首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器

TPS552852

現行

22V、8A 降壓升壓轉換器

產品詳細資料

Rating Catalog Topology Buck-Boost Vin (max) (V) 22 Vin (min) (V) 2.4 Vout (max) (V) 15 Vout (min) (V) 0.8 Switch current limit (typ) (A) 8 Features Adjustable current limit, Dynamic voltage scaling, Enable, Frequency synchronization, Light-load efficiency, Load Disconnect, Output discharge, Spread Spectrum, Synchronous rectification, USB C/PD compatible, UVLO adjustable EMI features Frequency Dithering, Spread Spectrum Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00072 Duty cycle (max) (%) 100
Rating Catalog Topology Buck-Boost Vin (max) (V) 22 Vin (min) (V) 2.4 Vout (max) (V) 15 Vout (min) (V) 0.8 Switch current limit (typ) (A) 8 Features Adjustable current limit, Dynamic voltage scaling, Enable, Frequency synchronization, Light-load efficiency, Load Disconnect, Output discharge, Spread Spectrum, Synchronous rectification, USB C/PD compatible, UVLO adjustable EMI features Frequency Dithering, Spread Spectrum Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00072 Duty cycle (max) (%) 100
WQFN-HR (VAL) 15 8.75 mm² (3.5 mm × 2.5 mm)
  • Wide input and output voltage range
    • Wide input voltage range: 2.4V to 22V
    • Minimum input voltage for start-up: 3.0V
    • Wide output voltage range: 0.8V to 15V
    • Reference voltage accuracy: ±1%
    • Programmable output current limit
  • High efficiency over entire load range
    • 94.3% efficiency at VIN = 12V, VOUT = 12V and IOUT = 5A
  • Rich protection features
    • Input overvoltage protection
    • Output relative overvoltage protection
    • Hiccup mode for output short-circuit protection
    • Programmable PFM and FPWM mode at light load
    • Thermal shutdown protection
    • Average inductor current limit: 8A
  • Small design size
    • Four low RDS(ON) internal MOSFETs
    • High switching frequency: 2.1MHz
    • 2.5mm × 3.5mm HotRod™ WQFN package
  • Wide input and output voltage range
    • Wide input voltage range: 2.4V to 22V
    • Minimum input voltage for start-up: 3.0V
    • Wide output voltage range: 0.8V to 15V
    • Reference voltage accuracy: ±1%
    • Programmable output current limit
  • High efficiency over entire load range
    • 94.3% efficiency at VIN = 12V, VOUT = 12V and IOUT = 5A
  • Rich protection features
    • Input overvoltage protection
    • Output relative overvoltage protection
    • Hiccup mode for output short-circuit protection
    • Programmable PFM and FPWM mode at light load
    • Thermal shutdown protection
    • Average inductor current limit: 8A
  • Small design size
    • Four low RDS(ON) internal MOSFETs
    • High switching frequency: 2.1MHz
    • 2.5mm × 3.5mm HotRod™ WQFN package

The TPS552852 is a fully-integrated ,synchronous buck-boost converter that is optimized for converting battery voltage or adapter voltage into power supply rails. The TPS552852 integrates four 15mΩ MOSFETs to provide a high efficiency and small size design.

The TPS552852 has a wide input voltage range from 2.4V (3.0V rising) to 22V and capable of outputting 0.8V to 15V voltage to support a variety of applications. The device features 8A average inductor current limit and can supply up to 7A output current in buck mode.

The TPS552852 offers input and output overvoltage protection, average inductor current limit, cycle-by-cycle peak current limit, and output short-circuit protection. The TPS552852 is also designed for safe operating with output current limit without external output current sense resistor and hiccup mode protection in sustained overload conditions.

The TPS552852 allows the use of small inductor and capacitor with high switching frequency. The TPS552852 is available in a 2.5mm × 3.5mm QFN package.

The TPS552852 is a fully-integrated ,synchronous buck-boost converter that is optimized for converting battery voltage or adapter voltage into power supply rails. The TPS552852 integrates four 15mΩ MOSFETs to provide a high efficiency and small size design.

The TPS552852 has a wide input voltage range from 2.4V (3.0V rising) to 22V and capable of outputting 0.8V to 15V voltage to support a variety of applications. The device features 8A average inductor current limit and can supply up to 7A output current in buck mode.

The TPS552852 offers input and output overvoltage protection, average inductor current limit, cycle-by-cycle peak current limit, and output short-circuit protection. The TPS552852 is also designed for safe operating with output current limit without external output current sense resistor and hiccup mode protection in sustained overload conditions.

The TPS552852 allows the use of small inductor and capacitor with high switching frequency. The TPS552852 is available in a 2.5mm × 3.5mm QFN package.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS552852 22V, 8A Full Integrated Buck-Boost Converter datasheet PDF | HTML 2026/3/23

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS552852EVM — TPS552852 評估模組

TPS552852EVM 可協助評估 TPS552852 在不同輸入電壓、輸出電壓與負載條件下的行為與性能。此 EVM 專為 2.4V 至 22V 輸入電壓和 12V 預設輸出電壓應用所設計。此 EVM 具有 Vin、Vout、SW1、SW2、VCC 測試點,及波德圖測試,還具有可設定輕負載模式和 PG 功能的跳線。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN-HR (VAL) 15 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片