, 3.3 V, 5 V
  • Open-drain reset output
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM classification level 2
    • Device CDM classification level C4B
  • Window-watchdog with programmable delay and window ratio
  • 6-Pin SOT-23 package
  • Supply current of 9 µA (Typical)
  • Power-on reset generator with a fixed delay time of 25 ms
  • Precision supply-voltage monitor (VIT): 2.5 V, 3 V, 3.3 V, 5 V
  • Open-drain reset output

The TPS3813-Q1 supervisory circuits provide circuit initialization and timing supervision, primarily for DSPs and processor-based systems.

During power on, the RESET pin is asserted when the supply voltage (VDD) becomes higher than 1.1 V. Thereafter, the supervisory circuit monitors VDD and keeps the RESET pin active as long as VDD remains below the threshold voltage (VIT).

An internal timer delays the return of the output to the inactive (high) state to ensure proper system reset. The delay time, td = 25 ms typical, begins after VDD has risen above the threshold voltage (VIT). When the supply voltage drops below the threshold voltage (VIT), the output becomes active (low) again. No external components are required. All the devices of this family have a fixed-sense threshold voltage (VIT) set by an internal voltage divider.

For safety-critical applications, the TPS3813-Q1 family of device s incorporate a window-watchdog with programmable delay and window ratio. The upper limit of the watchdog time-out can be set by either connecting the WDT pin to GND or VDD, or by using an external capacitor. The lower limit, and thus the window ratio, is set by connecting the WDR pin to GND or VDD. The RESET pin will assert a reset to the microcontroller if the watchdog is incorrectly serviced.

The product spectrum is designed for supply voltages of 2.5 V, 3 V, 3.3 V, and 5 V. The device s are available in a 6-pin SOT-23 package. The device s are characterized for operation over a temperature range of –40°C to 125°C.

The TPS3813-Q1 supervisory circuits provide circuit initialization and timing supervision, primarily for DSPs and processor-based systems.

During power on, the RESET pin is asserted when the supply voltage (VDD) becomes higher than 1.1 V. Thereafter, the supervisory circuit monitors VDD and keeps the RESET pin active as long as VDD remains below the threshold voltage (VIT).

An internal timer delays the return of the output to the inactive (high) state to ensure proper system reset. The delay time, td = 25 ms typical, begins after VDD has risen above the threshold voltage (VIT). When the supply voltage drops below the threshold voltage (VIT), the output becomes active (low) again. No external components are required. All the devices of this family have a fixed-sense threshold voltage (VIT) set by an internal voltage divider.

For safety-critical applications, the TPS3813-Q1 family of device s incorporate a window-watchdog with programmable delay and window ratio. The upper limit of the watchdog time-out can be set by either connecting the WDT pin to GND or VDD, or by using an external capacitor. The lower limit, and thus the window ratio, is set by connecting the WDR pin to GND or VDD. The RESET pin will assert a reset to the microcontroller if the watchdog is incorrectly serviced.

The product spectrum is designed for supply voltages of 2.5 V, 3 V, 3.3 V, and 5 V. The device s are available in a 6-pin SOT-23 package. The device s are characterized for operation over a temperature range of –40°C to 125°C.

下載 觀看有字幕稿的影片 影片

查看 TI.com 庫存中的類似產品

規格相似的產品依可用的 TI.com 庫存排序。

立即檢視

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
TPS3852-Q1 現行 具有整合式窗型監視計時器的車用高準確度電壓監控器 Enhanced accuracy (0.8%) with manual-reset feature
TPS3850-Q1 現行 具窗口看門狗定時器和可編程延遲且適用 OV 和 UV 監控的車用窗口看門狗 Integrated window watchdog and window voltage monitoring option with enhanced accuracy (0.8%)

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 6
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS3813-Q1 Automotive Processor Supervisory Circuits With Window-Watchdog datasheet (Rev. H) PDF | HTML 2021/9/9
功能安全資訊 TPS3813-Q1 Functional Safety FIT Rate, FMD and Pin FMA (Rev. A) PDF | HTML 2025/6/17
應用說明 Voltage Supervisors (Reset ICs): Frequently Asked Questions (FAQs) (Rev. A) 2020/3/17
電子書 Voltage Supervisor and Reset ICs: Tips, Tricks and Basics 2019/6/28
應用說明 Window Watchdog Calculator for TPS3813 Voltage Supervisors (Rev. A) 2016/9/13
應用說明 All Window Watchdog Supervisors 2009/9/9

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS3813Q1EVM — 具有窗口看門狗功能的 TPS3813-Q1 處理器監控電路評估模組

TPS3813-Q1 裝置是具有看門狗功能的處理器監控電路,適用於使用 DSP、微控制器 (MCU) 或微處理器或重要安全之應用。內建的視窗看門狗允許可編程延遲和視窗比率,如果程序在任何子例程中應掛起,則可以重新執行定義的重設。使用 TPS3813Q1EVM 評估模組 (EVM) 來評估裝置。
使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-23 (DBV) 6 Ultra Librarian

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片