首頁 電源管理 AC/DC 和 DC/DC 轉換器 (整合式 FET)

TPS54427

現行

4.5V 至 18V 輸入,4-A 同步降壓轉換器

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 4 Vin (max) (V) 18 Vin (min) (V) 4.5 Vout (max) (V) 7 Vout (min) (V) 0.76 Features Enable, Soft Start Adjustable, Synchronous Rectification Control mode current mode Switching frequency (min) (kHz) 650 Switching frequency (max) (kHz) 650 Operating temperature range (°C) -40 to 85 Iq (typ) (µA) 950 Duty cycle (max) (%) 65 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 4 Vin (max) (V) 18 Vin (min) (V) 4.5 Vout (max) (V) 7 Vout (min) (V) 0.76 Features Enable, Soft Start Adjustable, Synchronous Rectification Control mode current mode Switching frequency (min) (kHz) 650 Switching frequency (max) (kHz) 650 Operating temperature range (°C) -40 to 85 Iq (typ) (µA) 950 Duty cycle (max) (%) 65 Type Converter
HSOIC (DDA) 8 29.4 mm² 4.9 x 6 VSON (DRC) 10 9 mm² 3 x 3
  • D-CAP2™ Mode Enables Fast Transient
    Response
  • Low Output Ripple and Allows Ceramic Output
    Capacitor
  • Wide VIN Input Voltage Range: 4.5 V to 18 V
  • Output Voltage Range: 0.76 V to 7.0 V
  • Highly Efficient Integrated FETs Optimized
    for Lower Duty Cycle Applications
    – 70 mΩ (High Side) and 53 mΩ (Low Side)
  • High Efficiency, Less Than 10 µA at Shutdown
  • High Initial Bandgap Reference Accuracy
  • Adjustable Soft Start
  • Pre-Biased Soft Start
  • 650-kHz Switching Frequency (fSW)
  • Cycle by Cycle Over Current Limit
  • D-CAP2™ Mode Enables Fast Transient
    Response
  • Low Output Ripple and Allows Ceramic Output
    Capacitor
  • Wide VIN Input Voltage Range: 4.5 V to 18 V
  • Output Voltage Range: 0.76 V to 7.0 V
  • Highly Efficient Integrated FETs Optimized
    for Lower Duty Cycle Applications
    – 70 mΩ (High Side) and 53 mΩ (Low Side)
  • High Efficiency, Less Than 10 µA at Shutdown
  • High Initial Bandgap Reference Accuracy
  • Adjustable Soft Start
  • Pre-Biased Soft Start
  • 650-kHz Switching Frequency (fSW)
  • Cycle by Cycle Over Current Limit

The TPS54427 is an adaptive on-time D-CAP2™ mode synchronous buck converter. The TPS54427 enables system designers to complete the suite of various end equipment’s power bus regulators with a cost effective, low component count, low standby current solution.

The main control loop for the TPS54427 uses the D-CAP2™ mode control which provides a fast transient response with no external compensation components.

The TPS54427 also has a proprietary circuit that enables the device to adopt to both low equivalent series resistance (ESR) output capacitors, such as POSCAP or SP-CAP, and ultra-low ESR ceramic capacitors.

The device operates from 4.5-V to 18-V VIN input. The output voltage can be programmed between 0.76 V and 7 V.

The device also features an adjustable soft start time.

The TPS54427 is available in the 8-pin DDA package and 10-pin DRC, and is designed to operate from –40°C to 85°C.

The TPS54427 is an adaptive on-time D-CAP2™ mode synchronous buck converter. The TPS54427 enables system designers to complete the suite of various end equipment’s power bus regulators with a cost effective, low component count, low standby current solution.

The main control loop for the TPS54427 uses the D-CAP2™ mode control which provides a fast transient response with no external compensation components.

The TPS54427 also has a proprietary circuit that enables the device to adopt to both low equivalent series resistance (ESR) output capacitors, such as POSCAP or SP-CAP, and ultra-low ESR ceramic capacitors.

The device operates from 4.5-V to 18-V VIN input. The output voltage can be programmed between 0.76 V and 7 V.

The device also features an adjustable soft start time.

The TPS54427 is available in the 8-pin DDA package and 10-pin DRC, and is designed to operate from –40°C to 85°C.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
TPS54327 現行 4.5V 至 18V 輸入,3-A 同步降壓轉換器 This product offers lower current (3 A).
TPS54527 現行 4.5V 至 18V 輸入,5-A 同步降壓轉換器 This product offers higher current (5 A).
功能與所比較的裝置相似
TPS564247 現行 採用 SOT-563 封裝的 3-V 至 16-V 輸入電壓、4-A FCCM 模式、同步降壓轉換器 This product has a smaller package with 1.2MHz switching frequency
TPS564257 現行 3-V 至 17-V 輸入電壓、4-A FCCM 模式同步降壓轉換器 This product has smaller package and power good feature

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet TPS54427 4.5-V to 18-V Input, 4-A Output Single Synchronous Step-Down Switcher With Integrated FET datasheet (Rev. C) PDF | HTML 2016年 2月 10日
User guide TPS54427 Step-Down Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 2021年 9月 2日
Application note Optimize Output Filter on D-CAP2 for Stability Improvement 2017年 6月 13日
Application note D-CAP2 Frequency Response Model, based on frequency domain analysis of Fixed On- 2013年 1月 2日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS54427EVM-052 — 用於 TPS54427 同步降壓轉換器的評估模組

The TPS54427EVM-052 is a fully assembled and tested circuit for evaluating the TPS54427 synchronous step-down converter. The EVM operates from a 4.5-V to 18-V input and provides a 1.05-V output up to 4 A. The main control loop of TPS54427 uses D-CAP2™ mode control, which provides a very fast (...)

使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPS54427 PSpice Transient Model

SLVM452.ZIP (274 KB) - PSpice Model
參考設計

TIDA-010011 — 用於保護繼電器處理器模組的高效電源供應架構參考設計

此參考設計展示各種電源架構,可為需要 >1A 負載電流和高效率的應用處理器模組產生多重電壓軌。所需的電源是使用來自背板的 5、12 或 24-V DC 輸入所產生。電源供應器是使用配備整合式 FET 的 DC-DC 轉換器,以及具尺寸整合式電感器的電源模組所產生。此設計採用 HotRod™ 封裝類型,適合需要低 EMI 的應用。此外也最適合設計時間有限的應用。其他功能包括 DDR 終端穩壓器、輸入電源 OR-ing、電壓序列、用於過載保護的 eFuse,以及電壓和負載電流監控。此設計可搭配處理器、數位訊號處理器以及現場可編程邏輯閘陣列使用。已通過輻射發射測試,符合 A 類和 B 要求的 (...)
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HSOIC (DDA) 8 Ultra Librarian
VSON (DRC) 10 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片