首頁 電源管理 AC/DC 和 DC/DC 轉換器 (整合式 FET)

TPS568230

現行

針對解決方案成本進行最佳化的 4.5V 至 18V、8A 同步 SWIFT™ 降壓轉換器

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 8 Vin (max) (V) 18 Vin (min) (V) 4.5 Vout (max) (V) 7 Vout (min) (V) 0.6 Features Enable, Forced PWM, Light-load efficiency, Overcurrent protection, Power good, Soft-start adjustable, Synchronous rectification Control mode D-CAP3 Switching frequency (min) (kHz) 600 Switching frequency (max) (kHz) 1000 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 110 Duty cycle (max) (%) 85 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 8 Vin (max) (V) 18 Vin (min) (V) 4.5 Vout (max) (V) 7 Vout (min) (V) 0.6 Features Enable, Forced PWM, Light-load efficiency, Overcurrent protection, Power good, Soft-start adjustable, Synchronous rectification Control mode D-CAP3 Switching frequency (min) (kHz) 600 Switching frequency (max) (kHz) 1000 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 110 Duty cycle (max) (%) 85 Type Converter
VQFN-HR (RJE) 20 9 mm² 3 x 3
  • Input voltage range: 4.5 V to 18 V
  • D-CAP3™ architecture control for fast transient response
  • Output voltage range: 0.6 V to 7 V
  • 0.6-V±1% reference voltage (25°C)
  • Supports 8-A continuous output current
  • Integrated 19.5-mΩ and 9.5-mΩ RDS(on) internal power MOSFET
  • ULQ™(Ultra Low Quiescent current) feature to enable long battery life
  • Selectable operation modes:
    • Forced continuous conduction mode (FCCM)
    • Out-of-Audio™(OOA) Mode
    • Advanced Eco-Mode™
  • Selectable 600-kHz, 800-kHz and 1-MHz switching frequency
  • Supports up to 90% duty operation
  • Adjustable soft start time by SS pin
  • Power good output
  • Built-in output discharge function
  • Cycle-by-cycle over current protection
  • Non-latched for fault protection
  • Small 3.0-mm × 3.0-mm HotRod™ QFN package
  • Input voltage range: 4.5 V to 18 V
  • D-CAP3™ architecture control for fast transient response
  • Output voltage range: 0.6 V to 7 V
  • 0.6-V±1% reference voltage (25°C)
  • Supports 8-A continuous output current
  • Integrated 19.5-mΩ and 9.5-mΩ RDS(on) internal power MOSFET
  • ULQ™(Ultra Low Quiescent current) feature to enable long battery life
  • Selectable operation modes:
    • Forced continuous conduction mode (FCCM)
    • Out-of-Audio™(OOA) Mode
    • Advanced Eco-Mode™
  • Selectable 600-kHz, 800-kHz and 1-MHz switching frequency
  • Supports up to 90% duty operation
  • Adjustable soft start time by SS pin
  • Power good output
  • Built-in output discharge function
  • Cycle-by-cycle over current protection
  • Non-latched for fault protection
  • Small 3.0-mm × 3.0-mm HotRod™ QFN package

The TPS568230 is a cost effective, high-voltage input, high efficiency synchronous buck converter with integrated MOSFETs.

The TPS568230 has the ULQ™ (Ultra Low Quiescent current) feature to enable low-bias current. It operates with supply input voltage from 4.5 V to 18 V. It uses DCAP3™ control mode to provide fast transient response, good line, load regulation, no requirement for external compensation, and support low equivalent series resistance (ESR) output capacitors such as specialty polymer and ultra-low ESR ceramic capacitors.

The TPS568230 provides complete Over-voltage, Under-voltage, Over-current, Over-temperature and Under-voltage lock-out protections. It is combined power good signal , output discharge function and large duty operation feature.

TPS568230 is equipped with a MODE pin to select the desirable mode of operation. To attain high efficiency at light load, OOA mode and Advanced Eco-mode™ could be selected. OOA mode will not allow the part to go below audible frequency ( below 25kHz switching frequency ). FCCM is also available to support tight output voltage ripple requirement.

The TPS568230 supports both internal and external soft-start time option. The internal fixed soft-start time is 1.3 ms. Longer soft-start time can be get by connecting the external capacitor on SS pin.

The TPS568230 is available in a 20-pin 3.0-mm x 3.0-mm HotRod™ package and the junction temperature is specified from -40oC to 125oC.

The TPS568230 is a cost effective, high-voltage input, high efficiency synchronous buck converter with integrated MOSFETs.

The TPS568230 has the ULQ™ (Ultra Low Quiescent current) feature to enable low-bias current. It operates with supply input voltage from 4.5 V to 18 V. It uses DCAP3™ control mode to provide fast transient response, good line, load regulation, no requirement for external compensation, and support low equivalent series resistance (ESR) output capacitors such as specialty polymer and ultra-low ESR ceramic capacitors.

The TPS568230 provides complete Over-voltage, Under-voltage, Over-current, Over-temperature and Under-voltage lock-out protections. It is combined power good signal , output discharge function and large duty operation feature.

TPS568230 is equipped with a MODE pin to select the desirable mode of operation. To attain high efficiency at light load, OOA mode and Advanced Eco-mode™ could be selected. OOA mode will not allow the part to go below audible frequency ( below 25kHz switching frequency ). FCCM is also available to support tight output voltage ripple requirement.

The TPS568230 supports both internal and external soft-start time option. The internal fixed soft-start time is 1.3 ms. Longer soft-start time can be get by connecting the external capacitor on SS pin.

The TPS568230 is available in a 20-pin 3.0-mm x 3.0-mm HotRod™ package and the junction temperature is specified from -40oC to 125oC.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
TPS51396A 現行 4.5V 至 24V、8A 同步降壓穩壓器 Offers wider VIN, optimized for lower IOUT.
TPS56C230 現行 針對解決方案成本進行最佳化的 4.5V 至 18V、12A 同步 SWIFT™ 降壓轉換器 Optimized for higher current.
功能與所比較的裝置相似
TPS568231 現行 具 D-CAP3 控制功能的 3.8-V 至 17-V、8-A 同步降壓轉換器 Higher efficiency and thermal performance 8A converter
TPS568236 現行 具有導通時間 D-CAP3™ 控制模式的 4.5V 至 18V 輸入、8A 同步降壓穩壓器 Smaller-size 600KHz switching-frequency 8A converter

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 12
類型 標題 日期
* Data sheet TPS568230 4.5-V to 18-V Input, 8-A Synchronous Step-Down Voltage Regulator datasheet (Rev. C) PDF | HTML 2019年 8月 8日
Application note How the Switching Frequency Affects the Performance of Buck Converter (Rev. A) PDF | HTML 2024年 4月 16日
Application note Peak Current Mode Converter Secondary Stage Filter Design for Low Ripple Power – Part II: Hybrid Sense Network PDF | HTML 2024年 2月 27日
Application note 8-A DC/DC Buck Converter Selection Guide of Mid-range VIN (1.5 V - 28 V) PDF | HTML 2023年 10月 6日
Application note Measuring the Bode Plot of D-CAP™, D-CAP2™, and D-CAP3™ DC/DC Converters (Rev. A) PDF | HTML 2023年 4月 21日
Application note Stability Analysis and Design of D-CAP2 and D-CAP3 Converter – Part 2 PDF | HTML 2021年 8月 2日
Application note Stability Analysis and Design of D-CAP2 and D-CAP3 Converter – Part 1 PDF | HTML 2021年 6月 9日
Selection guide Buck Converter Quick Reference Guide (Rev. B) 2021年 4月 8日
Certificate TPS568230EVM EU RoHS Declaration of Conformity (DoC) 2020年 9月 17日
Application note Large Duty Cycle Operation With the TPS568230 2020年 3月 31日
Technical article How to choose a DC/DC converter for a storage application PDF | HTML 2019年 5月 9日
Application note Understanding OOA Operation Mode 2019年 2月 15日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS568230EVM — 8-A 同步降壓穩壓器評估模組

TPS568230 評估模組 (EVM) 是完全組裝且經過測試的電路,用於評估 TPS568230 降壓轉換器。TPS568230EVM 可在 4.5V 至 18V 輸入之間運作(12-V 額定值),並提供 1.05V、8A 輸出。多個跨接器和開關允許使用者評估不同的控制功能、內部或外部 SS,以及啟用或停用。
使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPS568230 PSpice Transient Model

SLVMCZ2.ZIP (100 KB) - PSpice Model
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN-HR (RJE) 20 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片