首頁 電源管理 AC/DC & DC/DC converters (integrated FET)
首頁
電源管理
AC/DC & DC/DC converters (integrated FET)

TPS54541

現行

具緩啟動和 Eco-mode™的 4.5V 至 42V 輸入 5A 降壓 DC-DC 轉換器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的產品不同
LMR51450 現行 36-V、5-A 同步降壓轉換器 Smaller solution size, higher efficiency and lower EMI.
TPSM63606 現行 採用 5-mm x 5.5-mm 強化型 HotRod™ QFN 封裝的高密度、36-V 輸入、1-V 至 16-V 輸出、6-A 電源模組 Save board space, simplify design, and speed up time to market with an integrated-inductor power module.

TPS54541

現行
產品規格表 立即訂購

產品詳細資料

Iout (max) (A) 5 Vin (min) (V) 4.5 Vin (max) (V) 42 Topology Buck Type Converter Switching frequency (min) (kHz) 100 Switching frequency (max) (kHz) 2500 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Tracking, UVLO adjustable Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 41 Rating Catalog Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.000152
Iout (max) (A) 5 Vin (min) (V) 4.5 Vin (max) (V) 42 Topology Buck Type Converter Switching frequency (min) (kHz) 100 Switching frequency (max) (kHz) 2500 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Tracking, UVLO adjustable Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 41 Rating Catalog Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.000152
WSON (DPR) 10 16 mm² 4 x 4
  • High Efficiency at Light Loads with Pulse Skipping Eco-mode™
  • 87-mΩ High-Side MOSFET
  • 152-µA Operating Quiescent Current and 2-µA Shutdown Current
  • 100-kHz to 2.5-MHz Adjustable Switching Frequency
  • Synchronizes to External Clock
  • Low Dropout at Light Loads with Integrated BOOT Recharge FET
  • Adjustable UVLO Voltage and Hysteresis
  • UV and OV Power-Good Output
  • Adjustable Soft-Start and Sequencing
  • 0.8-V 1% Internal Voltage Reference
  • 10-Pin WSON with Thermal Pad Package
  • –40°C to 150°C TJ Operating Range
  • Create a Custom Design using the TPS54541 with the WEBENCH® Power Designer
  • High Efficiency at Light Loads with Pulse Skipping Eco-mode™
  • 87-mΩ High-Side MOSFET
  • 152-µA Operating Quiescent Current and 2-µA Shutdown Current
  • 100-kHz to 2.5-MHz Adjustable Switching Frequency
  • Synchronizes to External Clock
  • Low Dropout at Light Loads with Integrated BOOT Recharge FET
  • Adjustable UVLO Voltage and Hysteresis
  • UV and OV Power-Good Output
  • Adjustable Soft-Start and Sequencing
  • 0.8-V 1% Internal Voltage Reference
  • 10-Pin WSON with Thermal Pad Package
  • –40°C to 150°C TJ Operating Range
  • Create a Custom Design using the TPS54541 with the WEBENCH® Power Designer

The TPS54541 device is a 42-V 5-A step-down regulator with an integrated high-side MOSFET. The device survives load dump pulses up to 45 V per ISO 7637. Current mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode reduces the no-load supply current to 152 µA. When the enable pin is pulled low, the shutdown supply current is reduced to 2 µA.

Undervoltage lockout is internally set at 4.3 V but can increase using an external resistor divider at the enable pin. The output voltage startup ramp is controlled by the soft-start pin that can also be configured for sequencing and tracking. An open-drain power-good signal indicates the output is within 93% to 106% of the nominal voltage.

A wide adjustable switching-frequency range allows for optimization of either efficiency or external component size. Cycle-by-cycle current limit, frequency foldback, and thermal shutdown protect internal and external components during an overload condition.

The TPS54541 device is available in a 10-pin 4-mm × 4-mm WSON package.

The TPS54541 device is a 42-V 5-A step-down regulator with an integrated high-side MOSFET. The device survives load dump pulses up to 45 V per ISO 7637. Current mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode reduces the no-load supply current to 152 µA. When the enable pin is pulled low, the shutdown supply current is reduced to 2 µA.

Undervoltage lockout is internally set at 4.3 V but can increase using an external resistor divider at the enable pin. The output voltage startup ramp is controlled by the soft-start pin that can also be configured for sequencing and tracking. An open-drain power-good signal indicates the output is within 93% to 106% of the nominal voltage.

A wide adjustable switching-frequency range allows for optimization of either efficiency or external component size. Cycle-by-cycle current limit, frequency foldback, and thermal shutdown protect internal and external components during an overload condition.

The TPS54541 device is available in a 10-pin 4-mm × 4-mm WSON package.
open-in-new 尋找其它 AC/DC & DC/DC converters (integrated FET)
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5
類型 標題 日期
* Data sheet TPS54541 4.5-V to 42-V Input, 5-A Step-Down DC-DC Converter With Soft-Start and Eco-mode™ datasheet (Rev. C) PDF | HTML 2017年 1月 20日
EVM User's guide Evaluation Module for the TPS54541 Step-Down Converter 2013年 11月 5日
Application note Creating a Universal Car Charger for USB Devices From the TPS54240 and TPS2511 (Rev. E) 2013年 9月 16日
Application note Create a Split-Rail Power Supply with a Wide Input Voltage Buck Regulator (Rev. A) 2012年 10月 26日
Application note Create an Inverting Power Supply from a Step-Down Regulator (Rev. B) 2012年 10月 26日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS54541EVM-555 — TPS54541EVM-555 - 4.5V 至 42V 輸入 5A 降壓 DC-DC 轉換器評估模組

The TPS54541EVM-555 is a fully assembled and tested circuit for evaluating the TPS54541 Step-Down Converter. The TPS54541EVM-555 operates from a 6.0V to 42V input (12V nominal) and provides a 3.3V output at 5.0A.

使用指南: PDF
TI.com 無法提供
模擬型號

TPS54541 Unencrypted PSpice Transient Model

SLVMCU0.ZIP (6 KB) - PSpice Model
下載
模擬型號

TPS54541 Unencrypted PSpice Transient Model Package (Rev. A)

SLVM981A.ZIP (740 KB) - PSpice Model
下載
計算工具

SLVC452 — TPS54360 and TPS54361 Family Design Excel Tool

支援產品和硬體

支援產品和硬體

產品
AC/DC & DC/DC converters (integrated FET)
TPS54340 — 具 Eco-mode™ 的 42 V 輸出、3.5 A 降壓式 DC/DC 轉換器 TPS54341 — 具緩啟動和 Eco-mode™的 4.5V 至 42V 輸入 3.5A 降壓 DC-DC 轉換器 TPS54360 — 具 Eco-mode 的 4.5V 至 60V 輸入，3.5A 降壓轉換器 TPS54360B — 具有 Eco-Mode™ 的 60V 輸入、3.5A 降壓 DC/DC 轉換器 TPS54361 — 具有緩啟動和 Eco-mode™ 的 4.5V 至 60V 輸入 3.5A 降壓 DC-DC 轉換器 TPS54540 — 具 Eco-Mode 的 42 V、5 A 降壓式 DC-DC 轉換器 TPS54541 — 具緩啟動和 Eco-mode™的 4.5V 至 42V 輸入 5A 降壓 DC-DC 轉換器 TPS54560 — 具 Eco-Mode 的 4.5V 至 60V 輸入、5A 降壓轉換器 TPS54560B — 具 Eco-Mode™ 的 4.5V 至 60V 輸入、5A 降壓 DC-DC 轉換器 TPS54561 — 具緩啟動和 Eco-mode™的 4.5V 至 60V 輸入 5A 降壓 DC-DC 轉換器
硬體開發
開發板
TPS54340EVM-182 — TPS54340 降壓轉換器評估模組 TPS54341EVM-555 — TPS54341EVM-555 4.5 至 60V 輸入 3.5A 降壓 DC-DC 轉換器評估模組 TPS54360EVM-182 — 60V 輸入、3.5A、降壓轉換器評估模組 TPS54361EVM-555 — TPS54361EVM-555 TPS54361 4.5-V 至 60-V 輸入 3.5-A 降壓式 DC/DC 轉換器評估模組 TPS54541EVM-555 — TPS54541EVM-555 - 4.5V 至 42V 輸入 5A 降壓 DC-DC 轉換器評估模組 TPS54560EVM-515 — TPS54560 降壓 DC-DC 轉換器評估模組 TPS54561EVM-555 — TPS54561EVM-555 - 60V 輸入 5A 降壓 DC-DC 轉換器評估模組
下載
參考設計

PMP15018 — 具有 15V – 42V 輸入以及 1.2V@10A 和 1V@10A 雙路輸出的工業電源參考設計

The PMP15018 reference design incorporates the TPS54541 42V 5A DC/DC converter and two TPS56C215 17V, 12A DC/DC converters.  The solution operates from 15V to 42V input and generates 1.0V @10A and 1.2V@10A voltage rails.  The 1.0V and 1.2V converters operate at 1MHz and 400kHz (...)
Test report: PDF
電路圖: PDF
封裝 引腳 下載
WSON (DPR) 10 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片