首頁 電源管理 AC/DC 和 DC/DC 控制器 (外部 FET)

TPS51211

現行

適用筆記型電腦電源的 4.5-V 至 28-V 同步降壓控制器

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 18 Vin (max) (V) 28 Vin (min) (V) 3 Vout (max) (V) 2.6 Vout (min) (V) 0.7 Control mode D-CAP Features Enable, Light-load efficiency, Power good, Synchronous rectification Operating temperature range (°C) -40 to 85 Iq (typ) (µA) 300 Duty cycle (max) (%) 90 Number of phases 1
Rating Catalog Topology Buck Iout (max) (A) 18 Vin (max) (V) 28 Vin (min) (V) 3 Vout (max) (V) 2.6 Vout (min) (V) 0.7 Control mode D-CAP Features Enable, Light-load efficiency, Power good, Synchronous rectification Operating temperature range (°C) -40 to 85 Iq (typ) (µA) 300 Duty cycle (max) (%) 90 Number of phases 1
WSON (DSC) 10 9 mm² 3 x 3
  • Wide Input Voltage Range: 3 V to 28 V
  • Output Voltage Range: 0.7 V to 2.6 V
  • Wide Output Load Range: 0 to 20 A+
  • Built-In 0.5% 0.7 V Reference
  • 290-kHz, Adaptive On-Time D-CAP™ MODE Control
  • 4700 ppm/°C RDS(on) Current Sensing
  • Internal 1-ms Voltage Servo Soft-Start
  • Pre-Charged Start-Up Capability
  • Built-In Output Discharge
  • Power Good Output
  • Integrated Boost Switch
  • Built-In OVP/UVP/OCP
  • Thermal Shutdown (Non-latch)
  • SON-10 (DSC) Package
  • Wide Input Voltage Range: 3 V to 28 V
  • Output Voltage Range: 0.7 V to 2.6 V
  • Wide Output Load Range: 0 to 20 A+
  • Built-In 0.5% 0.7 V Reference
  • 290-kHz, Adaptive On-Time D-CAP™ MODE Control
  • 4700 ppm/°C RDS(on) Current Sensing
  • Internal 1-ms Voltage Servo Soft-Start
  • Pre-Charged Start-Up Capability
  • Built-In Output Discharge
  • Power Good Output
  • Integrated Boost Switch
  • Built-In OVP/UVP/OCP
  • Thermal Shutdown (Non-latch)
  • SON-10 (DSC) Package

The TPS51211 is a small-sized single buck controller with adaptive on-time D-CAP™ Mode. The device is suitable for low output voltage, high current, PC system power rail and similar point-of-load (POL) power supply in digital consumer products. A small package with minimal pin-count saves space on the PCB, while a dedicated EN pin and pre-set frequency minimize design effort required for new designs. The skip-mode at light load condition, strong gate drivers and low-side FET RDS(on) current sensing supports low-loss and high efficiency, over a broad load range. The conversion input voltage which is the high-side FET drain voltage ranges from 3 V to 28 V and the output voltage ranges from 0.7 V to 2.6 V. The device requires an external 5-V supply. The TPS51211 is available in a 10-pin SON package specified from –40°C to 85°C.

The TPS51211 is a small-sized single buck controller with adaptive on-time D-CAP™ Mode. The device is suitable for low output voltage, high current, PC system power rail and similar point-of-load (POL) power supply in digital consumer products. A small package with minimal pin-count saves space on the PCB, while a dedicated EN pin and pre-set frequency minimize design effort required for new designs. The skip-mode at light load condition, strong gate drivers and low-side FET RDS(on) current sensing supports low-loss and high efficiency, over a broad load range. The conversion input voltage which is the high-side FET drain voltage ranges from 3 V to 28 V and the output voltage ranges from 0.7 V to 2.6 V. The device requires an external 5-V supply. The TPS51211 is available in a 10-pin SON package specified from –40°C to 85°C.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet High-Performance, Single Synchronous Step-Down Controller datasheet (Rev. B) 2013年 5月 14日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

TPS51211 TINA-TI Transient Reference Design

SLUM241.TSC (203 KB) - TINA-TI Reference Design
模擬型號

TPS51211 TINA-TI Transient Spice Model

SLUM242.ZIP (39 KB) - TINA-TI Spice Model
模擬型號

TPS51211 Unencrypted PSpice Transient Model Package (Rev. A)

SLUM142A.ZIP (47 KB) - PSpice Model
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WSON (DSC) 10 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片