TPS5430-Q1

Name: TPS5430-Q1
Brand: TI
SKU: TPS5430-Q1
Price: 1.996 USD

現行

車用 5.5V 至 36V、500kHz 固定頻率 3A 降壓轉換器

立即訂購

產品規格表

document-pdfAcrobat TPS5430-Q1 Automotive, 3A, Wide-Input-Range Step-Down Converter datasheet (Rev. E) (英文) PDF | HTML

現在提供此產品的更新版本

open-in-new

比較替代產品

功能相同，但引腳輸出與所比較的產品不同

LMR33630AP-Q1

現行

汽車 3.8-V 至 36-V、3-A 同步降壓轉換器 Smaller footprint, higher efficiency, lower IQ and lower EMI.

TPS5430-Q1

現行

產品規格表

立即訂購

產品詳細資料

Iout (max) (A)

3

Vin (min) (V)

5.5

Vin (max) (V)

36

Topology

Buck

Type

Converter

Switching frequency (min) (kHz)

500

Switching frequency (max) (kHz)

500

Features

Enable, Over Current Protection, Soft Start Fixed

Control mode

Voltage mode

Vout (min) (V)

1.22

Vout (max) (V)

31

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.003

Iout (max) (A)

3

Vin (min) (V)

5.5

Vin (max) (V)

36

Topology

Buck

Type

Converter

Switching frequency (min) (kHz)

500

Switching frequency (max) (kHz)

500

Features

Enable, Over Current Protection, Soft Start Fixed

Control mode

Voltage mode

Vout (min) (V)

1.22

Vout (max) (V)

31

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.003

HSOIC (DDA)

8

29.4 mm² 4.9 x 6

Qualified for automotive applications
Wide input voltage range: 5.5V to 36V
Up to 3A continuous (4A peak) output current
High efficiency up to 95% enabled by 100mΩ integrated MOSFET switch
Wide output voltage range: adjustable down to 1.22V with 1.5% initial accuracy
Internal compensation minimizes external parts count
Fixed 500kHz switching frequency for small filter size
Improved line regulation and transient response by input voltage feed forward
System protected by overcurrent limiting, overvoltage protection, and thermal shutdown
–40°C to 125°C operating junction temperature range
Available in small thermally enhanced 8-pin SOIC PowerPAD™ integrated circuit package
Create a custom regulator design using the TPS5430-Q1 with WEBENCH Power Designer

Qualified for automotive applications
Wide input voltage range: 5.5V to 36V
Up to 3A continuous (4A peak) output current
High efficiency up to 95% enabled by 100mΩ integrated MOSFET switch
Wide output voltage range: adjustable down to 1.22V with 1.5% initial accuracy
Internal compensation minimizes external parts count
Fixed 500kHz switching frequency for small filter size
Improved line regulation and transient response by input voltage feed forward
System protected by overcurrent limiting, overvoltage protection, and thermal shutdown
–40°C to 125°C operating junction temperature range
Available in small thermally enhanced 8-pin SOIC PowerPAD™ integrated circuit package
Create a custom regulator design using the TPS5430-Q1 with WEBENCH Power Designer

The TPS5430-Q1 is a high-output current PWM converter that integrates a low-resistance high side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions, an undervoltage lockout (UVLO) circuit to prevent start-up until the input voltage reaches 5.5V, an internally set slow-start circuit to limit inrush currents, and a voltage feed-forward circuit to improve the transient response. Using the enable (ENA) pin, shutdown supply current is reduced to 15µA typically. Other features include an active-high enable, overcurrent limiting, overvoltage protection (OVP), and thermal shutdown. To reduce design complexity and external component count, the TPS5430-Q1 feedback loop is internally compensated. The TPS5430-Q1 regulates a wide variety of power sources including 24V buses.

The TPS5430-Q1 device is available in a thermally enhanced, easy-to-use 8-pin SOIC PowerPAD integrated circuit package. TI provides evaluation modules and the WEBENCH software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.

The TPS5430-Q1 is a high-output current PWM converter that integrates a low-resistance high side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions, an undervoltage lockout (UVLO) circuit to prevent start-up until the input voltage reaches 5.5V, an internally set slow-start circuit to limit inrush currents, and a voltage feed-forward circuit to improve the transient response. Using the enable (ENA) pin, shutdown supply current is reduced to 15µA typically. Other features include an active-high enable, overcurrent limiting, overvoltage protection (OVP), and thermal shutdown. To reduce design complexity and external component count, the TPS5430-Q1 feedback loop is internally compensated. The TPS5430-Q1 regulates a wide variety of power sources including 24V buses.

The TPS5430-Q1 device is available in a thermally enhanced, easy-to-use 8-pin SOIC PowerPAD integrated circuit package. TI provides evaluation modules and the WEBENCH software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.

open-in-new

尋找其它 AC/DC & DC/DC converters (integrated FET)

下載觀看有字幕稿的影片影片

技術文件

star

=TI 所選的此產品重要文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 1

	類型	標題		日期
*	Data sheet	TPS5430-Q1 Automotive, 3A, Wide-Input-Range Step-Down Converter datasheet (Rev. E)	PDF \| HTML	2024年 1月 19日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS5430EVM-173 — TPS5430 35V 輸入、5V 輸出、3A 評估模組

The TPS5430EVM-173 evaluation module allows the designer to evaluate the TPS5430 SWIFT DC/DC converter and is designed with external components to operate over a wide input voltage range. The input voltage range of this module is 9.0 V to 36 V and the output voltage is pre-set to (...)

使用指南: PDF | HTML