TPS541620

現行

具有 4.5V 至 15V 輸入和進階電流模式的雙路 6A 同步 SWIFT™ 降壓轉換器

產品詳細資料

Iout (max) (A) 6 Vin (min) (V) 4.5 Vin (max) (V) 15 Topology Buck Type Converter Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 2000 Features Adjustable current limit, Enable, Frequency synchronization, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification Control mode ACM/AECM Vout (min) (V) 0.5 Vout (max) (V) 6 Rating Catalog Operating temperature range (°C) -40 to 150
Iout (max) (A) 6 Vin (min) (V) 4.5 Vin (max) (V) 15 Topology Buck Type Converter Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 2000 Features Adjustable current limit, Enable, Frequency synchronization, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification Control mode ACM/AECM Vout (min) (V) 0.5 Vout (max) (V) 6 Rating Catalog Operating temperature range (°C) -40 to 150
VQFN-HR (RPB) 25 15 mm² 5 x 3
  • Integrated 24-mΩ and 10-mΩ MOSFETs with lossless current sensing
  • Fixed-frequency, internally-compensated advanced current mode (ACM) control
  • Dual output with up to 6 A each output
  • Dual-phase, single output for up to 12 A
  • Phase interleaving operation for one or two phases
  • Synchronization to an external clock using SYNC and CLKO
  • 0.5-V to 5.5-V output voltage range
  • Four selectable PWM ramp options for each switching frequency to optimize control loop performance
  • Soft start time is configurable by an external cap in single-output, multi-phase configuration and is fixed at 1 ms for dual-output configuration
  • True differential remote sensing in multi-phase operation
  • Independent enable and power good
  • Four selectable switching frequency options of 500 kHz, 1 MHz, 1.5 MHz, and 2.0 MHz
  • Supports safe pre-biased start-up
  • Overtemperature protection with hysteresis
  • –40°C to 150°C operation junction temperature
  • 3-mm × 5-mm, 25-pin VQFN-HR package with 0.5-mm pitch
  • Integrated 24-mΩ and 10-mΩ MOSFETs with lossless current sensing
  • Fixed-frequency, internally-compensated advanced current mode (ACM) control
  • Dual output with up to 6 A each output
  • Dual-phase, single output for up to 12 A
  • Phase interleaving operation for one or two phases
  • Synchronization to an external clock using SYNC and CLKO
  • 0.5-V to 5.5-V output voltage range
  • Four selectable PWM ramp options for each switching frequency to optimize control loop performance
  • Soft start time is configurable by an external cap in single-output, multi-phase configuration and is fixed at 1 ms for dual-output configuration
  • True differential remote sensing in multi-phase operation
  • Independent enable and power good
  • Four selectable switching frequency options of 500 kHz, 1 MHz, 1.5 MHz, and 2.0 MHz
  • Supports safe pre-biased start-up
  • Overtemperature protection with hysteresis
  • –40°C to 150°C operation junction temperature
  • 3-mm × 5-mm, 25-pin VQFN-HR package with 0.5-mm pitch

The TPS541620 is a highly integrated non-isolated dual DC-DC converter that is capable of high-frequency operation in a 3-mm × 5-mm package. The device can be configured as two single 6-A rails or combined to drive a single 12-A current load. The device implements a fixed-frequency advanced current mode control (ACM) with selectable ramp amplitude configurations to optimize the loop bandwidth. Two mode selection pins (MODE1 and 2) are used to select switching frequency, configuration, clock phase delay, and internal compensation.

The TPS541620 is a highly integrated non-isolated dual DC-DC converter that is capable of high-frequency operation in a 3-mm × 5-mm package. The device can be configured as two single 6-A rails or combined to drive a single 12-A current load. The device implements a fixed-frequency advanced current mode control (ACM) with selectable ramp amplitude configurations to optimize the loop bandwidth. Two mode selection pins (MODE1 and 2) are used to select switching frequency, configuration, clock phase delay, and internal compensation.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品
TPS543620 現行 4-V 至 18-V 輸入、進階電流模式、6-A 同步 SWIFT™ 降壓轉換器 Smaller, more efficient power module with single output.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 8
類型 標題 日期
* Data sheet TPS541620 4.5-V to 15-V, Dual 6-A / Single 12-A, Synchronous Step-Down SWIFT™ Converter With Internal Compensation datasheet (Rev. A) PDF | HTML 2021年 3月 18日
Application brief Solving power design challenges in oscilloscope applications PDF | HTML 2023年 10月 31日
Application note Powering the AFE7920 with the TPS62913 Low-Ripple and Low-Noise Buck Converter (Rev. A) PDF | HTML 2021年 12月 13日
EVM User's guide TPS541620 2-Phase SWIFT™ Step-Down Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 2021年 5月 7日
Application brief Achieving High Thermal Performance in Compact Buck Power Modules PDF | HTML 2021年 2月 24日
EVM User's guide TPS541620DEVM-050 User's Guide PDF | HTML 2020年 11月 20日
Certificate TPS541620DEVM-050 EU Declaration of Conformity (DoC) 2020年 7月 23日
Certificate TPS541620SEVM-050 EU Declaration of Conformity (DoC) 2020年 7月 23日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS541620EVM — 單路和雙路輸出降壓 6-A 和 12-A 轉換器評估模組

TPS541620DEVM-050 (6-A) and TPS541620SEVM-050 (12-A) are evaluation modules (EVM) for the TPS541620. The TPS541620 is a dual, internally compensated step-down converter.  The TPS541620 is 3-mm x 5-mm package with two outputs that can be configured as two single rails or combined to drive (...)
使用指南: PDF | HTML
模擬型號

TPS541620 SIMPLIS Transient and Average Model

SNVMC59.ZIP (2509 KB) - SIMPLIS Model
封裝 引腳 下載
VQFN-HR (RPB) 25 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片